Zosi IPC-2615D

I

IMPALA3525

n3wb
Sep 26, 2023
9
2
MS
Good Morning guys,

I had been having trouble with my Zosi IPC-2615D and Zosi 1828D working together. So I attempted to update the firmware on the IPC-2615D. After updating I must of chose the wrong firmware because the camera will not come online. Is there a way to manually recovery the firmware.. I see lots of guys doing the recovery with Hikvision but I havnt seen any with Zosi
 
IMPALA3525 said:
I had been having trouble with my Zosi IPC-2615D and Zosi 1828D working together.
Click to expand...
Are those both cams or is one a NVR?

What do you mean by "having trouble with <them> working together" ?
 
The Zosi 1828D kept disconnecting randomly and would go offline. At Random times the camera would come back online.

So I updated the firmware for the 1828d. Then i updated the firmware for the 2615d. Both are ip cameras I'm not using a nvr.

I would really like to get the 2615d working again. But don't know where to start.

Using searchtool v2 none of my cameras are being pinged..192.168.138.xxx

I feel like the firmware messed the boot loader or something up. When. I observed the Poe switch the LEDs on the switch port light up like it's communicating then the led turns off blinks 2 times then it keeps during this repeatly.

I have seen some guys recover the division cameras using python but I'm not sure it will work for zosi
 
Jeez, sorry 'bout that.

A little late for this but did you inspect the connections, try different cables, POE port, etc. before getting out that big firmware hammer?
 
  • Like
Reactions: looney2ns
I narrowed it down to being a issue with the 1828D it's self. I added a POE injector to the 1828D and it seems to have a good solid network connection now. But the 2615D are offline. I am trying to figure out the ip address of them using wireshark but ive been unsuccessful. Next I'm about to try to log into my router and see if I can spot the 2 cameras. I'm just hoping they are broadcasting some type of network so I can get them back.
 
  • Like
Reactions: mat200
After doing some research I attempted to recovery the firmware using the tftp method but my poe cam is not connecting to it. I tried changing my ip to the Zosi factory ip which is 192.168.138.x then used there search tool and that didnt work. Tried changing my ip to the ip range the camera was before the firmware which was 10.0.0.102. Still nothing.

Took the camera apart looking for some type of jumper to reset it and found nothing. Then tried plugging the cameras ethernet jack directly into my pc's ethernet port then running wireshark to see if I can see if the camera is looking for firmware. no luck here either

When I plug the cams into the pc nic it starts to communicate for about 10 secs then turns off then stays on 10 secs does this over and over.

Looks like I may have to try USB to TTL method.

Heres the info from wireshack when only the camera is plugged into the PC's NIC

Frame 22: 342 bytes on wire (2736 bits), 342 bytes captured (2736 bits) on interface \Device\NPF_{19522AC7-851B-4844-B348-252356A7A390}, id 0
Section number: 1
Interface id: 0 (\Device\NPF_{19522AC7-851B-4844-B348-252356A7A390})
Interface name: \Device\NPF_{19522AC7-851B-4844-B348-252356A7A390}
Interface description: Ethernet
Encapsulation type: Ethernet (1)
Arrival Time: Oct 1, 2023 07:08:44.142324000 Pacific Daylight Time
[Time shift for this packet: 0.000000000 seconds]
Epoch Time: 1696169324.142324000 seconds
[Time delta from previous captured frame: 0.923747000 seconds]
[Time delta from previous displayed frame: 0.923747000 seconds]
[Time since reference or first frame: 397.840549000 seconds]
Frame Number: 22
Frame Length: 342 bytes (2736 bits)
Capture Length: 342 bytes (2736 bits)
[Frame is marked: False]
[Frame is ignored: False]
[Protocols in frame: eth:ethertype:ip:udp:dhcp]
[Coloring Rule Name: UDP]
[Coloring Rule String: udp]
Ethernet II, Src: G-ProCom_73:8c:0a (00:23:24:73:8c:0a), Dst: Broadcast (ff:ff:ff:ff:ff:ff)
Internet Protocol Version 4, Src: 0.0.0.0, Dst: 255.255.255.255
User Datagram Protocol, Src Port: 68, Dst Port: 67
Source Port: 68
Destination Port: 67
Length: 308
Checksum: 0x3f78 [unverified]
[Checksum Status: Unverified]
[Stream index: 0]
[Timestamps]
[Time since first frame: 397.840549000 seconds]
[Time since previous frame: 32.982906000 seconds]
UDP payload (300 bytes)
Dynamic Host Configuration Protocol (Discover)
Message type: Boot Request (1)
Hardware type: Ethernet (0x01)
Hardware address length: 6
Hops: 0
Transaction ID: 0x4ea6543c
Seconds elapsed: 0
Bootp flags: 0x8000, Broadcast flag (Broadcast)
1... .... .... .... = Broadcast flag: Broadcast
.000 0000 0000 0000 = Reserved flags: 0x0000
Client IP address: 0.0.0.0
Your (client) IP address: 0.0.0.0
Next server IP address: 0.0.0.0
Relay agent IP address: 0.0.0.0
Client MAC address: G-ProCom_73:8c:0a (00:23:24:73:8c:0a)
Client hardware address padding: 00000000000000000000
Server host name not given
Boot file name not given
Magic cookie: DHCP
Option: (53) DHCP Message Type (Discover)
Length: 1
DHCP: Discover (1)
Option: (61) Client identifier
Length: 7
Hardware type: Ethernet (0x01)
Client MAC address: G-ProCom_73:8c:0a (00:23:24:73:8c:0a)
Option: (12) Host Name
Length: 15
Host Name: DESKTOP-083Q3R6
Option: (60) Vendor class identifier
Length: 8
Vendor class identifier: MSFT 5.0
Option: (55) Parameter Request List
Length: 14
Parameter Request List Item: (1) Subnet Mask
Parameter Request List Item: (3) Router
Parameter Request List Item: (6) Domain Name Server
Parameter Request List Item: (15) Domain Name
Parameter Request List Item: (31) Perform Router Discover
Parameter Request List Item: (33) Static Route
Parameter Request List Item: (43) Vendor-Specific Information
Parameter Request List Item: (44) NetBIOS over TCP/IP Name Server
Parameter Request List Item: (46) NetBIOS over TCP/IP Node Type
Parameter Request List Item: (47) NetBIOS over TCP/IP Scope
Parameter Request List Item: (119) Domain Search
Parameter Request List Item: (121) Classless Static Route
Parameter Request List Item: (249) Private/Classless Static Route (Microsoft)
Parameter Request List Item: (252) Private/Proxy autodiscovery
Option: (255) End
Option End: 255
Padding: 00000000
 
  • Like
Reactions: mat200
TonyR said:
Jeez, sorry 'bout that.

A little late for this but did you inspect the connections, try different cables, POE port, etc. before getting out that big firmware hammer?
Click to expand...

Yes I tried connecting the cameras to other ports on the POE switch. On the POE switch the ports that the cameras connect to show activity for about 10 or more secs then the port goes off then comes back on over and over
 
The USB to Serial cable arrived yesterday. Was able to get a reponse using Putty and setting the rate to 112000. This is what im seeing now.

System startup

Uncompress Ok!

U-Boot 2016.11-g7155f55-dirty (Jul 28 2021 - 20:05:33 +0800)hi3516ev300

Relocation Offset is: 07730000
Relocating to 47f30000, new gd at 47ecfef0, sp at 47ecfed0
SPI Nor: hifmc_ip_ver_check(44): Check Flash Memory Controller v100 ...hifmc_ip_ver_check(50): Found
hifmc_spi_nor_probe(1683): SPI Nor ID Table Version 1.0
hifmc_spi_nor_probe(1708): SPI Nor(cs 0) ID: 0x1c 0x40 0x18
hifmc_spi_nor_probe(1773): Block:64KB hifmc_spi_nor_probe(1774): Chip:16MB hifmc_spi_nor_probe(1775): Name:"GM25Q128A"
hifmc100_spi_nor_probe(147): SPI Nor total size: 16MB
NAND: 0 MiB
MMC: Card did not respond to voltage select!
No SD device found !
hisi-sdhci: 0
In: serial
Out: serial
Err: serial
Net: eth0
Warning: eth0 (eth0) using random MAC address - 96:1c:cb:5a:48:33

Hit any key to stop autoboot: 0
hisilicon # <INTERRUPT>
hisilicon #
 
In the U-boot console I tried running the command "dhcp" command

hisilicon # dhcp
Hisilicon ETH net controler
MAC address invalid!
Set Random MAC address: d6:ef:4a:39:5f:b8
eth0 : phy status change : LINK=UP : DUPLEX=FULL : SPEED=100M
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
DHCP client bound to address 10.0.0.32 (3221 ms)
*** Warning: no boot file name; using '0A000020.img'
Using eth0 device
TFTP from server 10.0.0.1; our IP address is 10.0.0.32
Filename '0A000020.img'.
Load address: 0x40080000
Loading: T T T T T T T T T T
Retry count exceeded; starting again
hisilicon #


I set the IP address of my PC to 10.0.0.1 and setup a tftp server using tftpd and I never seen the camera connect to the server..

Anyone have any advice or anything that would help.

I have the original firmware which is a .img file andd I transferred the file to the cam using Ymodem it receives the file but no changes...
 
This is what happens when I boot thru the console

[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x112c0070: 0x00001000 --> 0x00001000
[sys_config: loading out-of-tree module taints kernel.
END]
*** Board tools : ver0.0.1clock=3
_20121120 ***
[debug]: {source==== online_flag=0, cmos_yuv_flag=0, sensor=f23, chip=hi3516ev300, board=demo====
/utils/cmdshell.c:168}cmdstr:him==== g_quick_start_flag=0 ====
m
0x112c0074: 0x00001000 --> 0xsysconfig init success!
00001000
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x112c001c: 0x00001000 --> 0x00001A02
[END]
sh: 50M: bad number
mmz_start: 0x43200000, mmz_size: 78M
Module himedia: init ok
Hisilicon Media Memory Zone Manager
hi_osal 1.0 init success!
hi3516ev200_base: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
load sys.ko for Hi3516EV200...OK!
load tde.ko for HI3516EV200...OK!
load region.ko for Hi3516EV200...OK!
load vgs.ko for Hi3516EV200...OK!
load vi.ko for Hi3516EV200...OK !
ISP Mod init!
load vpss.ko for Hi3516EV200...OK!
load chnl.ko for Hi3516EV200...OK!
load vedu.ko for Hi3516EV200...OK!
load rc.ko for Hi3516EV200...OK!
load venc.ko for Hi3516EV200...OK!
load h264e.ko for Hi3516EV200...OK!
load h265e.ko for Hi3516EV200...OK!
load jpege.ko for Hi3516EV200...OK!
load ive.ko for Hi3516EV200...OK!
register dev
Hisilicon Watchdog Timer: 0.01 initialized. default_margin=60 sec (nodeamon= 0)
hiwtdg init ok. ver=Oct 18 2019, 18:21:00.
gpio_0_base_addr_virtual:0xc4380000 !
gpio_0_base_addr_virtual:0xc43a0000 !
RTW: module init start
RTW: rtl88x2cu v5.9.0.4_36631.20200423_COEX20200103-1717
RTW: build time: Nov 24 2020 02:48:55
RTW: rtl88x2cu BT-Coex version = COEX20200103-1717
usbcore: registered new interface driver rtl88x2cu
RTW: module init ret=0
insert audio
load mipi_rx driver successful!
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x120b1400: 0x00000001 --> 0x00000001
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x120b1004: 0x00000001 --> 0x00000000
[END]
./start.sh: line 41: ./NewIPCam.exe: not found
############### /app/bin/applauncher
++++++++++ thread create! [applauncher][-1230498624]
++++++++++ thread create! [applauncher][-1229450048]
++++++++++ thread create! [applauncher][-1228401472]

------ Message Queues --------
key msqid owner perms used-bytes messages
0x6702008b 0 root 666 0 0

before close, disable failed!
The Watchdog timeout is 30 seconds
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
start reboot !!
umount: /dev/shm/ busy - remounted read-only
umount: devtmpfs busy - remounted read-only
umount: can't remount /dev/root read-only
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system reboot
reboot: Restarting system



System startup

Uncompress Ok!

U-Boot 2016.11-g7155f55-dirty (Jul 28 2021 - 20:05:33 +0800)hi3516ev300

Relocation Offset is: 07730000
Relocating to 47f30000, new gd at 47ecfef0, sp at 47ecfed0
SPI Nor: hifmc_ip_ver_check(44): Check Flash Memory Controller v100 ...hifmc_ip_ver_check(50): Found
hifmc_spi_nor_probe(1683): SPI Nor ID Table Version 1.0
hifmc_spi_nor_probe(1708): SPI Nor(cs 0) ID: 0x1c 0x40 0x18
hifmc_spi_nor_probe(1773): Block:64KB hifmc_spi_nor_probe(1774): Chip:16MB hifmc_spi_nor_probe(1775): Name:"GM25Q128A"
hifmc100_spi_nor_probe(147): SPI Nor total size: 16MB
NAND: 0 MiB
MMC: Card did not respond to voltage select!
No SD device found !
hisi-sdhci: 0
In: serial
Out: serial
Err: serial
Net: eth0
Warning: eth0 (eth0) using random MAC address - 96:1c:cb:5a:48:33

Hit any key to stop autoboot: 0
device 0 offset 0x60000, size 0x240000

SF: 2359296 bytes @ 0x60000 Read: OK
## Booting kernel from Legacy Image at 42000000 ...
Image Name: Linux-4.9.37
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2198004 Bytes = 2.1 MiB
Load Address: 40008000
Entry Point: 40008000
Loading Kernel Image ... OK

Starting kernel ...

Booting Linux on physical CPU 0x0
Linux version 4.9.37 (root@ubuntu) (gcc version 6.3.0 (HC&C V100R002C00B032_20190114) ) #44 Mon Jul 26 14:48:55 CST 2021
CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d
CPU: div instructions available: patching division code
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
OF: fdt:Machine model: Hisilicon HI3516EV200 DEMO Board
Memory policy: Data cache writeback
CPU: All CPU(s) started in SVC mode.
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 12700
Kernel command line: mem=50M console=ttyAMA0,115200 root=/dev/mtdblock2 rootfstype=jffs2 rw mtdparts=hi_sfc:384K(boot),2304K(kernel),13696K(rootfs)
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 44568K/51200K available (4452K kernel code, 134K rwdata, 1044K rodata, 164K init, 222K bss, 6632K reserved, 0K cma-reserved)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xc3800000 - 0xff800000 ( 960 MB)
lowmem : 0xc0000000 - 0xc3200000 ( 50 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc0461470 (4454 kB)
.init : 0xc0569000 - 0xc0592000 ( 164 kB)
.data : 0xc0592000 - 0xc05b3a60 ( 135 kB)
.bss : 0xc05b5000 - 0xc05ec838 ( 223 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:16 nr_irqs:16 16
Gic dist init...
arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
Switching to timer-based delay loop, resolution 20ns
clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=500000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x40008200 - 0x40008258
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 256 (order: -1, 3072 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
Serial: AMBA PL011 UART driver
12040000.uart: ttyAMA0 at MMIO 0x12040000 (irq = 20, base_baud = 0) is a PL011 rev2
console [ttyAMA0] enabled
12041000.uart: ttyAMA1 at MMIO 0x12041000 (irq = 21, base_baud = 0) is a PL011 rev2
12042000.uart: ttyAMA2 at MMIO 0x12042000 (irq = 22, base_baud = 0) is a PL011 rev2
ssp-pl022 12070000.spi: ARM PL022 driver, device ID: 0x00800022
ssp-pl022 12070000.spi: mapped registers from 0x12070000 to c386f000
ssp-pl022 12071000.spi: ARM PL022 driver, device ID: 0x00800022
ssp-pl022 12071000.spi: mapped registers from 0x12071000 to c3873000
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
workingset: timestamp_bits=30 max_order=14 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
jffs2: version 2.2 (NAND) (ZLIB) (RTIME) (c) 2001-2006 Red Hat, Inc.
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
brd: module loaded
hisi-sfc hisi_spi_nor.0: SPI Nor ID Table Version 1.2
hisi-sfc hisi_spi_nor.0: all blocks is unlocked.
hisi-sfc hisi_spi_nor.0: gm25q128a (Chipsize 16 Mbytes, Blocksize 64KiB)
3 cmdlinepart partitions found on MTD device hi_sfc
3 cmdlinepart partitions found on MTD device hi_sfc
Creating 3 MTD partitions on "hi_sfc":
0x000000000000-0x000000060000 : "boot"
0x000000060000-0x0000002a0000 : "kernel"
0x0000002a0000-0x000001000000 : "rootfs"
FEPHY:addr=1, la_am=0xb, ldo_am=0x4, r_tuning=0x20
libphy: hisi_femac_mii_bus: probed
libphy: Fixed MDIO Bus: probed
Generic PHY 10041100.mdio:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=10041100.mdio:01, irq=-1)
phy_id=0x20669903, phy_mode=mii
hisi-femac 10040000.ethernet: using random MAC address fa:98:f8:c2:ca:17
usbcore: registered new interface driver zd1201
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe6c hci version 0x110 quirks 0x20010010
xhci-hcd xhci-hcd.0.auto: irq 52, io mem 0x10030000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: hub can't support USB3.0
i2c /dev entries driver
hibvt-i2c 12060000.i2c: hibvt-i2c0@100000hz registered
hibvt-i2c 12061000.i2c: hibvt-i2c1@100000hz registered
hibvt-i2c 12062000.i2c: hibvt-i2c2@100000hz registered
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on 10010000.sdhci [10010000.sdhci] using ADMA in legacy mode
mmc1: SDHCI controller on 10020000.sdhci [10020000.sdhci] using ADMA in legacy mode
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Key type dns_resolver registered
VFS: Mounted root (jffs2 filesystem) on device 31:2.
devtmpfs: mounted
Freeing unused kernel memory: 164K (c0569000 - c0592000)
This architecture does not have kernel memory protection.
random: init: uninitialized urandom read (4 bytes read)

_ _ _ _ _ _ _ _ _ _ _ _
\ _ _ _ _ _ ___
/ /__/ \ |_/
/ __ / - _ ___
/ / / / / /
_ _ _ / / / \/ \_ __
___\\___

[RCS]: /etc/init.d/S00devs
mknod: /dev/console: File exists
mknod: /dev/ttyAMA0: File exists
mknod: /dev/ttyAMA1: File exists
mknod: /dev/null: File exists
[RCS]: /etc/init.d/S01udev
udevd[551]: starting eudev-3.2.7
udevd[551]: inotify_init failed: Function not implemented
udevd[551]: error initializing inotify
[RCS]: /etc/init.d/S60ansjeripc
[RCS]: /etc/init.d/S80network
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x120b3400: 0x00000080 --> 0x00000080
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x120b3200: 0x00000000 --> 0x00000000
[END]
mount: mounting /dev/mtdblock3 on /config failed: No such file or directory
----Sensor Type: f23 ----

Initalizing available sources

* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmrandom: crng init done
dshell.c:168}cmdstr:himm
0x100c000c: 0x00001000 --> 0x00001000
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x100c0010: 0x00001000 --> 0x00001000
[END]

Please press Enter to activate this console. * Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x112c0058: 0x00001170 --> 0x00001000
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x112c005c: 0x00001170 --> 0x00001000
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x112c0070: 0sys_config: loading out-of-tree module taints kernel.
x00001000 --> 0x00001000
[END]clock=3

*** Board tools : ver0.0.1_201==== online_flag=0, cmos_yuv_flag=0, sensor=f23, chip=hi3516ev300, board=demo====
21120 ***
[debug]: {source/uti==== g_quick_start_flag=0 ====
ls/cmdshell.c:168}cmdstr:himm
0sysconfig init success!
x112c0074: 0x00001000 --> 0x00001000
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x112c001c: 0x00001000 --> 0x00001A02
[END]
sh: 50M: bad number
mmz_start: 0x4320Module himedia: init ok
0000, mmz_size: 78M
Hisilicon Media Memory Zone Manager
hi_osal 1.0 init success!
hi3516ev200_base: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
load sys.ko for Hi3516EV200...OK!
load tde.ko for HI3516EV200...OK!
load region.ko for Hi3516EV200...OK!
load vgs.ko for Hi3516EV200...OK!
load vi.ko for Hi3516EV200...OK !
ISP Mod init!
load vpss.ko for Hi3516EV200...OK!
load chnl.ko for Hi3516EV200...OK!
load vedu.ko for Hi3516EV200...OK!
load rc.ko for Hi3516EV200...OK!
load venc.ko for Hi3516EV200...OK!
load h264e.ko for Hi3516EV200...OK!
load h265e.ko for Hi3516EV200...OK!
load jpege.ko for Hi3516EV200...OK!
load ive.ko for Hi3516EV200...OK!
register dev
Hisilicon Watchdog Timer: 0.01 initialized. default_margin=60 sec (nodeamon= 0)
hiwtdg init ok. ver=Oct 18 2019, 18:21:00.
gpio_0_base_addr_virtual:0xc4380000 !
gpio_0_base_addr_virtual:0xc43a0000 !
RTW: module init start
RTW: rtl88x2cu v5.9.0.4_36631.20200423_COEX20200103-1717
RTW: build time: Nov 24 2020 02:48:55
RTW: rtl88x2cu BT-Coex version = COEX20200103-1717
usbcore: registered new interface driver rtl88x2cu
RTW: module init ret=0
insert audio
load mipi_rx driver successful!
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x120b1400: 0x00000001 --> 0x00000001
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x120b1004: 0x00000001 --> 0x00000000
[END]
./start.sh: line 41: ./NewIPCam.exe: not found
############### /app/bin/applauncher
++++++++++ thread create! [applauncher][-1230240576]
++++++++++ thread create! [applauncher][-1229192000]
++++++++++ thread create! [applauncher][-1228143424]

------ Message Queues --------
key msqid owner perms used-bytes messages
0x6702008b 0 root 666 0 0

before close, disable failed!
The Watchdog timeout is 30 seconds
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
start reboot !!
umount: /dev/shm/ busy - remounted read-only
umount: devtmpfs busy - remounted read-only
umount: can't remount /dev/root read-only
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system reboot
reboot: Restarting system



System startup

Uncompress Ok!

U-Boot 2016.11-g7155f55-dirty (Jul 28 2021 - 20:05:33 +0800)hi3516ev300

Relocation Offset is: 07730000
Relocating to 47f30000, new gd at 47ecfef0, sp at 47ecfed0
SPI Nor: hifmc_ip_ver_check(44): Check Flash Memory Controller v100 ...hifmc_ip_ver_check(50): Found
hifmc_spi_nor_probe(1683): SPI Nor ID Table Version 1.0
hifmc_spi_nor_probe(1708): SPI Nor(cs 0) ID: 0x1c 0x40 0x18
hifmc_spi_nor_probe(1773): Block:64KB hifmc_spi_nor_probe(1774): Chip:16MB hifmc_spi_nor_probe(1775): Name:"GM25Q128A"
hifmc100_spi_nor_probe(147): SPI Nor total size: 16MB
NAND: 0 MiB
MMC: Card did not respond to voltage select!
No SD device found !
hisi-sdhci: 0
In: serial
Out: serial
Err: serial
Net: eth0
Warning: eth0 (eth0) using random MAC address - 96:1c:cb:5a:48:33

Hit any key to stop autoboot: 0
device 0 offset 0x60000, size 0x240000

SF: 2359296 bytes @ 0x60000 Read: OK
## Booting kernel from Legacy Image at 42000000 ...
Image Name: Linux-4.9.37
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2198004 Bytes = 2.1 MiB
Load Address: 40008000
Entry Point: 40008000
Loading Kernel Image ... OK

Starting kernel ...

Booting Linux on physical CPU 0x0
Linux version 4.9.37 (root@ubuntu) (gcc version 6.3.0 (HC&C V100R002C00B032_20190114) ) #44 Mon Jul 26 14:48:55 CST 2021
CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d
CPU: div instructions available: patching division code
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
OF: fdt:Machine model: Hisilicon HI3516EV200 DEMO Board
Memory policy: Data cache writeback
CPU: All CPU(s) started in SVC mode.
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 12700
Kernel command line: mem=50M console=ttyAMA0,115200 root=/dev/mtdblock2 rootfstype=jffs2 rw mtdparts=hi_sfc:384K(boot),2304K(kernel),13696K(rootfs)
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 44568K/51200K available (4452K kernel code, 134K rwdata, 1044K rodata, 164K init, 222K bss, 6632K reserved, 0K cma-reserved)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xc3800000 - 0xff800000 ( 960 MB)
lowmem : 0xc0000000 - 0xc3200000 ( 50 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc0461470 (4454 kB)
.init : 0xc0569000 - 0xc0592000 ( 164 kB)
.data : 0xc0592000 - 0xc05b3a60 ( 135 kB)
.bss : 0xc05b5000 - 0xc05ec838 ( 223 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:16 nr_irqs:16 16
Gic dist init...
arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
Switching to timer-based delay loop, resolution 20ns
clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=500000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x40008200 - 0x40008258
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 256 (order: -1, 3072 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
Serial: AMBA PL011 UART driver
12040000.uart: ttyAMA0 at MMIO 0x12040000 (irq = 20, base_baud = 0) is a PL011 rev2
console [ttyAMA0] enabled
12041000.uart: ttyAMA1 at MMIO 0x12041000 (irq = 21, base_baud = 0) is a PL011 rev2
12042000.uart: ttyAMA2 at MMIO 0x12042000 (irq = 22, base_baud = 0) is a PL011 rev2
ssp-pl022 12070000.spi: ARM PL022 driver, device ID: 0x00800022
ssp-pl022 12070000.spi: mapped registers from 0x12070000 to c386f000
ssp-pl022 12071000.spi: ARM PL022 driver, device ID: 0x00800022
ssp-pl022 12071000.spi: mapped registers from 0x12071000 to c3873000
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
workingset: timestamp_bits=30 max_order=14 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
jffs2: version 2.2 (NAND) (ZLIB) (RTIME) (c) 2001-2006 Red Hat, Inc.
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
brd: module loaded
hisi-sfc hisi_spi_nor.0: SPI Nor ID Table Version 1.2
hisi-sfc hisi_spi_nor.0: all blocks is unlocked.
hisi-sfc hisi_spi_nor.0: gm25q128a (Chipsize 16 Mbytes, Blocksize 64KiB)
3 cmdlinepart partitions found on MTD device hi_sfc
3 cmdlinepart partitions found on MTD device hi_sfc
Creating 3 MTD partitions on "hi_sfc":
0x000000000000-0x000000060000 : "boot"
0x000000060000-0x0000002a0000 : "kernel"
0x0000002a0000-0x000001000000 : "rootfs"
FEPHY:addr=1, la_am=0xb, ldo_am=0x4, r_tuning=0x20
libphy: hisi_femac_mii_bus: probed
libphy: Fixed MDIO Bus: probed
Generic PHY 10041100.mdio:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=10041100.mdio:01, irq=-1)
phy_id=0x20669903, phy_mode=mii
hisi-femac 10040000.ethernet: using random MAC address be:f3:00:3c:a8:af
usbcore: registered new interface driver zd1201
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe6c hci version 0x110 quirks 0x20010010
xhci-hcd xhci-hcd.0.auto: irq 52, io mem 0x10030000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: hub can't support USB3.0
i2c /dev entries driver
hibvt-i2c 12060000.i2c: hibvt-i2c0@100000hz registered
hibvt-i2c 12061000.i2c: hibvt-i2c1@100000hz registered
hibvt-i2c 12062000.i2c: hibvt-i2c2@100000hz registered
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on 10010000.sdhci [10010000.sdhci] using ADMA in legacy mode
mmc1: SDHCI controller on 10020000.sdhci [10020000.sdhci] using ADMA in legacy mode
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Key type dns_resolver registered
VFS: Mounted root (jffs2 filesystem) on device 31:2.
devtmpfs: mounted
Freeing unused kernel memory: 164K (c0569000 - c0592000)
This architecture does not have kernel memory protection.
random: init: uninitialized urandom read (4 bytes read)

_ _ _ _ _ _ _ _ _ _ _ _
\ _ _ _ _ _ ___
/ /__/ \ |_/
/ __ / - _ ___
/ / / / / /
_ _ _ / / / \/ \_ __
___\\___

[RCS]: /etc/init.d/S00devs
mknod: /dev/console: File exists
mknod: /dev/ttyAMA0: File exists
mknod: /dev/ttyAMA1: File exists
mknod: /dev/null: File exists
[RCS]: /etc/init.d/S01udev
udevd[551]: starting eudev-3.2.7
udevd[551]: inotify_init failed: Function not implemented
udevd[551]: error initializing inotify
[RCS]: /etc/init.d/S60ansjeripc
[RCS]: /etc/init.d/S80network
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x120b3400: 0x00000080 --> 0x00000080
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x120b3200: 0x00000000 --> 0x00000000
[END]
mount: mounting /dev/mtdblock3 on /config failed: No such file or directory
----Sensor Type: f23 ----

Initalizing available sources

* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x100c000c: 0x00001000 --> 0x00001000
[END]
random: crng init done.0.1_20121120 ***

[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x100c0010: 0x00001000 --> 0x00001000
[END]

Please press Enter to activate this console. * Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x112c0058: 0x00001170 --> 0x00001000
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x112c005c: 0x00001170 --> 0x00001000
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x112c0070: 0x00001000 --> 0x00001000
sys_config: loading out-of-tree module taints kernel.
[END]
*** Board tools : ver0.0.clock=3
1_20121120 ***
[debug]: {sourc==== online_flag=0, cmos_yuv_flag=0, sensor=f23, chip=hi3516ev300, board=demo====
e/utils/cmdshell.c:168}cmdstr:hi==== g_quick_start_flag=0 ====
mm
0x112c0074: 0x00001000 --> 0sysconfig init success!
x00001000
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x112c001c: 0x00001000 --> 0x00001A02
[END]
sh: 50M: bad number
mmz_start: 0x43200000, mmz_size: 78M
Module himedia: init ok
Hisilicon Media Memory Zone Manager
hi_osal 1.0 init success!
hi3516ev200_base: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
load sys.ko for Hi3516EV200...OK!
load tde.ko for HI3516EV200...OK!
load region.ko for Hi3516EV200...OK!
load vgs.ko for Hi3516EV200...OK!
load vi.ko for Hi3516EV200...OK !
ISP Mod init!
load vpss.ko for Hi3516EV200...OK!
load chnl.ko for Hi3516EV200...OK!
load vedu.ko for Hi3516EV200...OK!
load rc.ko for Hi3516EV200...OK!
load venc.ko for Hi3516EV200...OK!
load h264e.ko for Hi3516EV200...OK!
load h265e.ko for Hi3516EV200...OK!
load jpege.ko for Hi3516EV200...OK!
load ive.ko for Hi3516EV200...OK!
register dev
Hisilicon Watchdog Timer: 0.01 initialized. default_margin=60 sec (nodeamon= 0)
hiwtdg init ok. ver=Oct 18 2019, 18:21:00.
gpio_0_base_addr_virtual:0xc4380000 !
gpio_0_base_addr_virtual:0xc43a0000 !
RTW: module init start
RTW: rtl88x2cu v5.9.0.4_36631.20200423_COEX20200103-1717
RTW: build time: Nov 24 2020 02:48:55
RTW: rtl88x2cu BT-Coex version = COEX20200103-1717
usbcore: registered new interface driver rtl88x2cu
RTW: module init ret=0
insert audio
load mipi_rx driver successful!
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x120b1400: 0x00000001 --> 0x00000001
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x120b1004: 0x00000001 --> 0x00000000
[END]
./start.sh: line 41: ./NewIPCam.exe: not found
############### /app/bin/applauncher
++++++++++ thread create! [applauncher][-1229646656]
++++++++++ thread create! [applauncher][-1228598080]
++++++++++ thread create! [applauncher][-1227549504]

------ Message Queues --------
key msqid owner perms used-bytes messages
0x6702008b 0 root 666 0 0

before close, disable failed!
The Watchdog timeout is 30 seconds
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
start reboot !!
umount: /dev/shm/ busy - remounted read-only
umount: devtmpfs busy - remounted read-only
umount: can't remount /dev/root read-only
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system reboot
reboot: Restarting system



System startup

Uncompress Ok!

U-Boot 2016.11-g7155f55-dirty (Jul 28 2021 - 20:05:33 +0800)hi3516ev300

Relocation Offset is: 07730000
Relocating to 47f30000, new gd at 47ecfef0, sp at 47ecfed0
SPI Nor: hifmc_ip_ver_check(44): Check Flash Memory Controller v100 ...hifmc_ip_ver_check(50): Found
hifmc_spi_nor_probe(1683): SPI Nor ID Table Version 1.0
hifmc_spi_nor_probe(1708): SPI Nor(cs 0) ID: 0x1c 0x40 0x18
hifmc_spi_nor_probe(1773): Block:64KB hifmc_spi_nor_probe(1774): Chip:16MB hifmc_spi_nor_probe(1775): Name:"GM25Q128A"
hifmc100_spi_nor_probe(147): SPI Nor total size: 16MB
NAND: 0 MiB
MMC: Card did not respond to voltage select!
No SD device found !
hisi-sdhci: 0
In: serial
Out: serial
Err: serial
Net: eth0
Warning: eth0 (eth0) using random MAC address - 96:1c:cb:5a:48:33

Hit any key to stop autoboot: 0
device 0 offset 0x60000, size 0x240000

SF: 2359296 bytes @ 0x60000 Read: OK
## Booting kernel from Legacy Image at 42000000 ...
Image Name: Linux-4.9.37
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2198004 Bytes = 2.1 MiB
Load Address: 40008000
Entry Point: 40008000
Loading Kernel Image ... OK

Starting kernel ...

Booting Linux on physical CPU 0x0
Linux version 4.9.37 (root@ubuntu) (gcc version 6.3.0 (HC&C V100R002C00B032_20190114) ) #44 Mon Jul 26 14:48:55 CST 2021
CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d
CPU: div instructions available: patching division code
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
OF: fdt:Machine model: Hisilicon HI3516EV200 DEMO Board
Memory policy: Data cache writeback
CPU: All CPU(s) started in SVC mode.
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 12700
Kernel command line: mem=50M console=ttyAMA0,115200 root=/dev/mtdblock2 rootfstype=jffs2 rw mtdparts=hi_sfc:384K(boot),2304K(kernel),13696K(rootfs)
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 44568K/51200K available (4452K kernel code, 134K rwdata, 1044K rodata, 164K init, 222K bss, 6632K reserved, 0K cma-reserved)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xc3800000 - 0xff800000 ( 960 MB)
lowmem : 0xc0000000 - 0xc3200000 ( 50 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc0461470 (4454 kB)
.init : 0xc0569000 - 0xc0592000 ( 164 kB)
.data : 0xc0592000 - 0xc05b3a60 ( 135 kB)
.bss : 0xc05b5000 - 0xc05ec838 ( 223 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:16 nr_irqs:16 16
Gic dist init...
arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
Switching to timer-based delay loop, resolution 20ns
clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=500000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x40008200 - 0x40008258
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 256 (order: -1, 3072 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
Serial: AMBA PL011 UART driver
12040000.uart: ttyAMA0 at MMIO 0x12040000 (irq = 20, base_baud = 0) is a PL011 rev2
console [ttyAMA0] enabled
12041000.uart: ttyAMA1 at MMIO 0x12041000 (irq = 21, base_baud = 0) is a PL011 rev2
12042000.uart: ttyAMA2 at MMIO 0x12042000 (irq = 22, base_baud = 0) is a PL011 rev2
ssp-pl022 12070000.spi: ARM PL022 driver, device ID: 0x00800022
ssp-pl022 12070000.spi: mapped registers from 0x12070000 to c386f000
ssp-pl022 12071000.spi: ARM PL022 driver, device ID: 0x00800022
ssp-pl022 12071000.spi: mapped registers from 0x12071000 to c3873000
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
workingset: timestamp_bits=30 max_order=14 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
jffs2: version 2.2 (NAND) (ZLIB) (RTIME) (c) 2001-2006 Red Hat, Inc.
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
brd: module loaded
hisi-sfc hisi_spi_nor.0: SPI Nor ID Table Version 1.2
hisi-sfc hisi_spi_nor.0: all blocks is unlocked.
hisi-sfc hisi_spi_nor.0: gm25q128a (Chipsize 16 Mbytes, Blocksize 64KiB)
3 cmdlinepart partitions found on MTD device hi_sfc
3 cmdlinepart partitions found on MTD device hi_sfc
Creating 3 MTD partitions on "hi_sfc":
0x000000000000-0x000000060000 : "boot"
0x000000060000-0x0000002a0000 : "kernel"
0x0000002a0000-0x000001000000 : "rootfs"
FEPHY:addr=1, la_am=0xb, ldo_am=0x4, r_tuning=0x20
libphy: hisi_femac_mii_bus: probed
libphy: Fixed MDIO Bus: probed
Generic PHY 10041100.mdio:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=10041100.mdio:01, irq=-1)
phy_id=0x20669903, phy_mode=mii
hisi-femac 10040000.ethernet: using random MAC address 8a:34:57:50:ed:e9
usbcore: registered new interface driver zd1201
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe6c hci version 0x110 quirks 0x20010010
xhci-hcd xhci-hcd.0.auto: irq 52, io mem 0x10030000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: hub can't support USB3.0
i2c /dev entries driver
hibvt-i2c 12060000.i2c: hibvt-i2c0@100000hz registered
hibvt-i2c 12061000.i2c: hibvt-i2c1@100000hz registered
hibvt-i2c 12062000.i2c: hibvt-i2c2@100000hz registered
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on 10010000.sdhci [10010000.sdhci] using ADMA in legacy mode
mmc1: SDHCI controller on 10020000.sdhci [10020000.sdhci] using ADMA in legacy mode
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Key type dns_resolver registered
VFS: Mounted root (jffs2 filesystem) on device 31:2.
devtmpfs: mounted
Freeing unused kernel memory: 164K (c0569000 - c0592000)
This architecture does not have kernel memory protection.
random: init: uninitialized urandom read (4 bytes read)

_ _ _ _ _ _ _ _ _ _ _ _
\ _ _ _ _ _ ___
/ /__/ \ |_/
/ __ / - _ ___
/ / / / / /
_ _ _ / / / \/ \_ __
___\\___

[RCS]: /etc/init.d/S00devs
mknod: /dev/console: File exists
mknod: /dev/ttyAMA0: File exists
mknod: /dev/ttyAMA1: File exists
mknod: /dev/null: File exists
[RCS]: /etc/init.d/S01udev
udevd[551]: starting eudev-3.2.7
udevd[551]: inotify_init failed: Function not implemented
udevd[551]: error initializing inotify
[RCS]: /etc/init.d/S60ansjeripc
[RCS]: /etc/init.d/S80network
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x120b3400: 0x00000080 --> 0x00000080
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x120b3200: 0x00000000 --> 0x00000000
[END]
mount: mounting /dev/mtdblock3 on /config failed: No such file or directory
----Sensor Type: f23 ----

Initalizing available sources

* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x100c000c: 0x00001000 --> 0x00001000
[END]
* Board tools : ver0.0.1_20121120 * random: crng init done

[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x100c0010: 0x00001000 --> 0x00001000
[END]

Please press Enter to activate this console. * Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x112c0058: 0x00001170 --> 0x00001000
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x112c005c: 0x00001170 --> 0x00001000
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
sys_config: loading out-of-tree module taints kernel.

[END]
*** Board tools : ver0.0clock=3
.1_20121120 ***
[debug]: {sour==== online_flag=0, cmos_yuv_flag=0, sensor=f23, chip=hi3516ev300, board=demo====
ce/utils/cmdshell.c:168}cmdstr:h==== g_quick_start_flag=0 ====
imm
0x112c0074: 0x00001000 --> sysconfig init success!
0x00001000
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x112c001c: 0x00001000 --> 0x00001A02
[END]
sh: 50M: bad number
mmz_start: 0x43200000, mmz_size: 78M
Module himedia: init ok
Hisilicon Media Memory Zone Manager
hi_osal 1.0 init success!
hi3516ev200_base: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
load sys.ko for Hi3516EV200...OK!
load tde.ko for HI3516EV200...OK!
load region.ko for Hi3516EV200...OK!
load vgs.ko for Hi3516EV200...OK!
load vi.ko for Hi3516EV200...OK !
ISP Mod init!
load vpss.ko for Hi3516EV200...OK!
load chnl.ko for Hi3516EV200...OK!
load vedu.ko for Hi3516EV200...OK!
load rc.ko for Hi3516EV200...OK!
load venc.ko for Hi3516EV200...OK!
load h264e.ko for Hi3516EV200...OK!
load h265e.ko for Hi3516EV200...OK!
load jpege.ko for Hi3516EV200...OK!
load ive.ko for Hi3516EV200...OK!
register dev
Hisilicon Watchdog Timer: 0.01 initialized. default_margin=60 sec (nodeamon= 0)
hiwtdg init ok. ver=Oct 18 2019, 18:21:00.
gpio_0_base_addr_virtual:0xc4380000 !
gpio_0_base_addr_virtual:0xc43a0000 !
RTW: module init start
RTW: rtl88x2cu v5.9.0.4_36631.20200423_COEX20200103-1717
RTW: build time: Nov 24 2020 02:48:55
RTW: rtl88x2cu BT-Coex version = COEX20200103-1717
usbcore: registered new interface driver rtl88x2cu
RTW: module init ret=0
insert audio
load mipi_rx driver successful!
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x120b1400: 0x00000001 --> 0x00000001
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x120b1004: 0x00000001 --> 0x00000000
[END]
./start.sh: line 41: ./NewIPCam.exe: not found
############### /app/bin/applauncher
++++++++++ thread create! [applauncher][-1230179136]
++++++++++ thread create! [applauncher][-1229130560]
++++++++++ thread create! [applauncher][-1228081984]

------ Message Queues --------
key msqid owner perms used-bytes messages
0x6702008b 0 root 666 0 0

before close, disable failed!
The Watchdog timeout is 30 seconds
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
start reboot !!
umount: /dev/shm/ busy - remounted read-only
umount: devtmpfs busy - remounted read-only
umount: can't remount /dev/root read-only
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system reboot
reboot: Restarting system



System startup

Uncompress Ok!

U-Boot 2016.11-g7155f55-dirty (Jul 28 2021 - 20:05:33 +0800)hi3516ev300

Relocation Offset is: 07730000
Relocating to 47f30000, new gd at 47ecfef0, sp at 47ecfed0
SPI Nor: hifmc_ip_ver_check(44): Check Flash Memory Controller v100 ...hifmc_ip_ver_check(50): Found
hifmc_spi_nor_probe(1683): SPI Nor ID Table Version 1.0
hifmc_spi_nor_probe(1708): SPI Nor(cs 0) ID: 0x1c 0x40 0x18
hifmc_spi_nor_probe(1773): Block:64KB hifmc_spi_nor_probe(1774): Chip:16MB hifmc_spi_nor_probe(1775): Name:"GM25Q128A"
hifmc100_spi_nor_probe(147): SPI Nor total size: 16MB
NAND: 0 MiB
MMC: Card did not respond to voltage select!
No SD device found !
hisi-sdhci: 0
In: serial
Out: serial
Err: serial
Net: eth0
Warning: eth0 (eth0) using random MAC address - 96:1c:cb:5a:48:33

Hit any key to stop autoboot: 0
device 0 offset 0x60000, size 0x240000

SF: 2359296 bytes @ 0x60000 Read: OK
## Booting kernel from Legacy Image at 42000000 ...
Image Name: Linux-4.9.37
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2198004 Bytes = 2.1 MiB
Load Address: 40008000
Entry Point: 40008000
Loading Kernel Image ... OK

Starting kernel ...

Booting Linux on physical CPU 0x0
Linux version 4.9.37 (root@ubuntu) (gcc version 6.3.0 (HC&C V100R002C00B032_20190114) ) #44 Mon Jul 26 14:48:55 CST 2021
CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d
CPU: div instructions available: patching division code
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
OF: fdt:Machine model: Hisilicon HI3516EV200 DEMO Board
Memory policy: Data cache writeback
CPU: All CPU(s) started in SVC mode.
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 12700
Kernel command line: mem=50M console=ttyAMA0,115200 root=/dev/mtdblock2 rootfstype=jffs2 rw mtdparts=hi_sfc:384K(boot),2304K(kernel),13696K(rootfs)
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 44568K/51200K available (4452K kernel code, 134K rwdata, 1044K rodata, 164K init, 222K bss, 6632K reserved, 0K cma-reserved)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xc3800000 - 0xff800000 ( 960 MB)
lowmem : 0xc0000000 - 0xc3200000 ( 50 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc0461470 (4454 kB)
.init : 0xc0569000 - 0xc0592000 ( 164 kB)
.data : 0xc0592000 - 0xc05b3a60 ( 135 kB)
.bss : 0xc05b5000 - 0xc05ec838 ( 223 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:16 nr_irqs:16 16
Gic dist init...
arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
Switching to timer-based delay loop, resolution 20ns
clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=500000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x40008200 - 0x40008258
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 256 (order: -1, 3072 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
Serial: AMBA PL011 UART driver
12040000.uart: ttyAMA0 at MMIO 0x12040000 (irq = 20, base_baud = 0) is a PL011 rev2
console [ttyAMA0] enabled
12041000.uart: ttyAMA1 at MMIO 0x12041000 (irq = 21, base_baud = 0) is a PL011 rev2
12042000.uart: ttyAMA2 at MMIO 0x12042000 (irq = 22, base_baud = 0) is a PL011 rev2
ssp-pl022 12070000.spi: ARM PL022 driver, device ID: 0x00800022
ssp-pl022 12070000.spi: mapped registers from 0x12070000 to c386f000
ssp-pl022 12071000.spi: ARM PL022 driver, device ID: 0x00800022
ssp-pl022 12071000.spi: mapped registers from 0x12071000 to c3873000
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
workingset: timestamp_bits=30 max_order=14 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
jffs2: version 2.2 (NAND) (ZLIB) (RTIME) (c) 2001-2006 Red Hat, Inc.
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
brd: module loaded
hisi-sfc hisi_spi_nor.0: SPI Nor ID Table Version 1.2
hisi-sfc hisi_spi_nor.0: all blocks is unlocked.
hisi-sfc hisi_spi_nor.0: gm25q128a (Chipsize 16 Mbytes, Blocksize 64KiB)
3 cmdlinepart partitions found on MTD device hi_sfc
3 cmdlinepart partitions found on MTD device hi_sfc
Creating 3 MTD partitions on "hi_sfc":
0x000000000000-0x000000060000 : "boot"
0x000000060000-0x0000002a0000 : "kernel"
0x0000002a0000-0x000001000000 : "rootfs"
FEPHY:addr=1, la_am=0xb, ldo_am=0x4, r_tuning=0x20
libphy: hisi_femac_mii_bus: probed
libphy: Fixed MDIO Bus: probed
Generic PHY 10041100.mdio:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=10041100.mdio:01, irq=-1)
phy_id=0x20669903, phy_mode=mii
hisi-femac 10040000.ethernet: using random MAC address f6:fd:b8:43:b8:58
usbcore: registered new interface driver zd1201
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe6c hci version 0x110 quirks 0x20010010
xhci-hcd xhci-hcd.0.auto: irq 52, io mem 0x10030000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: hub can't support USB3.0
i2c /dev entries driver
hibvt-i2c 12060000.i2c: hibvt-i2c0@100000hz registered
hibvt-i2c 12061000.i2c: hibvt-i2c1@100000hz registered
hibvt-i2c 12062000.i2c: hibvt-i2c2@100000hz registered
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on 10010000.sdhci [10010000.sdhci] using ADMA in legacy mode
mmc1: SDHCI controller on 10020000.sdhci [10020000.sdhci] using ADMA in legacy mode
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Key type dns_resolver registered
VFS: Mounted root (jffs2 filesystem) on device 31:2.
devtmpfs: mounted
Freeing unused kernel memory: 164K (c0569000 - c0592000)
This architecture does not have kernel memory protection.
random: init: uninitialized urandom read (4 bytes read)

_ _ _ _ _ _ _ _ _ _ _ _
\ _ _ _ _ _ ___
/ /__/ \ |_/
/ __ / - _ ___
/ / / / / /
_ _ _ / / / \/ \_ __
___\\___

[RCS]: /etc/init.d/S00devs
mknod: /dev/console: File exists
mknod: /dev/ttyAMA0: File exists
mknod: /dev/ttyAMA1: File exists
mknod: /dev/null: File exists
[RCS]: /etc/init.d/S01udev
udevd[551]: starting eudev-3.2.7
udevd[551]: inotify_init failed: Function not implemented
udevd[551]: error initializing inotify
[RCS]: /etc/init.d/S60ansjeripc
[RCS]: /etc/init.d/S80network
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x120b3400: 0x00000080 --> 0x00000080
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x120b3200: 0x00000000 --> 0x00000000
[END]
mount: mounting /dev/mtdblock3 on /config failed: No such file or directory
----Sensor Type: f23 ----

Initalizing available sources

* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x100c000c: 0x00001000 --> 0x00001000
[END]
* Board tools : ver0.0.1_20121120 * random: crng init done

[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x100c0010: 0x00001000 --> 0x00001000
[END]

Please press Enter to activate this console. * Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x112c0058: 0x00001170 --> 0x00001000
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x112c005c: 0x00001170 --> 0x00001000
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x112c0070: 0x00001000 --> 0x00001000
sys_config: loading out-of-tree module taints kernel.
[END]
*** Board tools : ver0.0.clock=3
1_20121120 ***
[debug]: {sourc==== online_flag=0, cmos_yuv_flag=0, sensor=f23, chip=hi3516ev300, board=demo====
e/utils/cmdshell.c:168}cmdstr:hi==== g_quick_start_flag=0 ====
mm
0x112c0074: 0x00001000 --> 0sysconfig init success!
x00001000
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x112c001c: 0x00001000 --> 0x00001A02
[END]
sh: 50M: bad number
mmz_start: 0x43200000, mmz_size: 78M
Module himedia: init ok
Hisilicon Media Memory Zone Manager
hi_osal 1.0 init success!
hi3516ev200_base: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
load sys.ko for Hi3516EV200...OK!
load tde.ko for HI3516EV200...OK!
load region.ko for Hi3516EV200...OK!
load vgs.ko for Hi3516EV200...OK!
load vi.ko for Hi3516EV200...OK !
ISP Mod init!
load vpss.ko for Hi3516EV200...OK!
load chnl.ko for Hi3516EV200...OK!
load vedu.ko for Hi3516EV200...OK!
load rc.ko for Hi3516EV200...OK!
load venc.ko for Hi3516EV200...OK!
load h264e.ko for Hi3516EV200...OK!
load h265e.ko for Hi3516EV200...OK!
load jpege.ko for Hi3516EV200...OK!
load ive.ko for Hi3516EV200...OK!
register dev
Hisilicon Watchdog Timer: 0.01 initialized. default_margin=60 sec (nodeamon= 0)
hiwtdg init ok. ver=Oct 18 2019, 18:21:00.
gpio_0_base_addr_virtual:0xc4380000 !
gpio_0_base_addr_virtual:0xc43a0000 !
RTW: module init start
RTW: rtl88x2cu v5.9.0.4_36631.20200423_COEX20200103-1717
RTW: build time: Nov 24 2020 02:48:55
RTW: rtl88x2cu BT-Coex version = COEX20200103-1717
usbcore: registered new interface driver rtl88x2cu
RTW: module init ret=0
insert audio
load mipi_rx driver successful!
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x120b1400: 0x00000001 --> 0x00000001
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x120b1004: 0x00000001 --> 0x00000000
[END]
./start.sh: line 41: ./NewIPCam.exe: not found
############### /app/bin/applauncher
++++++++++ thread create! [applauncher][-1229474624]
++++++++++ thread create! [applauncher][-1228426048]
++++++++++ thread create! [applauncher][-1227377472]

------ Message Queues --------
key msqid owner perms used-bytes messages
0x6702008b 0 root 666 0 0

before close, disable failed!
The Watchdog timeout is 30 seconds
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
start reboot !!
umount: /dev/shm/ busy - remounted read-only
umount: devtmpfs busy - remounted read-only
umount: can't remount /dev/root read-only
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system reboot
reboot: Restarting system



System startup

Uncompress Ok!

U-Boot 2016.11-g7155f55-dirty (Jul 28 2021 - 20:05:33 +0800)hi3516ev300

Relocation Offset is: 07730000
Relocating to 47f30000, new gd at 47ecfef0, sp at 47ecfed0
SPI Nor: hifmc_ip_ver_check(44): Check Flash Memory Controller v100 ...hifmc_ip_ver_check(50): Found
hifmc_spi_nor_probe(1683): SPI Nor ID Table Version 1.0
hifmc_spi_nor_probe(1708): SPI Nor(cs 0) ID: 0x1c 0x40 0x18
hifmc_spi_nor_probe(1773): Block:64KB hifmc_spi_nor_probe(1774): Chip:16MB hifmc_spi_nor_probe(1775): Name:"GM25Q128A"
hifmc100_spi_nor_probe(147): SPI Nor total size: 16MB
NAND: 0 MiB
MMC: Card did not respond to voltage select!
No SD device found !
hisi-sdhci: 0
In: serial
Out: serial
Err: serial
Net: eth0
Warning: eth0 (eth0) using random MAC address - 96:1c:cb:5a:48:33

Hit any key to stop autoboot: 0
device 0 offset 0x60000, size 0x240000

SF: 2359296 bytes @ 0x60000 Read: OK
## Booting kernel from Legacy Image at 42000000 ...
Image Name: Linux-4.9.37
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2198004 Bytes = 2.1 MiB
Load Address: 40008000
Entry Point: 40008000
Loading Kernel Image ... OK

Starting kernel ...

Booting Linux on physical CPU 0x0
Linux version 4.9.37 (root@ubuntu) (gcc version 6.3.0 (HC&C V100R002C00B032_20190114) ) #44 Mon Jul 26 14:48:55 CST 2021
CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d
CPU: div instructions available: patching division code
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
OF: fdt:Machine model: Hisilicon HI3516EV200 DEMO Board
Memory policy: Data cache writeback
CPU: All CPU(s) started in SVC mode.
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 12700
Kernel command line: mem=50M console=ttyAMA0,115200 root=/dev/mtdblock2 rootfstype=jffs2 rw mtdparts=hi_sfc:384K(boot),2304K(kernel),13696K(rootfs)
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 44568K/51200K available (4452K kernel code, 134K rwdata, 1044K rodata, 164K init, 222K bss, 6632K reserved, 0K cma-reserved)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xc3800000 - 0xff800000 ( 960 MB)
lowmem : 0xc0000000 - 0xc3200000 ( 50 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc0461470 (4454 kB)
.init : 0xc0569000 - 0xc0592000 ( 164 kB)
.data : 0xc0592000 - 0xc05b3a60 ( 135 kB)
.bss : 0xc05b5000 - 0xc05ec838 ( 223 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:16 nr_irqs:16 16
Gic dist init...
arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
Switching to timer-based delay loop, resolution 20ns
clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=500000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x40008200 - 0x40008258
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 256 (order: -1, 3072 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
Serial: AMBA PL011 UART driver
12040000.uart: ttyAMA0 at MMIO 0x12040000 (irq = 20, base_baud = 0) is a PL011 rev2
console [ttyAMA0] enabled
12041000.uart: ttyAMA1 at MMIO 0x12041000 (irq = 21, base_baud = 0) is a PL011 rev2
12042000.uart: ttyAMA2 at MMIO 0x12042000 (irq = 22, base_baud = 0) is a PL011 rev2
ssp-pl022 12070000.spi: ARM PL022 driver, device ID: 0x00800022
ssp-pl022 12070000.spi: mapped registers from 0x12070000 to c386f000
ssp-pl022 12071000.spi: ARM PL022 driver, device ID: 0x00800022
ssp-pl022 12071000.spi: mapped registers from 0x12071000 to c3873000
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
workingset: timestamp_bits=30 max_order=14 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
jffs2: version 2.2 (NAND) (ZLIB) (RTIME) (c) 2001-2006 Red Hat, Inc.
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
brd: module loaded
hisi-sfc hisi_spi_nor.0: SPI Nor ID Table Version 1.2
hisi-sfc hisi_spi_nor.0: all blocks is unlocked.
hisi-sfc hisi_spi_nor.0: gm25q128a (Chipsize 16 Mbytes, Blocksize 64KiB)
3 cmdlinepart partitions found on MTD device hi_sfc
3 cmdlinepart partitions found on MTD device hi_sfc
Creating 3 MTD partitions on "hi_sfc":
0x000000000000-0x000000060000 : "boot"
0x000000060000-0x0000002a0000 : "kernel"
0x0000002a0000-0x000001000000 : "rootfs"
FEPHY:addr=1, la_am=0xb, ldo_am=0x4, r_tuning=0x20
libphy: hisi_femac_mii_bus: probed
libphy: Fixed MDIO Bus: probed
Generic PHY 10041100.mdio:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=10041100.mdio:01, irq=-1)
phy_id=0x20669903, phy_mode=mii
hisi-femac 10040000.ethernet: using random MAC address e2:00:57:07:1e:89
usbcore: registered new interface driver zd1201
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe6c hci version 0x110 quirks 0x20010010
xhci-hcd xhci-hcd.0.auto: irq 52, io mem 0x10030000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: hub can't support USB3.0
i2c /dev entries driver
hibvt-i2c 12060000.i2c: hibvt-i2c0@100000hz registered
hibvt-i2c 12061000.i2c: hibvt-i2c1@100000hz registered
hibvt-i2c 12062000.i2c: hibvt-i2c2@100000hz registered
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on 10010000.sdhci [10010000.sdhci] using ADMA in legacy mode
mmc1: SDHCI controller on 10020000.sdhci [10020000.sdhci] using ADMA in legacy mode
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Key type dns_resolver registered
VFS: Mounted root (jffs2 filesystem) on device 31:2.
devtmpfs: mounted
Freeing unused kernel memory: 164K (c0569000 - c0592000)
This architecture does not have kernel memory protection.
random: init: uninitialized urandom read (4 bytes read)

_ _ _ _ _ _ _ _ _ _ _ _
\ _ _ _ _ _ ___
/ /__/ \ |_/
/ __ / - _ ___
/ / / / / /
_ _ _ / / / \/ \_ __
___\\___

[RCS]: /etc/init.d/S00devs
mknod: /dev/console: File exists
mknod: /dev/ttyAMA0: File exists
mknod: /dev/ttyAMA1: File exists
mknod: /dev/null: File exists
[RCS]: /etc/init.d/S01udev
udevd[551]: starting eudev-3.2.7
udevd[551]: inotify_init failed: Function not implemented
udevd[551]: error initializing inotify
[RCS]: /etc/init.d/S60ansjeripc
[RCS]: /etc/init.d/S80network
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x120b3400: 0x00000080 --> 0x00000080
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x120b3200: 0x00000000 --> 0x00000000
[END]
mount: mounting /dev/mtdblock3 on /config failed: No such file or directory
----Sensor Type: f23 ----

Initalizing available sources

* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x100c000c: 0x00001000 --> 0x00001000
[END]
* Board tools : ver0.0.1_20121120 *
random: crng init done
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x100c0010: 0x00001000 --> 0x00001000
[END]

Please press Enter to activate this console. * Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x112c0058: 0x00001170 --> 0x00001000
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x112c005c: 0x00001170 --> 0x00001000
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x112c0070: 0x00001000 --> 0x00001000
[Esys_config: loading out-of-tree module taints kernel.
ND]
*** Board tools : ver0.0.1_clock=3
20121120 ***
[debug]: {source/==== online_flag=0, cmos_yuv_flag=0, sensor=f23, chip=hi3516ev300, board=demo====
utils/cmdshell.c:168}cmdstr:himm==== g_quick_start_flag=0 ====

0x112c0074: 0x00001000 --> 0x0sysconfig init success!
0001000
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x112c001c: 0x00001000 --> 0x00001A02
[END]
sh: 50M: bad number
mmz_start: 0x43200000, mmz_size: 78M
Module himedia: init ok
Hisilicon Media Memory Zone Manager
hi_osal 1.0 init success!
hi3516ev200_base: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
load sys.ko for Hi3516EV200...OK!
load tde.ko for HI3516EV200...OK!
load region.ko for Hi3516EV200...OK!
load vgs.ko for Hi3516EV200...OK!
load vi.ko for Hi3516EV200...OK !
ISP Mod init!
load vpss.ko for Hi3516EV200...OK!
load chnl.ko for Hi3516EV200...OK!
load vedu.ko for Hi3516EV200...OK!
load rc.ko for Hi3516EV200...OK!
load venc.ko for Hi3516EV200...OK!
load h264e.ko for Hi3516EV200...OK!
load h265e.ko for Hi3516EV200...OK!
load jpege.ko for Hi3516EV200...OK!
load ive.ko for Hi3516EV200...OK!
register dev
Hisilicon Watchdog Timer: 0.01 initialized. default_margin=60 sec (nodeamon= 0)
hiwtdg init ok. ver=Oct 18 2019, 18:21:00.
gpio_0_base_addr_virtual:0xc4380000 !
gpio_0_base_addr_virtual:0xc43a0000 !
RTW: module init start
RTW: rtl88x2cu v5.9.0.4_36631.20200423_COEX20200103-1717
RTW: build time: Nov 24 2020 02:48:55
RTW: rtl88x2cu BT-Coex version = COEX20200103-1717
usbcore: registered new interface driver rtl88x2cu
RTW: module init ret=0
insert audio
load mipi_rx driver successful!
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x120b1400: 0x00000001 --> 0x00000001
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x120b1004: 0x00000001 --> 0x00000000
[END]
./start.sh: line 41: ./NewIPCam.exe: not found
############### /app/bin/applauncher
++++++++++ thread create! [applauncher][-1230285632]
++++++++++ thread create! [applauncher][-1229237056]
++++++++++ thread create! [applauncher][-1228188480]

------ Message Queues --------
key msqid owner perms used-bytes messages
0x6702008b 0 root 666 0 0

before close, disable failed!
The Watchdog timeout is 30 seconds
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
start reboot !!
umount: /dev/shm/ busy - remounted read-only
umount: devtmpfs busy - remounted read-only
umount: can't remount /dev/root read-only
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system reboot
reboot: Restarting system



System startup

Uncompress Ok!

U-Boot 2016.11-g7155f55-dirty (Jul 28 2021 - 20:05:33 +0800)hi3516ev300

Relocation Offset is: 07730000
Relocating to 47f30000, new gd at 47ecfef0, sp at 47ecfed0
SPI Nor: hifmc_ip_ver_check(44): Check Flash Memory Controller v100 ...hifmc_ip_ver_check(50): Found
hifmc_spi_nor_probe(1683): SPI Nor ID Table Version 1.0
hifmc_spi_nor_probe(1708): SPI Nor(cs 0) ID: 0x1c 0x40 0x18
hifmc_spi_nor_probe(1773): Block:64KB hifmc_spi_nor_probe(1774): Chip:16MB hifmc_spi_nor_probe(1775): Name:"GM25Q128A"
hifmc100_spi_nor_probe(147): SPI Nor total size: 16MB
NAND: 0 MiB
MMC: Card did not respond to voltage select!
No SD device found !
hisi-sdhci: 0
In: serial
Out: serial
Err: serial
Net: eth0
Warning: eth0 (eth0) using random MAC address - 96:1c:cb:5a:48:33

Hit any key to stop autoboot: 0
hisilicon # help<INTERRUPT>
hisilicon # <INTERRUPT>
hisilicon # <INTERRUPT>
hisilicon # <INTERRUPT>
hisilicon #



System startup

Uncompress Ok!

U-Boot 2016.11-g7155f55-dirty (Jul 28 2021 - 20:05:33 +0800)hi3516ev300

Relocation Offset is: 07730000
Relocating to 47f30000, new gd at 47ecfef0, sp at 47ecfed0
SPI Nor: hifmc_ip_ver_check(44): Check Flash Memory Controller v100 ...hifmc_ip_ver_check(50): Found
hifmc_spi_nor_probe(1683): SPI Nor ID Table Version 1.0
hifmc_spi_nor_probe(1708): SPI Nor(cs 0) ID: 0x1c 0x40 0x18
hifmc_spi_nor_probe(1773): Block:64KB hifmc_spi_nor_probe(1774): Chip:16MB hifmc_spi_nor_probe(1775): Name:"GM25Q128A"
hifmc100_spi_nor_probe(147): SPI Nor total size: 16MB
NAND: 0 MiB
MMC: Card did not respond to voltage select!
No SD device found !
hisi-sdhci: 0
In: serial
Out: serial
Err: serial
Net: eth0
Warning: eth0 (eth0) using random MAC address - 96:1c:cb:5a:48:33

Hit any key to stop autoboot: 0
hisilicon # <INTERRUPT>
hisilicon # <INTERRUPT>
hisilicon # dhcp
Hisilicon ETH net controler
MAC address invalid!
Set Random MAC address: d6:ef:4a:39:5f:b8
eth0 : phy status change : LINK=UP : DUPLEX=FULL : SPEED=100M
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
DHCP client bound to address 10.0.0.32 (3221 ms)
*** Warning: no boot file name; using '0A000020.img'
Using eth0 device
TFTP from server 10.0.0.1; our IP address is 10.0.0.32
Filename '0A000020.img'.
Load address: 0x40080000
Loading: T T T T T T T T T T
Retry count exceeded; starting again
hisilicon # <INTERRUPT>
hisilicon #



System startup

Uncompress Ok!

U-Boot 2016.11-g7155f55-dirty (Jul 28 2021 - 20:05:33 +0800)hi3516ev300

Relocation Offset is: 07730000
Relocating to 47f30000, new gd at 47ecfef0, sp at 47ecfed0
SPI Nor: hifmc_ip_ver_check(44): Check Flash Memory Controller v100 ...hifmc_ip_ver_check(50): Found
hifmc_spi_nor_probe(1683): SPI Nor ID Table Version 1.0
hifmc_spi_nor_probe(1708): SPI Nor(cs 0) ID: 0x1c 0x40 0x18
hifmc_spi_nor_probe(1773): Block:64KB hifmc_spi_nor_probe(1774): Chip:16MB hifmc_spi_nor_probe(1775): Name:"GM25Q128A"
hifmc100_spi_nor_probe(147): SPI Nor total size: 16MB
NAND: 0 MiB
MMC: Card did not respond to voltage select!
No SD device found !
hisi-sdhci: 0
In: serial
Out: serial
Err: serial
Net: eth0
Warning: eth0 (eth0) using random MAC address - 96:1c:cb:5a:48:33

Hit any key to stop autoboot: 0
device 0 offset 0x60000, size 0x240000

SF: 2359296 bytes @ 0x60000 Read: OK
## Booting kernel from Legacy Image at 42000000 ...
Image Name: Linux-4.9.37
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2198004 Bytes = 2.1 MiB
Load Address: 40008000
Entry Point: 40008000
Loading Kernel Image ... OK

Starting kernel ...

Booting Linux on physical CPU 0x0
Linux version 4.9.37 (root@ubuntu) (gcc version 6.3.0 (HC&C V100R002C00B032_20190114) ) #44 Mon Jul 26 14:48:55 CST 2021
CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d
CPU: div instructions available: patching division code
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
OF: fdt:Machine model: Hisilicon HI3516EV200 DEMO Board
Memory policy: Data cache writeback
CPU: All CPU(s) started in SVC mode.
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 12700
Kernel command line: mem=50M console=ttyAMA0,115200 root=/dev/mtdblock2 rootfstype=jffs2 rw mtdparts=hi_sfc:384K(boot),2304K(kernel),13696K(rootfs)
PID hash table entries: 256 (order: -2, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 44568K/51200K available (4452K kernel code, 134K rwdata, 1044K rodata, 164K init, 222K bss, 6632K reserved, 0K cma-reserved)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xc3800000 - 0xff800000 ( 960 MB)
lowmem : 0xc0000000 - 0xc3200000 ( 50 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0xc0008000 - 0xc0461470 (4454 kB)
.init : 0xc0569000 - 0xc0592000 ( 164 kB)
.data : 0xc0592000 - 0xc05b3a60 ( 135 kB)
.bss : 0xc05b5000 - 0xc05ec838 ( 223 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:16 nr_irqs:16 16
Gic dist init...
arm_arch_timer: Architected cp15 timer(s) running at 50.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
Switching to timer-based delay loop, resolution 20ns
clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=500000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x40008200 - 0x40008258
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
futex hash table entries: 256 (order: -1, 3072 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
Serial: AMBA PL011 UART driver
12040000.uart: ttyAMA0 at MMIO 0x12040000 (irq = 20, base_baud = 0) is a PL011 rev2
console [ttyAMA0] enabled
12041000.uart: ttyAMA1 at MMIO 0x12041000 (irq = 21, base_baud = 0) is a PL011 rev2
12042000.uart: ttyAMA2 at MMIO 0x12042000 (irq = 22, base_baud = 0) is a PL011 rev2
ssp-pl022 12070000.spi: ARM PL022 driver, device ID: 0x00800022
ssp-pl022 12070000.spi: mapped registers from 0x12070000 to c386f000
ssp-pl022 12071000.spi: ARM PL022 driver, device ID: 0x00800022
ssp-pl022 12071000.spi: mapped registers from 0x12071000 to c3873000
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource arch_sys_counter
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
workingset: timestamp_bits=30 max_order=14 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
jffs2: version 2.2 (NAND) (ZLIB) (RTIME) (c) 2001-2006 Red Hat, Inc.
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
brd: module loaded
hisi-sfc hisi_spi_nor.0: SPI Nor ID Table Version 1.2
hisi-sfc hisi_spi_nor.0: all blocks is unlocked.
hisi-sfc hisi_spi_nor.0: gm25q128a (Chipsize 16 Mbytes, Blocksize 64KiB)
3 cmdlinepart partitions found on MTD device hi_sfc
3 cmdlinepart partitions found on MTD device hi_sfc
Creating 3 MTD partitions on "hi_sfc":
0x000000000000-0x000000060000 : "boot"
0x000000060000-0x0000002a0000 : "kernel"
0x0000002a0000-0x000001000000 : "rootfs"
FEPHY:addr=1, la_am=0xb, ldo_am=0x4, r_tuning=0x20
libphy: hisi_femac_mii_bus: probed
libphy: Fixed MDIO Bus: probed
Generic PHY 10041100.mdio:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=10041100.mdio:01, irq=-1)
phy_id=0x20669903, phy_mode=mii
hisi-femac 10040000.ethernet: using random MAC address 26:be:ca:db:54:ea
usbcore: registered new interface driver zd1201
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe6c hci version 0x110 quirks 0x20010010
xhci-hcd xhci-hcd.0.auto: irq 52, io mem 0x10030000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: hub can't support USB3.0
i2c /dev entries driver
hibvt-i2c 12060000.i2c: hibvt-i2c0@100000hz registered
hibvt-i2c 12061000.i2c: hibvt-i2c1@100000hz registered
hibvt-i2c 12062000.i2c: hibvt-i2c2@100000hz registered
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on 10010000.sdhci [10010000.sdhci] using ADMA in legacy mode
mmc1: SDHCI controller on 10020000.sdhci [10020000.sdhci] using ADMA in legacy mode
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Key type dns_resolver registered
VFS: Mounted root (jffs2 filesystem) on device 31:2.
devtmpfs: mounted
Freeing unused kernel memory: 164K (c0569000 - c0592000)
This architecture does not have kernel memory protection.
random: init: uninitialized urandom read (4 bytes read)

_ _ _ _ _ _ _ _ _ _ _ _
\ _ _ _ _ _ ___
/ /__/ \ |_/
/ __ / - _ ___
/ / / / / /
_ _ _ / / / \/ \_ __
___\\___

[RCS]: /etc/init.d/S00devs
mknod: /dev/console: File exists
mknod: /dev/ttyAMA0: File exists
mknod: /dev/ttyAMA1: File exists
mknod: /dev/null: File exists
[RCS]: /etc/init.d/S01udev
udevd[551]: starting eudev-3.2.7
udevd[551]: inotify_init failed: Function not implemented
udevd[551]: error initializing inotify
[RCS]: /etc/init.d/S60ansjeripc
[RCS]: /etc/init.d/S80network
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x120b3400: 0x00000080 --> 0x00000080
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x120b3200: 0x00000000 --> 0x00000000
[END]
mount: mounting /dev/mtdblock3 on /config failed: No such file or directory
----Sensor Type: f23 ----

Initalizing available sources

* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x100c000c: 0x00001000 --> 0x00001000
[END]
* Board tools : ver0.0.1_20121120 * random: crng init done

[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x100c0010: 0x00001000 --> 0x00001000
[END]

Please press Enter to activate this console. * Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x112c0058: 0x00001170 --> 0x00001000
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x112c005c: 0x00001170 --> 0x00001000
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x112c0070: 0x00001000 --> 0x00001000
sys_config: loading out-of-tree module taints kernel.
[END]
*** Board tools : ver0.0.clock=3
1_20121120 ***
[debug]: {sourc==== online_flag=0, cmos_yuv_flag=0, sensor=f23, chip=hi3516ev300, board=demo====
e/utils/cmdshell.c:168}cmdstr:hi==== g_quick_start_flag=0 ====
mm
0x112c0074: 0x00001000 --> 0sysconfig init success!
x00001000
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x112c001c: 0x00001000 --> 0x00001A02
[END]
sh: 50M: bad number
mmz_start: 0x43200000, mmz_size: 78M
Module himedia: init ok
Hisilicon Media Memory Zone Manager
hi_osal 1.0 init success!
hi3516ev200_base: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
load sys.ko for Hi3516EV200...OK!
load tde.ko for HI3516EV200...OK!
load region.ko for Hi3516EV200...OK!
load vgs.ko for Hi3516EV200...OK!
load vi.ko for Hi3516EV200...OK !
ISP Mod init!
load vpss.ko for Hi3516EV200...OK!
load chnl.ko for Hi3516EV200...OK!
load vedu.ko for Hi3516EV200...OK!
load rc.ko for Hi3516EV200...OK!
load venc.ko for Hi3516EV200...OK!
load h264e.ko for Hi3516EV200...OK!
load h265e.ko for Hi3516EV200...OK!
load jpege.ko for Hi3516EV200...OK!
load ive.ko for Hi3516EV200...OK!
register dev
Hisilicon Watchdog Timer: 0.01 initialized. default_margin=60 sec (nodeamon= 0)
hiwtdg init ok. ver=Oct 18 2019, 18:21:00.
gpio_0_base_addr_virtual:0xc4380000 !
gpio_0_base_addr_virtual:0xc43a0000 !
RTW: module init start
RTW: rtl88x2cu v5.9.0.4_36631.20200423_COEX20200103-1717
RTW: build time: Nov 24 2020 02:48:55
RTW: rtl88x2cu BT-Coex version = COEX20200103-1717
usbcore: registered new interface driver rtl88x2cu
RTW: module init ret=0
insert audio
load mipi_rx driver successful!
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x120b1400: 0x00000001 --> 0x00000001
[END]
* Board tools : ver0.0.1_20121120 *
[debug]: {source/utils/cmdshell.c:168}cmdstr:himm
0x120b1004: 0x00000001 --> 0x00000000
[END]
./start.sh: line 41: ./NewIPCam.exe: not found
hisi-femac 10040000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
############### /app/bin/applauncher
++++++++++ thread create! [applauncher][-1230478144]
++++++++++ thread create! [applauncher][-1229429568]
++++++++++ thread create! [applauncher][-1228380992]

------ Message Queues --------
key msqid owner perms used-bytes messages
0x6702008b 0 root 666 0 0

before close, disable failed!
The Watchdog timeout is 30 seconds
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
__osal_unlocked_ioctl - Input param err,it is null!
start reboot !!
umount: /dev/shm/ busy - remounted read-only
umount: devtmpfs busy - remounted read-only
umount: can't remount /dev/root read-only
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system reboot
kreboot: Restarting system



System startup

Uncompress Ok!

U-Boot 2016.11-g7155f55-dirty (Jul 28 2021 - 20:05:33 +0800)hi3516ev300

Relocation Offset is: 07730000
Relocating to 47f30000, new gd at 47ecfef0, sp at 47ecfed0
SPI Nor: hifmc_ip_ver_check(44): Check Flash Memory Controller v100 ...hifmc_ip_ver_check(50): Found
hifmc_spi_nor_probe(1683): SPI Nor ID Table Version 1.0
hifmc_spi_nor_probe(1708): SPI Nor(cs 0) ID: 0x1c 0x40 0x18
hifmc_spi_nor_probe(1773): Block:64KB hifmc_spi_nor_probe(1774): Chip:16MB hifmc_spi_nor_probe(1775): Name:"GM25Q128A"
hifmc100_spi_nor_probe(147): SPI Nor total size: 16MB
NAND: 0 MiB
MMC: Card did not respond to voltage select!
No SD device found !
hisi-sdhci: 0
In: serial
Out: serial
Err: serial
Net: eth0
Warning: eth0 (eth0) using random MAC address - 96:1c:cb:5a:48:33

Hit any key to stop autoboot: 0
hisilicon #
 
I was able to set the ip address and subnet on my cam..I am now getting a request to read file on the tftp server but it keeps looking for file name 'boot'..

uboot environment:

eth0 : phy status change : LINK=UP : DUPLEX=FULL : SPEED=100M
Using eth0 device
TFTP from server 10.0.0.111; our IP address is 10.0.0.103
Filename 'boot'.
Load address: 0x40080000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
hisilicon #

from the camera I can ping 10.0.0.111 which is my pc that is running the tftp server...if I go to the PC and ping the cam at 10.0.0.103 it's unreponsive until I go back uboot and run tftp boot
 
You must log in or register to reply here.
Top Bottom