Recent content by HHSquared

Are you using any AI? Is it an ONVIF alert or is BI doing the triggering?

Yup, it is the old GUI (Gray and white). API is: Day: Username: PW@#@10.11.12.10/cgi-bin/configManager.cgi?action=setConfig&VideoInMode[0].Config[0]=0 Night: Username: PW@#@10.11.12.10/cgi-bin/configManager.cgi?action=setConfig&VideoInMode[0].Config[0]=1

I found this thread (attached below) about utilizing HTTP requests to trip cameras into Day/Night mode but for some reason, I cannot seem to make the code work for the Empiretech E541F (AKA Boob cam)...I'm assuming it's since it's multi-channel but cant be positive. Has anybody had any luck...

I’m running hoobs but can’t for the life of me figure out how to display the UI3 dashboard. Tried FFMPEG but didn’t work since I guess UI3 isn’t a technical RTSP stream. Did you manage to import a group or did you import each cameras RTSP stream individually?

Reviving this thread. Did you ever end up figuring this out?

Reviving a thread but did you ever get this figured out? would like to set this up myself :)

@mikeynags It wouldn't let me leave the gateway empty and click "ok", I had to type something in...So I entered in the same IP as the computer and it worked out. Thanks @Sybertiger, after I confirmed mine looked almost identical to your setup, I went to the router logs like @SpacemanSpiff...

Cant seem to figure this out- On LAN & WAN, my UI3 streams without issue (not choppy, no delays, etc) on iPhone or Mac. But when I try to view with Raspberry Pi (using LAN), it's super choppy. Even when I'm out of the network, I can VPN in with iPad/iPhone/Mac and it is very smooth... Anybody...

Looking for recommendations on being able to view cameras somewhere else in the house? (either a monitor, iPad, or table of sorts) Thinking maybe a Raspberry Pi with a monitor... but open to ideas. I do have a POE connection going to that location if it could be helpful...

That worked, thank you!!

Hi all! Recently setup BI, and it appears all is working correct except that I can’t get UI3 to load. I can see the interface but this error keeps popping up. Any ideas?

Sorry that was a typo. I'll edit the post now. It is setup to 10.11.12.1

Hi, I'm struggling to setup my new PC (Running on Win 11) for Blue Iris. I've decided to setup a Dual NIC solution but seem to have some of my settings wrong. Once I connect the NIC1 (which connects to my main router), it only takes about 30 minutes and my entire network goes down. If I...

Thank you for this, it shares a good way to approach it. I've drawn it all out and here is where I've landed. Internet NIC (connected to my main network is 192.168.7.150 Local/POE NIC (connected to POE switch) manually set to 10.11.12.1 (subnet set to 255.255.255.0) with DHCP for DNS Server...

I think I got it setup correctly, but I'm struggling to find my cameras on the network (empiretech). Do you (or anybody else who reads this) know of a way to "Test" that it was done correctly? (Blue Iris does not see anything when I try to add the camera)