Recent content by Naptown

Wow, thanks. I have a lot to research. THANK YOU for your quick response and advice of what needs to be changed. I'm more savvy on pulling wires and hanging cameras than anything software related. But - I will definitely look into the BrickfixV2 upgrade before I allow this thing another...

Wow, to my surprise, asdf1234 was the password. What does this mean!?! I changed the password to something very difficult to start...

Perfect. I'll try this 1st step when I get home tonight.

I have a Hikvision DS-2CD3132-I camera that I have used for about 3 years. They are running V5.2.5 build 141201. This was purchased on ebay along with several others and it is clearly a gray market camera. I shouldn't have to state why I bought them, but my budget didn't allow for me to...

Sorry for not closing this thread, but the item has SOLD.

Let's try $40 shipped...

*** SOLD *** As stated, I have a used Hikvision DS-2CD2135F-IS 2.8mm camera for sale. This was used outside for 2 years and then I started getting IR bleed at night. Has a great picture during the day but became foggy at night. Normally I would try a fix for it, but I just replaced it as I...

I knowingly purchased gray market cams as my budget wasn't large. Everything except "record on motion" has been working for 3.5 years. Just looking for a solution so I don't unnecessary fill up the hard drive on the NVR with continuous recording. I guess I should have prefaced my post with...

Fair enough. I did quite a bit of research 3.5 years ago when I installed my system. I didn't have the budget for a "quality" system, but I wanted to be more robust than a wireless Arlo system or similar. I ended up with 5 Hikvision cameras (junk) from eBay and they have worked "very well"...

I figured out that the 2 dahua cameras have a different version of ONVIF. Anyone familiar with the differences? IPC-HDW4631C-A sys.FirmVersion 2.460.0000000.16.R, Build Date: 2017-09-04 WEB Version 3.2.1.491565 ONVIF Version 16.12(V2.4.0.485616). This is the camera where the motion...

I'm having this same problem with a Dahua HDW4631C-A. Previously, I have successfully installed a Dahua HDBW4431R-ZS which is working as it should with motion. I've gone through everything and cannot figure it out. I just have to have that 1 camera 'continuously record' which is going to fill...

I will bump this to the top by adding - I am able to set it to continuous record so I know it's addressable. Just not sure what I have configured incorrectly.

Not sure if I should post this here or in the Exacqvision area. I have an Exacqvision box with 6 hikvision cameras and 1 dahua camera. I'm trying to add another Dahua and I seem to remember struggling with this when I added the 1st dahua. Basically, I've connected the camera via ONVIF (the...

I have a couple of Hikvision DS-2CD3132-I cameras that I have used for about a year. They are running V5.2.5 build 141201. I bought them off ebay and believe they are gray market. I no longer have a use for them and would like to resell them (here or back on ebay). They are both configured...

OK, I just added a Dahua IPC-HDBW4431R-ZS camera to my home network. I have 7 hikvision cameras that I installed and can view remotely. I use my external IP address and a port number. example: 73.xx.xx.xxx:1234 That works for those. I can't quite figure out how to view the Dahua...