Recent content by Eman25th

Issue I've ran into in the past is that my phone will see that the wireless network has no internet connection and will hit the mobile network with any connection requests rather than the local wireless. my work around was to turn off mobile network on the phone when needing local access.

camera properties -> video tab -> 360: drop down box ( halfway down on the right side) Try wall or ceiling setting and then check the recordings.

I am looking to record a feed from a camera that is at site A, at both Site A and Site B. Both sites are running Blueiris, i attempted to forward the rstp port and record at Site B but was unable to connect. I feel like i am over looking a simple solution to this.

I've replaced half dozen windows 8 PC sticks with Raspberry pi 3s, no issues also. I used this to turn off screen sleep. sudo nano ~/.config/lxsession/LXDE-pi/autostart Add/save @xset s 0 0 @xset s noblank @xset s noexpose @xset dpms 0 0 0

That was the issue, admin account had be limited to those two groups. Thank you so much.

One of my blue iris apps is no longer displaying all the cameras previews (only limited to two smaller groups) but is still recording and operating as normal despite not being able to see the feeds from within the blue iris program. The bottom left group filter only displays the two groups and...

Looking at adding 60-80 more cameras to a existing 38 camera setup. What is the recommended specs for a 64 camera setup(assuming standard 1080p cameras). Skylake/kabylake i7 seems like the go to for 15-25 cameras but i didn't see any builds going much higher.