Recent content by karlh

I don't think this is limited to just BI. I think it is an Android thing but I hoped someone here might have a solution. I haven't found one on the net. My phone did notifications like I would expect. Then I did a factory reset on it. Now I don't hear any push notifications, including those...

Super. That worked. Missed that when I was comparing settings. Thanks for the info on the encoding. I tried it and it does keep the CPU load down when all the cams are recording continuously.

I have 4 total cams, 3 are active 24/7. Two are the same model Amcrest Wifi PTZ. Both are set identically in BI and in the Amcrest setup software. When triggered both record video. I can see the video in the stored folder. However only 1 shows up in the "CLIPS" pane. I am hoping someone has a...

I appreciate your help today. Thanks so much!

@looney2ns Yes I tried those steps. Thanks for the ideas!

That did the trick on the 1st one!! I now have access to the PTZ function. I had to make a couple of adjustments on the second one before it worked. The "MAKE" on both are now set to GENERIC. Under the PTZ tab I selected "AMCREST" from the dropdown menu. "Use another IP/port" is unchecked...

What I would expect to happen is what happens with every other IP cam that I have used. I uploaded 4 images. Two from attempts to connect to another IP Cam at 192.168.1.114 and two from attempts to connect to one of the Amcrest Cams at 192.168.1.117. Using the IP address with the port I would...

I have tried changing the "make" to others with no success. Using the "FIND/INSPECT" results in the Generic selection being made. I have also tried changing the RTSP and ONVIF ports to 8001 with no success.

I just replaced a couple of FOSCAM standard def IP cams with Amcrest IP3M-941B's. Setup was routine. PTZ works through Amcrest web browser plugin but it does not work on either camera via Blue Iris (BI). I've tried 3 or 4 different camera's through BI and this is the first time that I have...