Hi Everyone,
I just purchased a new 4K-T Camera from Empiretech and I am pretty impressed with the low light performance. Its replaced a 4K Lorex with a 2.8 Sensor that had a smart illuminator spotlight that worked fairly well. Unfortunately, it looks like the new 4K-T doesn't have that functionality. I am wondering it anyone knows the proper API command to enable the illuminator. I am hoping to setup a trigger that when blue iris detects a person (running Codeproject AI), it could turn the illuminator on like a spotlight.
Is this possible?
When I run the command cgi-bin/configManager.cgi?action=getConfig&name=Lighting , I get the following:
table.Lighting[0][0].Correction=50
table.Lighting[0][0].MiddleLight[0].Angle=50
table.Lighting[0][0].MiddleLight[0].Light=50
table.Lighting[0][0].Mode=Manual
table.Lighting[0][0].Sensitive=3
table.Lighting[0][1].Correction=50
table.Lighting[0][1].MiddleLight[0].Angle=50
table.Lighting[0][1].MiddleLight[0].Light=50
table.Lighting[0][1].Mode=Manual
table.Lighting[0][1].Sensitive=3
table.Lighting[0][2].Correction=50
table.Lighting[0][2].MiddleLight[0].Angle=50
table.Lighting[0][2].MiddleLight[0].Light=50
table.Lighting[0][2].Mode=Auto
table.Lighting[0][2].Sensitive=3
table.Lighting[0][3].Correction=50
table.Lighting[0][3].MiddleLight[0].Angle=50
table.Lighting[0][3].MiddleLight[0].Light=50
table.Lighting[0][3].Mode=Auto
table.Lighting[0][3].Sensitive=3
"table.Lighting[0][1].Mode=Manual" Will be modified between Auto, Manual and Off with what corresponds with the Web GUI, however, if I send an HTTP request to turn it to auto or manual, the camera will give me an "OK" in the browser, the table will update, but the light doesn't change on or off and neither does the actual web UI. Could the illuminator light be under a different API command?
Does anyone have any ideas?
Thanks for any help you can provide.
I just purchased a new 4K-T Camera from Empiretech and I am pretty impressed with the low light performance. Its replaced a 4K Lorex with a 2.8 Sensor that had a smart illuminator spotlight that worked fairly well. Unfortunately, it looks like the new 4K-T doesn't have that functionality. I am wondering it anyone knows the proper API command to enable the illuminator. I am hoping to setup a trigger that when blue iris detects a person (running Codeproject AI), it could turn the illuminator on like a spotlight.
Is this possible?
When I run the command cgi-bin/configManager.cgi?action=getConfig&name=Lighting , I get the following:
table.Lighting[0][0].Correction=50
table.Lighting[0][0].MiddleLight[0].Angle=50
table.Lighting[0][0].MiddleLight[0].Light=50
table.Lighting[0][0].Mode=Manual
table.Lighting[0][0].Sensitive=3
table.Lighting[0][1].Correction=50
table.Lighting[0][1].MiddleLight[0].Angle=50
table.Lighting[0][1].MiddleLight[0].Light=50
table.Lighting[0][1].Mode=Manual
table.Lighting[0][1].Sensitive=3
table.Lighting[0][2].Correction=50
table.Lighting[0][2].MiddleLight[0].Angle=50
table.Lighting[0][2].MiddleLight[0].Light=50
table.Lighting[0][2].Mode=Auto
table.Lighting[0][2].Sensitive=3
table.Lighting[0][3].Correction=50
table.Lighting[0][3].MiddleLight[0].Angle=50
table.Lighting[0][3].MiddleLight[0].Light=50
table.Lighting[0][3].Mode=Auto
table.Lighting[0][3].Sensitive=3
"table.Lighting[0][1].Mode=Manual" Will be modified between Auto, Manual and Off with what corresponds with the Web GUI, however, if I send an HTTP request to turn it to auto or manual, the camera will give me an "OK" in the browser, the table will update, but the light doesn't change on or off and neither does the actual web UI. Could the illuminator light be under a different API command?
Does anyone have any ideas?
Thanks for any help you can provide.