Its been a few months but I don't think you use the Hitesh files until it's up and running in Chinese. Make sure you completely shut it down after running the TFTP software.
that seems to be what is happening. I add the camera to the NVR at the screen above but it never connects.
The NVR has the yellow triangle (Unknown Error)
The Gui on the NVR states (Offline Parameter Error)
I'm sorry, I'll try to clarify.
I've set the Gui web password on the NVR fine.
I can access the cameras normally from the gui of the NVR
I can access the cameras from the web via ip address with the longer required password.
SADP allows for longer passwords.
If I go to the NVR and "add IP...
I'm setting up an older DS-7608N-E2/8P. When I get to the password screen it only allows numbers. All new cameras require a letter and numbers. Is there a setting or firmware that will allow the letters and numbers?
Thank you.
Ok. I just about gave up then rebooted my PC and now the camera shows up in SADP. I did the MTD hack and its working.
BUt, The alarm is going off constantly. how do I disable that? I went into PIR and turned off whatever I could find.
any ideas on this?
thanks
Tom
I worked on the DS-2CD2432F-IW. It is stuck in an reboot cycle. I have a constant ping going to it. Its got a pattern that look like it's restarting.
any ideas? I'd like to get an actual link for 5.2.5 probably Chinese
I have multiple cameras I think I've bricked. I've used the tftp app before so I'm somewhat familiar with that. I'm wondering where I get the older versions to upload with the tftp app.
It states in the instructions to rename the file to digcap.dav not digicap.dav Is that a typo?
It...