Recent content by Ninkasi

check here: HelpHQ Make sure you are getting the correct firmware for that model camera or you could potentially brick the camera.

Have you tried using the password that you used on the NVR for the cameras? I know that on some Dahua NVR's there is an option to automatically apply the password used on the NVR to all of the cameras connected to the NVR. You could also try doing a factory reset.

Thanks mat200

There is an app called Lechange that will work with IFTT using motion detection to trigger different actions. The App works with Dahua products like Montavue and probably Lorex. It may work with others as well not sure though. It definitely works with Montavue as that is what I have and have...

As a last resort, you can see if there is a reset button inside the camera. Most Dahua cameras have them. You will need to disassemble the camera and look on the circuit board. The button will be quite small and is usually located on the side of the board. You will need to have the camera...

Hello, everyone, I am new to this board and look forward to providing my help and maybe getting a few of my own questions answered. I work in tech support and deal with IP based surveillance systems.