Recent content by alohaalex

I when to motion detection to make sure it was enabled, then did the same with recording schedule, made sure that continuous was selected and Monday through Sunday 0-24 hrs was highlighted blue then saved all that.

I when to motion detection to make sure it was enabled, then did the same with recording schedule, made sure that continuous was selected and Monday through Sunday 0-24 hrs was highlighted blue then saved all that.

I have several hikvision cameras at home but 2 of them don’t record anymore, I’m able to view live but when I go to recording it shows empty. I reset the cameras I bought new sd cards, I reformat them, I checked the settings of this 2 cameras and compared with my other 8 ones and everything is...

If I’m at home and my phone is connected to the wifi all the cameras work but when I’m not connected to the wifi only 4 cameras work and 6 don’t , sometimes all them work but the majority of the time I only can connect to 4, I use a switch to connect all the cams and they record to the sm cards...

One of Hikvion cams stopped recording to the sd card, I’m able to see live but it doesn’t record no even when I press the record, I replaced the sd card, reformated, checked the configuration settings and it the same as the rest of the cameras, reset the camera to the original factory settings...

Hi guys, 2 days ago I noticed That one of my 10 cameras was locked, tried to login but it didn’t let me, it kept saying wrong password, the rest of the Cameras were fine, so I reset the password and everything went back to normal, a few hours later the camera was locked again so I reset the...

Hi guys, I have 10 cams in my house and I love the iVMS-4500. Im planing to put 10 new cameras in my store, this will be separated for what I have at home. is there a way to download a second iVMS-4500 so when I want to see my home or store the cameras don’t get mixed and they open all togethe...

Will this help me to transfer data over the power lines and also power the camera? Because that is what I'm looking for.

Guys, my cameras are wired with cat 6, I have 9 logitech alert 700e cameras, these cams are Poe, so I'm replacing them with hikvision cams but I'm using the cat 6 that is already installed and the power adapters from these cameras. Eventually I want sell these cameras (Logitech) and I will need...

Yes Dalepa, that is what I need any recommendations? The logitech adapter works great but I can't buy them anymore now, I'm looking for a Replacement one. thanks

I need one power injector that will connect to my router and another that wil connect to the camera so the data will be transfer using the electrical wire of the house, will the option that you recommended do that?

Guys, I'm using the power adapter from my Logitech alert 700e and it works great but I'm looking for something else that I can buy and that will work well with a hikvision ds-2cd2632f-is any suggestions? Thanks

Febderman thank you very much for your support, I did step by step what told me and now I can have access to my cameras using my cell phone, this forum rocks!:)

so this will need to be done by logging in the hikvision page with ip address of this particular camera correct? will changing he port from 8000 to 8001 will affect the viewing of this camera in my other deices like my pc and ipad (I'm able to see this camera in other devices,the only problem...

one more thing I'm able to see one camera on my phone so far (using cell data, no wifi) the cam with port starting and ending in 8000 but when I tried to do the same with the second cam I'm getting an error.