guykuo's latest activity
-
guykuo replied to the thread How to create a low humidity environment to put bullet camera back together?.When I did resealing, I put the camera and silica packs into my dehydrator for a few hours. Then reassembled while hot. -
guykuo replied to the thread Paint my LPR Camera or no?.I used different color spray cans of paint intended for camo. Home depot has them.
-
guykuo reacted to ThomasCamFan's post in the thread Budget Dahua Cams or china alternatives under $100? with
Like.
Custom cgi API Command Tip: In case it helps someone, there is a URI command that disables the Amcrest logo overlay (branding... -
guykuo replied to the thread In ground camera placement ideas.It's really not a matter of the lens angle. It's the IR illuminators output cone touching any nearby objects and reflecting back onto...
-
guykuo replied to the thread In ground camera placement ideas.Only issue I can think of with the rocks being placed is IR back reflection clouding the image. None of my cameras like anything near...
-
guykuo replied to the thread Same form factor as SD1A203T-GN but with better camera?.I replaced one of my SD1A203T-GN with 4MP SD1A404XB-GNR (both from Andy). Definitely a noticeably sharper image in the daytime. Night...
-
guykuo replied to the thread Budget Dahua Cams or china alternatives under $100?.Many thanks for the STL's. I print PETG and polycarbonate here. Should be able to get something to work. That's an elegant looking...
-
guykuo replied to the thread Budget Dahua Cams or china alternatives under $100?.Grabbed two of the Amcrests. Thanks for the tips availability and discount code. Flashed to Dahua firmware..... and definitely a lot...
-
guykuo replied to the thread Ubiquity EdgeRouter X - Configuring to Isolate Surveillance Networks.Sorry to hear it didn't work. Without actual xboxes here, I'm afraid I won't be of much further help with that.
-
guykuo replied to the thread Modification SD49425XB-HNR 4MP, Add 12 Volt Microphone Power Output.Double check that your resistor, capacitor and wiring are not shorted and fit the space available.
-
-
guykuo replied to the thread Modification SD49425XB-HNR 4MP, Add 12 Volt Microphone Power Output.Here is the completed wiring to implement what I drew in the schematic overlay. Resistor and capacitor were positioned to fit avoid the...
-
-
guykuo replied to the thread Modification SD49425XB-HNR 4MP, Add 12 Volt Microphone Power Output.We tap that power with a 480 ohm resistor to limit current draw. The other end of the resistor feeds power out what is normally the 12...
-
-
guykuo replied to the thread Modification SD49425XB-HNR 4MP, Add 12 Volt Microphone Power Output.The +12 volt power is still available on pin 8 of J2
-
-
guykuo posted the thread Modification SD49425XB-HNR 4MP, Add 12 Volt Microphone Power Output in Dahua.Microphone power output mod for a SD49425XB-HNR (running on POE+ power) to provide 12 volt microphone power. Much as I did for the...
-
-
guykuo replied to the thread Ubiquity EdgeRouter X - Configuring to Isolate Surveillance Networks.192.168.93.82 is the source, not destination Also, might need to double check regular UPNP is not also active. delete service upnp...
-
guykuo replied to the thread Ubiquity EdgeRouter X - Configuring to Isolate Surveillance Networks.You correctly understand the config changes made re UPNP2. I'm surprised that one would also need the additional port rules, but you...
-
guykuo replied to the thread Ubiquity EdgeRouter X - Configuring to Isolate Surveillance Networks.I don't have any gaming machines on my network. So, I can't test the following. Basically, you must enable UPNP2 if you are using...
-
guykuo replied to the thread Modification - SD49225T-HN Increase Upward Tilt Range.Over two year follow-up. My upward tilt enhanced Dahua PTZ's are still working fine. This despite over two years of full exposure to...
-
guykuo replied to the thread Bought a SD1A404XB-GNR on Andy's BlackFriday deals and can't seem to power up.Minute or two... Yep. This model takes a much longer time to power up and begin motion range calibrations than any of my other Dahuas...
-
guykuo replied to the thread IPC-HFW5831E-Z5E - Focus reset on reboot.Looking for some of my old posts. Should help get you started. Gotchas are the firmware version of your camera may require different...
