Recent content by Andykev

  1. Andykev

    One camera "no video" for unexplained 6+ hour gap

    UniFi let me set IP for any device as static Both the router and UNIVIEW camera configuration are matched static IP’s DHCP is off at both ends for the cameras The pool is wide open but that’s irrelevant using static as I understand it
  2. Andykev

    One camera "no video" for unexplained 6+ hour gap

    "Possibility" something to do with router? The Unifi did not have a static IP set, but I remember setting one for each Cam 1 and Cam 2. But today only Cam 1 had the static IP so perhaps something happened? Will monitor it, and it has been reset to static.
  3. Andykev

    One camera "no video" for unexplained 6+ hour gap

    I don't think the IR died... sunrise and daylight was well before the 8:42 AM when the camera suddenly resumed recording. I checked all the settings on the camera interface and nothing changed. I don't think the camera has a log, not sure will check. The cameras are on static IP's.
  4. Andykev

    One camera "no video" for unexplained 6+ hour gap

    I checked the video this morning and discovered that one of my cameras (I only run two!) stopped recording about 1AM and showed "no video" and then began recording around 8AM. Camera 1 had no interruptions, just Camera 2. I checked the database logs and rebuilt the DB but there were no apparent...
  5. Andykev

    I upgraded to Windows 11, new CPU, Memory, and a Motherboard - Success!

    I am using the Cooler Master HAF XB which you can open on sides and the top Looks like a test bench layout and support for 4 WDPurple and 3 SSD lots of room
  6. Andykev

    I upgraded to Windows 11, new CPU, Memory, and a Motherboard - Success!

    I decided to upgrade just my CPU, memory, and Motherboard. I was on an older I7-6700, which worked fine... but I the annoying "Windows end of life" messages...time to upgrade to Windows 11 (which I use on my laptop and main computers). The current CPU and motherboard were not eligible for the...
  7. Andykev

    Camera IP changed on it's own

    Excellent information. My search words did not pull up this known issue (I tried looking first before posting). So I can roll back, should it be 5.6.2 or an earlier version? He said "newer than" so I want to be sure. I don't need to be a "beta tester" :)
  8. Andykev

    Camera IP changed on it's own

    I am on 5.7.9.6 Here is the BI log and it changed the IP to something I do not have... 192.168.0.13
  9. Andykev

    Camera IP changed on it's own

    BTW I am using Ubiquiti UDM and the cameras are set to fixed IP's. I went back and looked at the BI Log again and the IP showed access by the IP for my Iphone... but I have no idea why that happened. I did not log in remotely that morning. Stumped.
  10. Andykev

    Camera IP changed on it's own

    NO I have updates turned off, have been for months. I'll check those links. Thank you.
  11. Andykev

    Camera IP changed on it's own

    A few days ago my IP address for CAM 1 changed on it's own to the IP address for CAM 2. I am only running two Uniview 4K cameras on BI with CPAI. Never a problem. We were not home, so I can't understand why CAM 1 suddenly began recording with the IP of CAM 2...so I ended up with duplicate...
  12. Andykev

    Power outage mini-diasater

    It’s a I7-6700 Gigabyte Z170 probably 8 years old Maybe?
  13. Andykev

    Power outage mini-diasater

    I did not think a 45 minute power outage on a 107 degree day would cause all kinds of problems with Blue Iris and the Code AI.!! Yes I am on a Cyberpower 1500va battery backup. When the power came back on, the Code AI did not work, the cameras were showing video feed but zero "triggers". Also...
    • Andykev
    • Thread
    • Replies: 5
    • Forum: AI
  14. Andykev

    Nvidia big headache lost my Code AI detection

    First, I got things back working. However I removed the Nvidia GTX 1650 from the computer and switched Code AI to "CPU" as well as the associated settings in BI. Yesterday, I got the "popup" to update the software for the Nvidia card (nothing unusual about that) with the "game ready" drivers...
    • Andykev
    • Thread
    • Replies: 0
    • Forum: AI
  15. Andykev

    I keep getting "Nothing Found"

    I did the install yesterday... the only thing I did which "may" have kicked it into gear was I "unchecked" the USE GPU and then rebooted, the rechecked it. I am using a Nvidia GTX1650 so it should have plenty of horsepower to run two cameras. My CPU is an I7-6700 with 32g RAM so I don't think...
See more
Top Bottom