Recent content by cleanrf

  1. C

    Dahua sd10a248v PTZ takes a really long time to reboot 10 minutes plus.

    Anyone have a suggestion?
  2. C

    Dahua sd10a248v PTZ takes a really long time to reboot 10 minutes plus.

    If I lose power or power cycle, reboot the camera etc. It will try to restart multiple times before it finally finishes and comes back online. It shows to have the newest firmware. It has done this since I purchased it 27 months ago. I am using blueiris 5 but I doubt this has anything to do with...
  3. C

    Possible to flush Q-see QCN7001B cameras with Dahua firmware?

    Well I'll be dipped, http://192.168.1.36:85/ let me in! Thank you! I have had those cameras since 2012, haven't used them in 5 years but had a need for them where FOV, resolution etc wasn't important. These fit the bill.
  4. C

    Possible to flush Q-see QCN7001B cameras with Dahua firmware?

    I would love to have a better camera, I am only using one of them and funds are super tight right now. I will upgrade in the future for sure.
  5. C

    Possible to flush Q-see QCN7001B cameras with Dahua firmware?

    I have tried every port that zenmap found typing it into the address bar of chrome like this 192.168.1.33:554 etc with no luck.
  6. C

    Possible to flush Q-see QCN7001B cameras with Dahua firmware?

    I see the camera ip when logged into the router, the camera works with blue iris but I lose signal around time daily and have to reenter the ip into blue iris. This is one of 10 cameras I have using blue iris. I have set static ip's on all the others but cannot access web interface to do that...
  7. C

    Possible to flush Q-see QCN7001B cameras with Dahua firmware?

    I am assuming the web interface has been removed, maybe not but just entering the ip is a no bueno. Do you recommend a tool that will allow me to access this camera to change settings of the camera?
  8. C

    Possible to flush Q-see QCN7001B cameras with Dahua firmware?

    Scan the ip address? More details please. Thanks
  9. C

    Possible to flush Q-see QCN7001B cameras with Dahua firmware?

    I have the same question, I cannot seem to log into these cameras to set static ip address. Entering the ip address of this camera in the address bar of a windows 10 machine, chrome, IE etc does not access camera settings. Any help?
  10. C

    Dahua PTZ wont stay logged in.

    Maybe so but it flaws my ability to stay logged in. ;)
  11. C

    Dahua PTZ wont stay logged in.

    That is a serious flaw. Unless I am missing something Blue Iris lacks the "click with mouse" to move the camera to a desired target so I record with Blue Iris and use the camera with the built in interface. The problem is its always logged out when I need to use it and by the time I get it...
  12. C

    Dahua PTZ wont stay logged in.

    I have the dahua sd10a248v. When using the built in web interface it logs out every 15 minutes or so. This is a pain in butt. I cannot figure out how to change this option in the settings. Any help would be appreciated. Thanks
  13. C

    Analogue joystick control of Hikvision IP PTZ cameras

    That is a good question that would be an easy solution.
  14. C

    Analogue joystick control of Hikvision IP PTZ cameras

    I think I am going to go the add more wire route. The lag would probably piss me off.
  15. C

    Analogue joystick control of Hikvision IP PTZ cameras

    Hello Tim, did you ever find a solution?
See more
Top Bottom