Get soldering iron, and some pins or wires and solder 4 on CN10( 4th image 1 square hole and 3 round ones), then get serial to usb adapter (ft232rl) and conect them (check with multimeter iwch one is the vcc/live and ground they are 1st and 4th pins), the middles ones are rx tx, you need to test...
I'm not sure but that CN10 on the pcb should be jtag (i can be wrong), solder 4 pins, get an serial to usb adapter and try to see if you can get serial connection
Finally dumped all files using sf read, md.b, binwalk and jefferson and after some troubleshooting(wrong understanting how sf read works) I got the db file from the flash memory (config mtd partition) yay!!!
UPDATE:
I soldered some pins on j25 and got serial comms, I can somehow get inside the uboot and then some sort of root (modifying uboot env params) without Iface BUT it doenst have the files for the web interface/GUI, and with some further research it somehow starts another "machine" on...
Thanks for spending time trying to help me but unfortunately this device doesn't have reset button/pin in the pcb as I said before. And yes strangely it shows a router login page but is a NVR XD
Hi everyone I've been banging my head :banghead: trying to repair my nvr, I forgot my admin password (paranoia of a backdoor and stealing password resulting in a strange password). Tried most superpassword generators, no reset pins/buttons only jtag, and no reset button at login.
If anyone...