whoslooking

whoslooking

IPCT Contributor
Known around here From London
Messages
1,524
Reaction score
548
Points
113
Joined
Last seen

Profile posts Latest activity Postings About

  • Danny LIm
    Need some help here. My Hikvision DS-7608N-E2 8P has gone into 15 beeps and then reboot itself after firmware upgrade. I can ping both 192.0.0.128 and 192.0.0.64 but I'm not able to see NVR taking the file. Is there a special cable to connect to the board, like a usb to pin? If so, you what type of cable is that? Thanks.
    S
    I'm never able to log in to the camera through browser, I can ping the cam and I can telnet into it (not sure what to do once i'm in though).

    I haven't modified any of the files directly on the camera. using iVMS 4200 I can modify the camera's IP address, which works and I can ping and telnet at the new IP, but nothing else. Then after I reboot the cam, it reverts back to 192.0.0.64 -- any ideas?
    S
    I have the DS-2CD2032 with a firmare sticker of 5.3.0
    tried the tftp updater, the only one that ever shows "system update completed" is the "5.30 downgrader 4 lines" file that I believe you created.
    P
    Hi!
    I have bought several DS-2CD1201D-I3 from China. I have spent hours of reading but i just need a straight help from a specialist.
    I am willing also to pay for helping me. I just want to change their language in English.
    It does not mind me if the day of the week will be still in Chinese.
    I justa want a fast tutorial.
    The problem is that the firmware is really new:
    [TABLE="class: deviceinfotable"]
    [TR]
    [TD="class: deviceinfotd"]DS-2CD1201D-I3[/TD]
    [/TR]
    [TR]
    [TD="class: rowheader deviceinfotd"]设备序列号[/TD]
    [TD="class: deviceinfotd"]DS-2CD1201D-I320160221AACH575899750[/TD]
    [/TR]
    [TR]
    [TD="class: rowheader deviceinfotd"]主控版本[/TD]
    [TD="class: deviceinfotd"]V5.3.7 build 160121[/TD]
    [/TR]
    [TR]
    [TD="class: rowheader deviceinfotd"]编码版本[/TD]
    [TD="class: deviceinfotd"]V7.1 build 151125

    Many Thanks![/TD]
    [/TR]
    [/TABLE]
    D
    Hello, can you help me regarding: [h=2]Hikvision DS-2CD27324-IS v5.3.0_150513 after firmware update not working[/h]
    D
    Hi Darren

    Great job on the video tutorial on the mtd hack made easy vid. I have a ds-7616N-E2/8P NVR V3.0.10, build 141126 and want to upgrade the firmware to 3.3.4. Can i just put the firmware on a usb stick straight to the nvr?? Any issues?
    S
    Hi Darren - if you buy Hikvision products on the grey market please be aware it will not be supported by the U.K. Team under warranty and you cannot engage with tech support
    M
    I have 8 hik turret cams that need the firmware fixed due to rebooting would you be willing to remote in and fix for a fee
    whoslooking
    It will depend on whether the NVR was hacked, or has regionally changed firmware or an old firmware like 3.08 which allows both regions at the same time.

    But the short answer is yes, they can all work together.
    V
    You seem to be very knowledgable in this area. I bought a 7716n-e4/16p NVR multilingual. Then I bought 8 hikvision multi language cameras and then 4 English hikvision cameras. I know the cameras that are multi language are Chinese versions with hacked firmware most likely, but will all 12 of these cams work on that NVR? I believe the NVR is Chinese region too so I'm hoping that helps with using those cams but then I'm worried about th English cams.
  • Loading…
  • Loading…
  • Loading…
Top Bottom