Are your IVS settings working for you? Getting motion when triggered? I use Blue Iris for my motion detections, sorry I don't have much IVS experience, but many here do and should be able to help you...
Worlds First Review - Dahua DH-IPC-HDW5849H-ASE-LED / IPC-Color4K-T - 2.8mm Turret
- Thread starter Wildcat_1
- Start date
Chokolinho
n3wb
They work without any problems during the day. However, in the first photo, they do not trigger at night with the newspaper carrier on the bike. What I also find strange is that there are no entries under Ivs in the Nvr although it has already been triggered several times today. Everything is displayed normally in the Dmss app.
Chokolinho
n3wb
I will reset the cameras and then set them up again. I'll hang up one of the cameras today that still has the old firmware on it. Many thanks for your help.
EMPIRETECANDY
IPCT Vendor
For color4K-T settings, here have a guide video, maybe can help you something on the setting.
I wish I was better help, I just know about Resetting after firmware upgrade, the Experts here have taught me that...it does not always help/change anything but it is good practice...
Chokolinho
n3wb
Thank you very much, I will watch the video later. . This is what it looks like for me at night. I left everything on standard and Ai-ssa controls the image.
Attachments
bigredfish
Known around here
Have you recorded motion, a person walking through the scene? Auto/Default settings won’t usually be very good, typically motion blur. But it’s a matter of how much light you have so YMMV
Chokolinho
n3wb
People are displayed as Smd in the Ai settings but not when I go to playback.
Attachments
EMPIRETECANDY
IPCT Vendor
hmm, you posted the IPC-HDBW3849R1-ZAS-PV-S5 pics here, i thought you are using the Color4K-T, the IPC-HDBW3849R1-ZAS-PV-S5 is 1/2.7cmos and can't compare to the 1/1.2CMOS. I thought why 4K-T have such poor pics.
The camera not work well at this low light place, that is the main reason the IVS not work very well. I think need to add some more light to the place.
bigredfish
Known around here
^^^^^
This
This
Chokolinho
n3wb
The camera has a 1/2.8 sensor. I was thinking about buying two IPC-HDW3849H-AS-PV-PRO with the 1/1.8 sensor and replacing them. However, I don't know if the detection range is sufficient.hmm, you posted the IPC-HDBW3849R1-ZAS-PV-S5 pics here, i thought you are using the Color4K-T, the one is 1/2.7cmos and can't compare to the 1/1.2CMOS. I thought why 4K-T have such poor pics.
The camera not work well at this low light place, that is the main reason the IVS not work very well. I think need to add some more light to the place.
A 1/2.8" sensor is even smaller than 1.2.7".
You don't have enough light and are in backlight condition where the faces would be dark as the person is in between the camera and the streetlight.
You need to either add light near the camera or use a camera with infrared.
You don't have enough light and are in backlight condition where the faces would be dark as the person is in between the camera and the streetlight.
You need to either add light near the camera or use a camera with infrared.
EMPIRETECANDY
IPCT Vendor
use 1/1.2cmos full color at low light place, or just use the 4mp IR IPC-T54IR-AS S3.
Dual illumination camera the pic quality is not too good compare to the single IR or the full led one.
I was thinking about buying two IPC-HDW3849H-AS-PV-PRO with the 1/1.8 senso-------This 3 series is lite series, can't compare to the 5 series.
Dual illumination camera the pic quality is not too good compare to the single IR or the full led one.
I was thinking about buying two IPC-HDW3849H-AS-PV-PRO with the 1/1.8 senso-------This 3 series is lite series, can't compare to the 5 series.