Recent content by gubergren

  1. G

    Powering 2-Wire VTH1550CHW-2 without VTNC3000A

    It‘s the same in that github issue, that board looks exactly the same and the port is at the same location, its just the other board that is different. Yes i have worked with serial terminals before...
  2. G

    Powering 2-Wire VTH1550CHW-2 without VTNC3000A

    Would that show stuff on the display itself too? Where are the UART pins and what are the pinouts? EDIT: Is that the RS485 pins?
  3. G

    Powering 2-Wire VTH1550CHW-2 without VTNC3000A

    Doesn‘t the VTH have an OS? i just want to see it boot up even if it throws an error...
  4. G

    Powering 2-Wire VTH1550CHW-2 without VTNC3000A

    Hello! Is there a way to power up the 2-Wire VTH1550CHW-2 without the main controller?
  5. G

    Need help identifying and unbricking IPC

    Here is the log for a successful flash U-Boot 2010.06-svn3112 (Mar 18 2016 - 16:13:13) I2C: ready DRAM: 110 MiB gBootLogPtr:00b80008. spinor flash ID is 0xc81840c8 Fail to get uboot hd. partition file version 2 rootfstype squashfs root /dev/mtdblock5 TEXT_BASE:01000000 Net: Detected...
  6. G

    Need help identifying and unbricking IPC

    I don't think so, I managed to interrupt the boot to run printenv: >printenv bootargs=console=ttyS0,115200 mem=110M root=/dev/mtdblock5 rootfstype=squashfs init=/linuxrc bootcmd=sf read 0x200100 0x8000 0x8000;sf read 0x2000000 0xf0000 0x180000;bootm 0x2000000 bootdelay=3 baudrate=115200...
  7. G

    Need help identifying and unbricking IPC

    As the title states. I have attached some images of the IPC itself and the serial output. I tried various firmwares which none of them got the device to boot into Linux properly. Any help would be appreciated.
Top