Recent content by nambi

  1. N

    Purchased a New Hikvision having some issues adding it in to the PCNVR

    I purchased a new Hikvision Cam to add to my 3-4 year old system. ColorVU DS-2CD1347G2-LUF My NVR is an old discontinued Hikvision PCNVR software. IVMS-4200 My other working Cameras are DS-2CD1143G0-I The camera add in, but I can't get an image on it. When I use batch config tool and install...
  2. N

    Mixing brands of ONIVF camera to work on Hikvision NVR

    thank you, my father had a camera system installed using Dahua N42BJ62 it's a nice cam with Audio, I was thinking about changing over one of my hiks at the front door, and hoping i can use the Dahua, I like the audio feature.
  3. N

    Hikvision stops supporting HikConnect via WiFi on some cameras

    DO you think this will be the future of their doorbell cam too? I was about to buy the doorbell cam, it's only on WIfi. there is not cat6 option for it.
  4. N

    Mixing brands of ONIVF camera to work on Hikvision NVR

    I have Hik setup, I may add a few cams to my system. I use HIK PCNVR (old discontinued), if I buy a different brand of camera that is ONIVF compatible can I expect this camera to work with a Hikvision recording setup whether it be the PCNVR software or a hikvision NVR.
  5. N

    Advice on a system for an Elder

    I've setup several Hikvision systems, now I need to setup my parents who are elder and who have a summer home too far for me to install. I wanted to get the a 4-5 cam system + doorbell cam, NVR etc. I wanted an ONIVF system so they dont' have monthly fees, but regarding the doorbell cam I'm...
  6. N

    R0 / DS-2CD2x32 BrickfixV2 brick recovery and full upgrade tool - enhanced.

    1stly did you set you computer ip to 192.0.0.128? if not it simply will not work, also i use a switch to do this not a router. A switch wont' try to assign it an IP address a router will and the router may assign it an ip address which won't work, A router can act like a switch if you turn off...
  7. N

    R0 / DS-2CD2x32 BrickfixV2 brick recovery and full upgrade tool - enhanced.

    What type of help do you require, have you successfully completed any upgrades? or is this the 1st time? where you able to get the digicap.dev file (mini system) into the camera using the TFTPserver?
  8. N

    R0 / DS-2CD2x32 BrickfixV2 brick recovery and full upgrade tool - enhanced.

    Thanks for the files!! I gave them a test with this, but for some reason this cam just doesn't like them , I think I'm going to toss this cam , i tried everything I can think of As for the bullet cams if I can't ping them or see them on SADP or update FW in tftpserver is there anything else...
  9. N

    R0 / DS-2CD2x32 BrickfixV2 brick recovery and full upgrade tool - enhanced.

    Thank You, I put my files here the originals as well as my mod files, no matter what I do after reboot the cam will not display in sadp, if I put the mini system back i can putty back into the cam, and try again but nothing I do works, I've dome many of these so It's not a issue with...
  10. N

    R0 / DS-2CD2x32 BrickfixV2 brick recovery and full upgrade tool - enhanced.

    I see you have got your cam working do you have the original mod files still I would like to try them in my device that I can't get working, I think I messed up the originals. IGNORE below... Where you able to restore the cam? I have one like yours that i can't get going, I can get the mini...
  11. N

    R0 / DS-2CD2x32 BrickfixV2 brick recovery and full upgrade tool - enhanced.

    Sorry for the terrible explanation I have the "wires" I am talking about are the JST ZH connectors 4 wires I soldered the FTDI232 to these wires but only used 3 of the 4 wires
  12. N

    R0 / DS-2CD2x32 BrickfixV2 brick recovery and full upgrade tool - enhanced.

    i ordered a ftdi232 and the wires that fit into the hik camera board (not sure the model #) they had 4 wires although I didn't connect one I soldered these to the FTDI232 and the FTDI232 is connected to the PC via usb mini cable. using win 7 all drivers for the FTDI232 were installed and it...
  13. N

    R0 / DS-2CD2x32 BrickfixV2 brick recovery and full upgrade tool - enhanced.

    I have 4 stubborn cams that got hard bricked during the process, on I can upload the brick fix tool, but when I try to mod the files the cam takes all the files yet will not show up on SADP it's a ds-2cd232f-is if anyone has this cam could they share with me the original MOD files that were...
  14. N

    Bricked 2CD2032-I no sadp

    Thank you!!! I'll try this week, Hopefully I can resurrect 2-3 of these.
  15. N

    Bricked 2CD2032-I no sadp

    i got all my parts to Jtag the cams, but I'm I can't locate any guides or instruction how to do so, would you have any links that you can share to get me started? Thanks
Top