Recent content by IcouldSprint

Update: Support says "It appears to be something with the RTSP support in the firmware..". So, no BI for me now ... I'll have to use the program that works without issues.

fenderman: Thank you for that information. I've sent them an email and I'll let the forum know how it works out.

BP2008 - Yes. fenderman: It is my understanding that you have to already purchased the program to get support. I would be happy to work with the developer to fix the problem because, other than the listed issue, I really like BI.

I downloaded another software program and it records and plays back without any problems. I played with the settings in BI and the IP cameras for many hours without any luck. Until the issue is fixed in BI I will have to use the other program. Thanks everyone for your help but I guess it just...

I ran a Wireshark capture and the cameras are still streaming to the computer when BI drops the video.

GW Security GW-2061IP they are 5MP cameras but I'm only running them at 1080P. Thanks

NVR = No video loss / CU is a PC video program that came with the IP camera system = no video loss even with BI running. I'm running 4 cameras on BI at 1920x1080. The cameras are all set to 15fps and iframe set to 15fps. Every 7 1/2 minutes each camera will drop out for 30 seconds one after the...

Ok, let me know if I missed anything important. Schedule = Continuous Clips and archiving = New, E:\BlueIris\new, Limit folder size = 800GB, Delete The other options are set at default ** Camera Properties** General = Default, Network IP, 1920 x 1080, Auto Frame = 27.5, I removed the Date and...

Ok, then there may be another issue. I have another PC program that came with the system and it does not have the same issues. I like a lot of the features of Blue Iris but if it will not work with my cameras then it will be of little use to me. I almost had it working when it had the manual...

I have the same problem and updating to 4.1.1.5 does not help. I have an NVR on the network and it displays and records without issue. I'm using continuous recording for 4 GW-2061IP cameras. The NVR is recording 7 camers. The auto frame rate changes every time you configure a camera and will not...