Not exactly ... The camera has a motion detector and a twilight switch. When both are active, the LED-s turn on and illuminate the terrain. If there is no movement the LED-s will turn off after x time.
Completely new.
It turns on in the dark(no movement) ,LED lighrt on the camera, and not turn off. It can not be turned off in the settings, it is constanley lights.
How do you disassemble this camera?
Photos possibly exploded drawing?
https://de.aliexpress.com/item/32980814707.html?spm=a2g0s.9042311.0.0.47494c4dMJgNXj
Thanks
Disassembling the camera
Somebody has already sorted out a camera like this. Photos possibly exploded drawing?
https://de.aliexpress.com/item/32980814707.html?spm=a2g0s.9042311.0.0.47494c4dMJgNXj
Thanks
Dear Forummates. My problem is :with an ANBIUX P06 Chinese IP camera.
https://www.aliexpress.com/item/33038877752.html?spm=a2g0s.9042311.0.0.27424c4diRiQRY
The LED light turns on when moving in the dark. After that they are constantly light and do not turn off unless it is daylight. Anyone have...
I have a Zilink Speed Dome Wi-Fi Outdoor PTZ Camera(2.8-12mm autofocus IP66, Onvif H.264 HD 960P. My problem: the camcorder -programm does not always find the camera , or the camera is disconnected from the WAN- mains and Is also the same in Wi-Fi mode ( LAN - Network)This phenomenon occurs...
"I have the same problem with Owsoo 16ch nvr - it finds the cameras fine, but is only showing 4 of the 16 images, the rest day "server broken". I have set all cameras IP to the same subnet and checked all usernames and passwords - they work fine on CMS and web browser, but not on crappy Owsoo...
Thanks for the answer.
The camera had previously shown the image via the NVR. The firmware of the camera has been updated. Others have not changed. The CMS does not go with the camera with IsPy on the PC. If I manually enter the camera into the NVR, it does not work. I have no idea.
Thanks for the answer.
Kamera Typ :
Zilink IP PTZ 5X Zoom Outdoor IR Dome CCTV Security IP Camera Wifi Wireless CAM
(Zilink IP PTZ 5X Zoom Outdoor IR Dome CCTV Security IP Camera Wifi Wireless CAM | eBay)
The login/password of the camera is OK.
They are writing stream access problems...
Thanks. Firmware -update is OK. The problem is the same. The Owsoo 4 Channel NVR can find cameras in the network, but it does not show the picture. Error messages(
Write this out ):Not connected, Server broken.
This is my problem. The Owsoo 4 Channel NVR can find cameras in the network, but it does not show the picture. Error messages:Not connected, Server broken.
Firmware ist the of the new state.
Thanks.
Hallo Hermann,
Der OWSOO 4 NVR ist vorher gelaufen . Ich habe die Kameras-Firmware aktualisiert, sonst nichts.Ich versuchte die neu Firmware( für 4 Kanal) aufzuspielen. Fehlermeldung : keine Firmware -Files vorhanden. Muss ich von den 4 Files vielleicht nur einen verwenden? Dann welchen ? Viele...
I found this on the Internet. This can be solved with the OWSOO 4 CH NVR?
"1. NVR can detect / find IP cameras but can not display the image.
If your NVR can detect and find IP cameras, they can not display the image. You must then modify the NVR video stream type. You can increase NVR decoding...