Recent content by Nitin

Hello xywy This camera has firmware which is exactly like R2 cameras. Read the big thread of alastairstevenson where he has devised the unbricking/flashing script v2.

As an update to fellow readers - All cams were upgraded to 5.41.1 success. alastairstevenson method of updating 6332FWD was a success. Another feather in his hat. Thank you. PS - Ofcourse I have HxD, and am able to comment on file differences etc by using that. What I was asking you was...

By any chance can you mod the other mtd6?(I already have modded mtd6 of original mtd6 with mac ending in dd) Or if yoh can tell me which bit to chNge(available on this forum) and which block checksum to maintain. Thanks nitin Ps - writing from phone so referring to other 2 donors mtd6 I had...

Ok - Sequentical upgrade til 5.41.1 is working. Ofcourse I am stopping here. prtHardInfo is still 1. My h264+ in fisheye mode exists and enabled. So, if you are assuming that hikvision is going to enforce more checks on mtd in susequent versions - You are assuming correct, proved with this...

DS-2CD6332FWD-I Not booting Took the experience of this guy (and you are helping him too!) and uploaded 5.0.9 digicap. It worked. Back to where I am now - The start of the thread. I have a fisheye which has 5.0.9 - same as I started BUT with lang =1 # prtHardInfo Start at 2018-03-09 09:54:02...

upgrade /digicap.dav [ INFO][MIN]BURN: File size is 25021733 bytes (24435 KB) [ERROR][MIN]BURN: upgrade_from_digicap:file_nums=37 [ERROR][MIN]BURN: upgrade_from_digicap failed I was able to download mtd5 and mtd6. mtd6 is same as your modded one. So, the camera has not touched it. mtd6 - I...

ok- something happened and camera doesnot boot. I am now in recovery shell. I see that davinci folder is empty. Should it be? What are the steps to tftp digicap back into the minishell? Here is where I am - PC address is 192.0.0.128 Cam is 192.0.0.64 Cam doesnot want to pick anything during...

Downgrading by tftp off course I tried it. Says data back error, and 5 seconds later file transfer completed. I am waiting for 30m now to see if it throws up successful. I believe 5.4.5 is the precursor of things to come. Is it possible that 5.4.5 wrote New mtd? Ps using hikvision tftp Will...

hmm - another bad news on this camera - IVMS now refusing to connect saying language mismatch. So, this camera is a brick now. Any pointers on how to recover? Read your detailed guide on brickfixv2. You have put some magic sauce in digicap which is brickfixv2. So, any chance you can make...

Tried to downgrade using IVMS - says language mismatch. Hikvision as usual is putting in more effort in making sure we dont upgrade and Chinese Govt access to our homes remain intact. Well, 5.41 is what I would like to have. I havent lost any functionality though - other than web access (use it...

What exactly is this trap? And I think Hikvision is now checking the other copies(balance 2 copies of mtd6) in 5.4.5 onwards? And, I did gain H264+ in another mode - Fisheye only. Worth the compression (tradeoff on quality)

Curiosity got the cat!! i upgraded to 5.4.5, to language mismatch error!! ivms work though. The language flag is 2 now in prtHardInfo

Success- Upgraded to 5.41 (via 5.3 interim) I didnot gain H265 :( But overall compression/quality has improved. Thank you alastairstevenson Will try to upgrade the balance camera(can you tell me which block crc is to be maintained in mtd5). Now off to the second project 2CD-3942F which is...

Attached is the mtdro(I zipped the whole foder - so it has your modified files too)

Ok - As the camera is now fully operational, the procedure to update is - If you need to update from 5.0.9 to 5.3.5, you need to update "digicap_eng_std.dav" first, then update the firmware 5.3.5. So, any gotchas before?