Recent content by deun2013

Thanks mate for your valuable inputs ! I will ask for suggestion / help from CCTV installers.

Yes there are sockets in each room. As you are expert in networking...Wouldn't it be ugly if I: Connect the switch to the RJ45 socket in the room Add a cable RJ45 , going from switch to wall , to expose the cable oustide (it would be weird to have a hidden cable in a PVC pipe, going from the...

Sounds good! Usually do you install camera under the roof? To me it looks weird to use a switch combined with ups in each room and then add a rj45 cable going from switch to outside?? Is that not too much? I do not like cables.

Reading your last post, you are expert in security cams installation?

But if I want to use it on a TV with HDMI .. What is you current configuration ? Do you have the NVR close to a TV?

Thanks for all those points, I am taking notes of that while considering my installation. I did not think about having a regular NVR and using POE switch instead. For the NVR installed closed to the TV, I am just afraid of the potential thieves that might steal it in case they find it - so I...

Thats a good point - For the driveway I was indeed planning to put another camera recording the driveway - I wanted to put in on top of the garage - but I would need to use CPL probably (not pulling RJ45 wire) The other side of the house does not have any window, its just a wall - if you look...

Hi I am a bit lost when it comes to the installation of the cameras and NVR and I am no so sure what s the optimal configuration of the complete setup. I would like to avoid pulling RJ45 throughout the house. At the moment, i bought: 2 bullet cameras 2.8 that I planned to use in the back...

Ok I got it worked - I forgot to draw a zone...

Does it mean that It is not possible to do so , with my NVR? I searched in many threads and they keep talking about GET. So even if the Cloud feature exists in my NVR, I cannot use it ? Thanks.

Hi, I am trying to test the video tampering using the NVR. However, when I tried to move the camera it did not capture anything. How can I test this option? Thanks d

Hello I am trying to set up the cloud storage on a HIKVISION NVR. However, I do not have the option to select "One Drive" and the GET button is not appearing, as mentioned in there : How to set up Hikvision cloud recording on One Drive — SecurityCamCenter.com Any reason why I cannot configure...

Wonderful coney you are a star! Thanks for your time and help ! It works fine, I do not need to configure this in both sides , I just need to set this in the NVR and activate the strobe and alarm as you suggested :).

Hi Cony you are right - sorry I reformulate my question. If you want to detect intrusion with strobe light, do you need to configure this twice? Once in the NVR to record, and another time in the camera itself to activate the strobe light? What I tried: I activated the strobe light on the...

Hi Cony, Thanks for your prompt answer. I think I am mixing two things. Now in the NVR, there are Events to be configured, but also in the GUI of the camera itself. The strobe light and siren work, however, it does not record anything when I configure this in the camera itself. Is that...