Recent content by josey

I have a home network setup. 2 Hikvision cameras (DS-2CD2042WD). No DVR. Cameras connected via POE ethernet hub. Connected to an ActionTec T3200M router/modem. iVMS-4200 installed on two different laptops (HPs; one running Windows 7, and the other Windows 10), and on iPhone 7. Everything is...

I think I got it to work. I did as above following reset. Changed the reset IPv4 address and gateway address as noted. The keyed in the new address (192.168.0.64) into the browers. Took me to the Hikvision login. Used the "admin" username and my newly selected password (which I generated in...

have now reset camera. IP address is now 192.168.1.64; gateway is 192.168.1.1 But router/modem is 192.168.0.1 and everything on the network is 192.168.0.xxx So . . . do I change the IP camera IP address, via SADP, to 192.168.0.xxx? and gateway to 192.168.0.10x. Do I change these...

SADP version V.3.0.0.10build20170119 SADP shows camera status: "Active" Password in SADP works. I can change gateway address, and in fact did so (from 192.168.0.1 to 192.168.0.108). I did use a relatively strong pass (with lower and caps, with on single non-alpha character). Not sure what...

uPNP/port forwarding now turned off. Working on setting up a VPN. Don't see how to reset the camera via SADP (i.e., nothing apparent in the software interface). That said, do I keep the apps. open, the camera connected, and simply press the reset button with a paperclip? firmware rev (as...

Bought 4 new Hikvision cameras: Hikvision DS-2CD2042WD-I I am using Windows 10 pro on an HP ProBook 4540s. (But have also tried all of this on my other computer, an HP Elitebook with Windows 10.) Router/modem is Actiontec GT784WN. Connected to the uplink port of an 8-port PoE switch...