Recent content by dromero

  1. dromero

    New RCA HSDB2A 3MP Doorbell IP Camera

    such a pity that the doorbell presses are not exposed over onvif.... would solve my not working relay problem...
  2. dromero

    New RCA HSDB2A 3MP Doorbell IP Camera

    Not exactly the answer to your question, but I have an ezviz doorbell and after disabling the chime with the latest firmware and going back to the laview firmware the chime comes back on.
  3. dromero

    New RCA HSDB2A 3MP Doorbell IP Camera

    Thanks but I've the Finder from this list, 8V and 12V version and it's not working
  4. dromero

    New RCA HSDB2A 3MP Doorbell IP Camera

    What relay do you have? I can't get it to work with the 8V AC Finder relay and neither with the 12V AC Finder relay :-( Tried with Mechanical and Digital in the app. Could the powerkit be dead?
  5. dromero

    New RCA HSDB2A 3MP Doorbell IP Camera

    Now I've connected it like on the diagram on 101 and while at the beginning it works after a while the led becomes red and the relay starts clicking consistently. Removing the Relay and powering it directly gives back the blue led. The relay and the Transformer are both AC 12V and the...
  6. dromero

    New RCA HSDB2A 3MP Doorbell IP Camera

    Just found some wirings on other posts, apparently the Powerkit should only be parallel to the relay not to the doorbell. Now the buzzing stopped and the relay is closed when not pressed and opened for some time when pressed. Is this how it should be? I expected the relay to be closed only when...
  7. dromero

    New RCA HSDB2A 3MP Doorbell IP Camera

    Currently I've no load/consumer on the relais as I will connect it to my home automation system (loxone) and the setup is just for testing.
  8. dromero

    New RCA HSDB2A 3MP Doorbell IP Camera

    Thanks to @pete_c, @Emiks5 and @alexdelprete ! I've put the camera near another router and now it's working flawlessly. Also the relais closes when I press the button. Not sure if it was an incompatibility with the wifi router (had this with an rpi once) or if I had a powering problem... One...
  9. dromero

    New RCA HSDB2A 3MP Doorbell IP Camera

    Thanks, currently it's near the router. Maybe I'll try to put it near another router. Do you have an SD card in it?
  10. dromero

    New RCA HSDB2A 3MP Doorbell IP Camera

    It's not the small files, also when I manually stream with vnc from rtsp:/admin:****@192.168.1.173:554/Streaming/Channels/1 after a while it stops being accessible... and I can't reopen it... do you guys who are able to stream 24h disconnect the camera from the cloud?? Or does it hickup...
  11. dromero

    New RCA HSDB2A 3MP Doorbell IP Camera

    Hello everyone, i'm back with a new power supply, 12V AC, the same as @Emiks5 suggested. I also got a new camera because I still couldn't get a constant stream after using the new power supply :-( I'm using vlc as follows: record.bat @echo off :loop set hour=%time:~0,2% if "%hour:~0,1%" == " "...
  12. dromero

    New RCA HSDB2A 3MP Doorbell IP Camera

    I have an Ezviz, it's the only brand you can get in Switzerland in the Swiss stores. I also hope Ezviz adds onvif support as asking for support is easier with official firmware on the device.
  13. dromero

    New RCA HSDB2A 3MP Doorbell IP Camera

    Is anyone capable of playing a sound thru the speaker of the doorbell from a script?
  14. dromero

    New RCA HSDB2A 3MP Doorbell IP Camera

    It's the onvif events API, have it working with Nelly and Laview firmware. That it's unstable doesn't come from the API but from my underpowered doorbell (at least I hope that), I'm waiting for a new transformer. I'm using this lib, works flawlessly: https://github.com/agsh/onvif I also looked...
  15. dromero

    New RCA HSDB2A 3MP Doorbell IP Camera

    Yes, and for now it works as good as it can with the doorbell API being that unstable, good reliability test for the script
Top