Recent content by Allodo

  1. Allodo

    Dahua IPC unbricking / recovery over serial UART and TFTP

    @djlp Thx for the link :) I tried it with "No Risk, No Fun" and now my VTO works again :)
  2. Allodo

    Dahua IPC EASY unbricking / recovery over TFTP

    Yeah Succeded :) I only made an File called failed.txt in root-Folder and then, after flashing everything nothing more happens. Then I made an ping on 192.168.1.110 and get an answer. I now flashed Firmware normally with Config-Tool and everything works fine now :) Thx a lot for help :)
  3. Allodo

    Dahua IPC EASY unbricking / recovery over TFTP

    I've tried it and TFTP seems to upgrade Firmware so far, but then I get an error with an failed.txt. This was shown while updating-Process: Listeninig On: 192.168.254.254:69 Client 192.168.1.108:1920 root\upgade_info_7db780a713a4.txt 1 Blocks Served Client 192.168.1.108:1920...
  4. Allodo

    Dahua IPC EASY unbricking / recovery over TFTP

    Okay, thx for quick Reply. Then I try it with Commands.txt as above ;)
  5. Allodo

    Dahua IPC unbricking / recovery over serial UART and TFTP

    @djlp Now I got my bricked VTO back and tried the solution of your linked procedure but I got an Problem. With wireshark I see that the VTO is trying to get Firmware over TFTP. So far so good :) But when I run the Console.bat NCat starts and nothing more happens :( I tried this to get correct...
  6. Allodo

    Dahua IPC EASY unbricking / recovery over TFTP

    I've an bricked VTO2000A and try to unbrick it. Therefore I connected it over an Switch an changed the IP of my PC. So far so good. I run Wireshark, an when I connect the VTO I get following Info from Wireshark: Source 192.168.1.108 Destination 192.168.254.254 Protocol TFTP: Read Request, File...
  7. Allodo

    Dahua IPC unbricking / recovery over serial UART and TFTP

    The guy who has my bricked VTO has contacted me. So I hope I will get it back soon :)
  8. Allodo

    Dahua IPC unbricking / recovery over serial UART and TFTP

    Could you please mark the Pins on the Picture I've uploaded, so everyone can see it directly
  9. Allodo

    Dahua IPC unbricking / recovery over serial UART and TFTP

    I hope I will get my bricked VTO back, so I can try to find the RX :)
  10. Allodo

    Dahua IPC unbricking / recovery over serial UART and TFTP

    Sorry for the late reply but I couldn't log in. Don't know why. Everytime I get an Error Message when I push the Login-Button. I have send my bricked VTO to an member of an other forum, because he want to try to unbick it. But then he has no time an didn't send it back. The pictures I've made...
  11. Allodo

    Dahua IPC unbricking / recovery over serial UART and TFTP

    Thx :) My USB-TTL-Dongle is still in Shipping progress :( You mean that the first on the left (square one) should be TX or RX? When I use my Multimeter an hold it on that measure Point on Boot Process the Voltage must be varying the Voltage because data will be transfered? Is this right to...
  12. Allodo

    Dahua IPC unbricking / recovery over serial UART and TFTP

    I'm glad I found this Thread because I have an big problem with my VTO2000A. After I've flashed an modified Firmware I can't get any connection to it. When I sniff ports I will see nothing. It seems to be that there is no open port. Because of this the only way to rescue my doorbell is to...
Top