Hi everyone, I have seven cameras and an NVR, all purchased through EmpireTech on Amazon. They are all running the [I think] latest firmware:
I have all the standard settings (live/sub/recording) working as expected, but I can't seem to get motion to show up in the NVR. Here are the camera settings:
![1669322086556.png](/data/attachments/146/146543-3cfe2634e88823d0a29dab7fac252fa4.jpg)
![1669322109832.png](/data/attachments/146/146544-d7f7318858601c6d0b05077117b1b282.jpg)
![1669322138576.png](/data/attachments/146/146545-89295a587ab1bbcf65cd19101a2a5cce.jpg)
The NVR records (there are a few gaps at the end when I was changing settings), but I never see any yellow for motion:
![1669322197479.png](/data/attachments/146/146546-8b9b2b17bd31c47ac2bb8a50fdd362a0.jpg)
What am I missing? Is there anything I need to change or enable for it to work? Thanks!
- Cameras: IPC-T2231T-ZS, firmware 2.820.0000000.48.R, Build Date: 2022-06-14
- NVR: NVR5208-4KS2, firmware V4.001.0000006.1, Build Date: 2021-07-09
I have all the standard settings (live/sub/recording) working as expected, but I can't seem to get motion to show up in the NVR. Here are the camera settings:
![1669322086556.png](/data/attachments/146/146543-3cfe2634e88823d0a29dab7fac252fa4.jpg)
![1669322109832.png](/data/attachments/146/146544-d7f7318858601c6d0b05077117b1b282.jpg)
![1669322138576.png](/data/attachments/146/146545-89295a587ab1bbcf65cd19101a2a5cce.jpg)
The NVR records (there are a few gaps at the end when I was changing settings), but I never see any yellow for motion:
![1669322197479.png](/data/attachments/146/146546-8b9b2b17bd31c47ac2bb8a50fdd362a0.jpg)
What am I missing? Is there anything I need to change or enable for it to work? Thanks!