Wiring diagram for water damaged rj 45

[TonyR]

Pass-thru, 3 prong contacts for solid or stranded, RJ-45 male crimp connectors on amazon here.
Use your image in your post #13 but with grey and purple swapped as you did before that worked.

Once working and tested, I suggest this time you protect your connection from the weather, neighbors and rodents by waterproofing it (note the use of dielectric grease again) and putting the pigtail and connection in a junction box.

 

[shivammangla]

Pass-thru, 3 prong contacts for solid or stranded, RJ-45 male crimp connectors on amazon here.
Use your image in your post #13 but with grey and purple swapped as you did before that worked.

Once working and tested, I suggest this time you protect your connection from the weather, neighbors and rodents by waterproofing it (note the use of dielectric grease again) and putting the pigtail and connection in a junction box.

I am not using pass through. Using this Cat5e UTP Connector - Cat5e UTP RJ45 Connector in Components | D-Link India.
Are they good for stranded wires ? I have extensively used them in solid cat6 without any problem.

 

[TonyR]

I am not using pass through. Using this Cat5e UTP Connector - Cat5e UTP RJ45 Connector in Components | D-Link India.
Are they good for stranded wires ? I have extensively used them in solid cat6 without any problem.

Not sure why you even asked then.
The specs in your link says stranded.
You've been using on solid.
Whatever cranks your tractor, my man.

 

[shivammangla]

Not sure why you even asked then.
The specs in your link says stranded.
You've been using on solid.
Whatever cranks your tractor, my man.

Bro sorry if you are offended. I just want to confirm because these are chinese d link connector. I can get this only in India. I read somewhere that specs are sometimes wrong for chinese rj45 connectors.
Thanks for your help.

 

[TonyR]

Bro sorry if you are offended.

I was not offended.