Recent content by melabum

We had previously installed and configured AVTECH cameras with Blueiris VMS software and they are currently running and working well. For improved resolution, we recently purchased six new AVTECH IP cameras ( models DGM5606 and DGM5406) with 5MP resolution. We have tried our best to get the...

Re: BI installation unnecessarily consuming 90 to 98% of CPU for 12 nos of 2MP camer Thanks bp2008 for that insightful analysis. The operating system is Windows Server 2012 R2. Please, what do you refer to as service mode and local viewer? We have a local PC monitor on the same network with...

Dear All: Our BI installation is with 12 nos.of 2MP cameras. The server is HP DL380 G8, Intel Xeon E5-2620-V2, 6-core (Virtual, 12-core), 16GB. All the cameras are set to "direct to Disk". However, we are surprise that the CPU usage is constantly 90 -98% and this is really a huge hug on the...

The frame rate is 10fps on all the twelve 2MP cameras.

Hi Fenderman: I decided to move my posting to the related postings. The current frame rate is 10fps on all the 12 2MP cameras.

Originally Posted by melabum Dear All, we have a similar situation with 12 nos.of 2MP cameras. The server is HP DL380 G8, Intel Xeon E5-2620-V2, 6-core (Virtual, 12-core), 16GB. All the cameras are set to "direct to Disk". However, we are surprise that the CPU usage is...

Please, note that the server operating system is Windows Server 2012 R2

Fenderman, thank you for the response. We are using full version (purchased version) and not demo. We are not logged in through any remote viewing application. The monitor or viewing PC is connected to the Video Server through web browser.

Dear All, we have a similar situation with 12 nos.of 2MP cameras. The server is HP DL380 G8, Intel Xeon E5-2620-V2, 6-core (Virtual, 12-core), 16GB. All the cameras are set to "direct to Disk". However, we are surprise that the CPU usage is constantly 90 -98% and this really a huge hug on the...

Thank you bp2008. Please, how do we setup the suggested internet explorer to be on default.htm? I guess that this is targeted at reducing the jerking or dragging effect on live video streams on the remote PC.

Hi Fenderman, we have carried out the test as advised and all seems to be good but we still observed a level of delay (time between when action takes place and when it shows or display on the Server screen or monitor). About 3 seconds delay. Also, the live view of the cameras through the remote...

Thank you Fenderman and Q2U for your respective valued information and response. We shall carry out the BlueIris installation as advised and revert with development. We are expectant that live display of the 12 cameras (the video streams) unlike the current NVR (Longvast software) will be...

Thank you Fenderman for the valued response. There are 12 cameras in all and their respective resolution is "1600 x 1200"

Dear All, I am a new entrant and just joined the forum. We bought a Longvast's Granvista IP cameras from Taiwan early this year and it came with an NVR software. However, on installation, we realized that the software is very older that it could not run on Window Server 2012 Operation. It...