Recent content by lynxnebi

Good eye! I will go ahead and find the right firmware.

I wish that were the case...I can't access its configuration page. I already have my network set to the same subnet as the camera.

The HTTP port using the SADP tool for a hikvision camera is grayed out! I am unable to alter the port, instead it is stuck on port 0. This means I can't access the page to alter settings in anyways...Any idea what is wrong here?

Well I fixed it! All of your help was very useful though. I decided to change the port to 9000. I don't know why 8888 was no good...Nothing is using it. Wait, I think I messed that port up with a port forward range. 8080:8999 all forwarded to the hikvision camera. Thu port 8888 was not available...

Ruppmeister, 1)I am using my externalIP:8888 to attempt to access the login page. I tried it on a phone that isn't connected via wifi and the computer hosting the server. 2)The login works fine within the LAN, I don't even get a login option outside the lan. I turned off ALL firewalls on my...

here we are

Thanks for the advice. Definitely a step closer but still, I am unable to access the blue iris server externally..Only internal. Hikvision remains accessible externally and internal.

I only placed it in DMZ for a moment to test if the router was blocking it. DMZ means no protection, door is open for everyone. I took the screenshots. I hope this is all that is needed. Here is a picture of the blue iris server settings, how I have hikvision setup, and the ports forwarded...

Thank you so much for the speedy reply, thanks for the welcome also. I am using firefox. Canyouseeme.org says that my selected port is closed. I know how to port forward, I have Hikvision streaming outside my network just fine, I can view my cameras remotely. I have tried to setup DMZ settings...

Please help me. I am unable to connect to the blue iris webserver. I am using a Hikvision camera. I am able to connect remotely to the hikvision software, but not the blue iris. Hikvision is using the port 8080 which I can connect remotely to just fine. I selected blue iris to use port 8888...