Recent content by dampsand

Hi, I think I cracked it - for some reason the linkage method to 'record' was unticked. Hopefully this thread will help others :)

I've gone through both camera's web-GUI and checked every setting and they match, between the POE hardwired that is recording and the WiFi manually added that isn't. So I'm guessing the setting is either a network issue? Or something in the NVR that I'm missing? If you look back at my screenshot...

Hi, the NVR is a Hikvision too: DS-7604NI-E1 The streams for both the POE bullet and the WiFi Cube are 1920x1080p. I re-checked the Storage > Schedule Settings within the NVR web-GUI and both cameras are light purple, 'Event'. The POE bullet is working fine like this. You can definitely have...

Hi @alastairstevenson - I appreciate you revisiting this one. The NVR schedule is on continuous as you mention. The cameras themselves, via their own web GUI, are setup to motion/event based, 24/7. The POE one is working fine. Is there any screenshots I can share at this stage? Shall I do...

Which page is this? This is the only page listing out all the cameras attached to the NVR and their status. I think we've got our wires crossed. The Cube camera is working and is within the NVR group - it's the 2nd camera in the list. As mentioned I can view camera 1 (POE) and camera 2 (the...

Hi @Del Boy here is a screenshot of the camera management page, as viewed via the NVR. The Cube is the 0.98 one - I reserved that IP in the router settings to stop it changing as it gets unplugged a fair amount. I can view both cameras via the NVR, either via HDMI cable or the IVMS-4500 app...

Ok thanks for clarifying. In which case, any idea why this Wifi connected camera is not recording? I go to Playback and there's no record file, even though I know motion is happening each night. The other PoE cameras, connected direct to the NVR, are working fine on the same motion schedule.

Yep, I checked each one just to be sure. But isn't that superseded by the fact the drop-down for each camera is set to 'Continuous' as you can see in the screenshot?

Thanks @alastairstevenson , but for some reason it's not working. Here's a screenshot of the NVR settings page, all 3 cameras (as described in my OP) are listed and they are all 'enabled'. Any further thoughts? Screenshot at:

Here's the setup: Hikvision NVR 2 x Hikvision bullet cameras connected directly to NVR and powered over PoE 1 x Hikvision Cube camera, model DS-2CD2442FWD-IW, powered by mains and connects to WiFi. I can add all the cameras to the NVR, in terms of monitoring them, and to the iVMS-4500. What...