Recent content by jaclarkaus

Why? Mine are blank on gateway (actually all my cameras are set with blank gateways and fixed ip addresses so cannot get access to internet, also I use a Ubiquity router with these blocked as well, but the logs tell me they no longer connect since setup that way and they work fine.

Would think it has to be logically separate. Only benefit physically separate would be is if someone was going to physically attach the system, like connecting it to the mains I guess. logically separate should stop external access and dialling home.why do they dial home anyway?

1. You can put multiple IP addresses on a single NIC in windows, across different subnets to achieve all that can be done with 2 NICs without the complicated hardware. If you want 2 NICs they can be teamed and then used across 2 subnets anyway 2. I use a Ubiquiti Dream Machine which can block...

Probably Chromatic aberration

My i5 running Windows Server looks like it has given up the ghost. Building a new i5 server: Intel i5 8400 CPU 6- Core ASUS B360M Motherboard 16G DDR4 2400Mhz Ram 650W power and wondering if I should use Windows 10 or Server (got a site licence so both no additional cost) Suggestions?

Fixed, thanks

The Blue Iris Status, Clip Storage page show over allocation as it does not read available space on the drive (heaps available) so it shows overallocation - the directories are actually allocated on 2 different drives, both with heaps of storage. There is no space warning at the bottom of the...

Tony got done for shooting them in the BACK when they were trying to escape, not when he was defending himself. He had an ILLEGAL weapon and had lost his licence prior ..... seems pretty simple to me. Now before you whinge, Australia has similar tight laws to UK and has very little gun crime. I...

Not had luck with any camera other than Hikvision on mine. I run Blue Iris as well

They responded to me. My guess is there is quite a backlog

Set make interval down to .2, still playing with it, but that was number 1 problem. Pre-trigger frames set to 20, now gets cars passing, rather than just tail-lights! No idea where iframe interval section is ... camera seems to only provide 12fps, even if I change the setting to 24fps. Is this...

Found that switch, turn it on so now the Analog cameras start automatically, which is good, but IPCameras still don't. Any other ideas?

In Windows Accessories

When I click on the 'Start all live view' cameras at the bottom of the screen in the web browser, only the active analog cameras start, and I have to go through the IPCameras one at a time, selecting the window, then double-clicking the camera to start it. When I click on "Stop all Cameras' all...

Did not deactivate, just uninstalled (after new server was up)