Recent content by Lowden27

Yep it was like that since the day we've installed it, 1 month and a half ago. Its temperature is normal, it's in a room with an air conditionner. If it's hacking, if I disconnect it from internet the issue should stop, right ? I'll go back there today and I'll first try powering the cameras...

When I installed them I firstly did this, I let the server give his own addresses to the cameras and I let the default switch settings but still had the issue. That's why I made my own network and disabled the ARP/Ping option but didn't change anything :/ And yeah a 32ch NVR shouldn't be annoyed...

The switch settings are Server IP : 192.168.2.2 Subnet: 255.255.255.0 Gateway: 192.168.2.1 All cameras network settings are : Camera 192.168.2.201-212 Subnet 255.255.255.0 Gateway: 192.168.2.1 Although there's no gateway in the network I set it like this because I already had issues by...

I will try to get a PoE Switch to see if they still disappear.. The cables aren't long, the cameras are all like at a 25-30 meters distance.. Some are even closer and still disappear

They disappear randomly, during the day or during the night, when it's raining or sunny... etc

I'm using the built-in PoE Ports, It's like this because I added them manually and disabled the ARP/Ping option because i thought it could be an issue of why the camera keep disconnecting. So that's why it doesnt say it's using Port 1,2,3 etc

I have a "Enhanced PoE" option, I tried enabling it, it didn't changed anything so i turned it back off

Here's a pic of the registration page. There's 3 cameras off atm I'll try disabling H265

up

I've checked the logs and when a camera disappear I just get a log saying "Network Disconnected" and sometimes a few minutes later I get "User connected(the server to the camera)" on differents channels Sometimes the cameras come back but other times it just never come back until the server is...

Yes they are all 8MP but I enabled smart codec + H265 for all the cameras, 2048kbps of bitrate, 15 fps and I dont use any AI Rules. I've had other NVR with more cameras and same settings and never had this issue...

I already tried to make a factory default and I upgraded to the latest firmware (22-11-22) Imma check the logs and come back with details

Hello, I'm having an issue with a Dahua DHI-NVR5432-16P-I/L . I have 12 cameras on it but they disappear randomly and come back when I restart the NVR. I checked all the cables and remade all the RJ45 plugs but it still disappear randomly. I disabled the ARP/Ping option so I can make my own...