Recent content by Goatmilk

  1. G

    Updated Router - Can find Cams

    well the cam ip range is 192.1xx.1 and the new router ip is handing out from 192.1xx.4. and so on, so im guessing that is the problem and reason for it not showing up. is it possible to change the ip cams instead of the router, because i have 2 routers and they are crashing with the ranges, and...
  2. G

    Updated Router - Can find Cams

    its the same Router only updated firmware. any way to find out what the old one was ? check blue iris?
  3. G

    Updated Router - Can find Cams

    Hello , so i have been running Blue Iris with my Dahua Starlight 2mp ( if i remember correctly) bought from Andy aliexpress. But i updated my router yesterday and it switched the local ip or the one the router gives out to connected hw, i know cant find the cameras even in the router under...
  4. G

    Need guidance in a new 4 Cam system

    Thank you kindly sir !
  5. G

    Need guidance in a new 4 Cam system

    Allright , so i should not use the DHCP setting on the camera , i should just use the static ip adress and just change the last letters to a range outside the routers DHCP, and this will not cause problems Even though i run router to switch to PoE switch for the cams ? I dont need to change...
  6. G

    Need guidance in a new 4 Cam system

    hello guys, so i got my cameras from Andy, and everything looks great BUT i have a problem, i tried to sign in to each camera because they have same ip so when i log into one camera it just flips between the 4 i got showin the pictures for maybe a second before it shifts to the next one. i also...
  7. G

    Need guidance in a new 4 Cam system

    No , this one : 1080p app controlled smart doorbell camera PoE wireless Wi-Fi AC 8-24V DC 9-36V built-in PIR motion sensor Yoosee app And i added the USB dongle for inside noise as well or chime when the button is pressed etc
  8. G

    Need guidance in a new 4 Cam system

    Th Thanks for the input ! I just ordered 3 starlight 2mp from Andy and the inside cam mentioned above. And for the door bell i tried the Yoosee doorbell onvif PoE i will report back on it as i dont believe anyone has tested it yet , that i could find at least.
  9. G

    Need guidance in a new 4 Cam system

    Thank you kindly brother for your input , much obliged
  10. G

    POE ONVIF compatible doorbell with WiFi/poe chimes

    I ordered one and will try connecting with Blue Iris and see how it works
  11. G

    Need guidance in a new 4 Cam system

    If you see the pictures were the cars are in the front of the house i want coverage on both end of corners there both going in a V pattern towards the middle to they cover the entire front. And on the side i was thinking one would do, but i should perhaps add yet another one. I had the idea that...
  12. G

    Need guidance in a new 4 Cam system

    Nobody got anny suggestions ? Is there a doorbell that is no wifi Onif POE CAM that anyone know of or have tested ? Also i have reviewed everything up and down with the suggestions above and testing etc. My demands is basically i want audio / built in microphone . And good quality both at...
  13. G

    Need guidance in a new 4 Cam system

    Ok guys , so here it is. I added a camera screenshot from my phone. So basically what im thinking is the entire front is my front yard - parking space - i want to more coverage then the dome i have now and better picture quality, it’s not bad but i want better. Also i want a second one in the...
  14. G

    Need guidance in a new 4 Cam system

    Waow ok i see , i stand corrected . Maybe i should take some photos to better show were i wanna put them and maybe you guys could give some inputs
  15. G

    Need guidance in a new 4 Cam system

    What about NVR type ? The replies to this threads seems to be the same read the cliff notes, know your use area , plan etc . Im willing to bet that 98% of people that visit and frequently this forum wants the same thing. A plug and play system that gives good picture both day and night to the...
Top