I am experiencing the same issue as others in the thread, where am not getting any face images, or just a few show up on one or two cameras and it seems intermittent at best. I am on the most current version of CodeProject.AI and the most current stable BI build as well. I am running an Nvidia...
@wittaj wanted to thank you for taking the time to put this together. Im on the site a fair bit and missed these suggestions from you on other posts. I tried these settings on several cameras last night and it made a pretty big difference. I had been using shutter priority vs manual and...
I started getting the error "lost connection to service (2)". The system has been very reliable with no errors until recently when it started popping up stopping BI from running. I tried the current most stable version of BI along with the latest build. I am running this with...
@CanCuba, thanks for the link.
I used a similar relay device to interface with the "Alarm Out" of the Dahua cams for my project, so I would not have to go through Blue Iris for the trigger, and just use the Dahua AI for person and vehicle detection..
The problem I ran into, was I did not...
@TonyR, I am wondering if I should go with the Shelly1 Pro for Ethernet for the added reliability of ethernet? Have you or anyone else had a shelly1 device go offline for any reason? It's only passing a very small amount of data when called, so assume they are reliable assuming the wifi...
@TonyR, @Bob Ebaugh I really appreciate you taking the time to respond and provide some ideas on how to accomplish my goal. Once my other Shelly1 comes in, I will start the testing. I spoke to my alarm guy today and he can provide a dry contact relay either NC or NO. The alarm and BI system...
One thing I am looking to do is to change profiles when my our Honeywell Alarm system is armed. They have a dry contact relay system that can be used to either close or open a relay.
I would like to have the shelly device take this signal and when the relay is triggered from arming our...
Older thread, but I wanted to drop in and thank @TonyR for taking the time to write this up. I purchased one of the Shelly1 devices to test using Tonys instructions for a Blue Iris /Alarm project I am working on and I needed some sort of script controlled relay triggered out of Blue Iris and...
Reviving an old thread to see if there have been any updates on this. I would like the ability to enable or disable the alarm out that is triggered by IVS person detection on my newly purchased Dahua cams from Andy.
The goal is to send a command to enable and disable the alarm out relay so...
That is great to hear. I recently ordered some newer Dahua camera with the IVS AI person/vehicle detection. Do you think that would be more reliable with less false triggers than BI with CodeProject AI? I am not familiar enough with the Dahua IVS to know if you can tune the AI to reduce false...
@wittaj thank you for the tip, I will give that a shot. Maybe that will work for us! You or anyone reading see any issues with the plan and what I am trying to do?
Thank you for your reply! I have experimented with cloned cameras before and it seemed like I would get timing issues with my alerts in the database when doing so when using the app an trying to capture snapshots, or checking alerts on the timeline things were not timed correctly. It could be...