Recent content by newfido

On my Nightowl System, when i tell the NVR to record motion it does so without me making any further settings to the camera. On the Qsee System, i tell the NVR to record motion and set the shcedule of every day and every hour. It does not record motion and there is no setting than can be made...

Well usually a NVR compares 2 frames from the camera and then detects motion, all done within the NVR after the video is received. But you do seem to be sure that this NVR needs to ask the camera twice!. I will upgrade someday but not until i find a local store with the camera to test that...

The camera is a Q-See 1080p HD IP Security Surveillance Camera (QTN8031B) - White | Best Buy Canada QTN8031B The NVR is QC NVR Manual - Q-Plus Support Portal They connect via an ethernet cable. The NVR is recording when set to constant but does not record if set to motion detect. I have done...

i have the qc894 nvr and attached a qsee qtn 802b camera, but only manual record will work. motion record will not work with all correct settings set. qsee support does not understand why and said instead of qsee solving the problem that i should splurge and install a large hard drive into the...