Recent content by 1.21 jiggawatts!

on the Microseven M7WP-MIC, is there continuity between the 12v ground and the audio ground? if this is the case, it may be possible that any power adapter you use might inject noise into the audio signal due to the power adapter design. even worse, any noise on your AC line may pass through...

what does "the maximum hdd capacity varies with environment temperature" mean? looking up the hdd specs for my NVR4104/4108-P-4KS2... 1 SATA III port, up to 10 TB for a single HDD. The maximum HDD capacity varies with environment temperature thinking of getting a 10tb western...

i have an issue with the DMSS app that if i search previously recorded video and try to record it on my phone using the app, the DMSS app will only alow about one and a half minutes to be recorded. i tried to update the firmware on my NVR4108...

now with the latest version of the app, when i try to record video in the app, it only saves about one and a half minutes worth, even if i have it recording for five minutes.

didn't help.

i have audio NR off on my cams. if you go to "me" then "setting" on the dmss app, NR is there.

so far, when i playback my cams or cams from a friends house in another city over my wifi here, the app works properly. if i use the cellular data and not wifi, playback stutters. it's strange because my data speeds are faster than my home internet speeds. my cellular data speed is 114Mb down...

i really wish they just kept updating gDMSS plus. the only thing i found wrong with that app was the playback didn't work. i find the ptz on DMSS is slow to respond and some of the buttons don't respond to your finger press on the screen and you have to hit them a few times. i also really wish...

did they release an update? i'm on version 1.96.002 build date 2021.11.25 i does seem to work properly at the moment.

anyone having playback (playback of recording) issues with the DMSS android app? (live playback is fine) when i first install the app, the playback works ok for a bit then it gets screwy when i try to use it later on after using it a couple of times. when i click on a camera, click on playback...

i changed back to h264.h and am using CBR. should i use h.264 or h.264h ? what bitrate should i use for 15fps 1080p?

i have disabled WDR for night. cameras are using smartIR do you recommend against using h.265? i had just switched all my cameras over today. pretty much using highest bitrate shown, VBR level 6. also, what is the next interval up from 8.3ms for the shutter speed? 8.3ms seems a tad bit dark...

though i got WDR working by making the settings in internet explorer, WDR doesn't work while in in black and white mode at night when IR is on. this must be by design?

gives a slightly darker image. but im guessing movement will be picked up less blurry?

wittaj, that is a very informative reply. have changed my main stream settings to: h.265 smart codec off 1080p 15fps vbr quality 6 4096 max bitrate iframe 15 for conditions: wdr is set to 4 for day and night exposure mode is set to auto but maybe i should put it at shutter priority 1/60 for...