It seems to be connecting on the TFTP but still getting the Avocent issue and no communication on puTTy. Was using an WinXP machine because that's the only one with a serial port, going to try a Win7 machine now once I get it ready
- - - Updated - - -
2015-11-20 08:16:17 CLOSE UDP 192.0.0.100...
I removed the computer from our domain, enabled the firewall and added all the ports to allow. It still doesn't work, but I am no longer dropping UDP packet as per the firewall log.
Next I am going to try removing any programs that may conflict with COM port settings.
I just checked the specs on the 9016 it says it has a RS-232 DB9 serial port on rear panel, to which I am connected. I will try enabling the firewall when I'm back at it tomorrow. Thanks for the help so far I will let you know how it goes.
Yes it has a serial port. I have tried with the cable from the laptop to the NVR as well as using a null modem USB to Serial and nothing is showing.
Those are the settings I am using both on puTTy and in device manager. The IP on SADP is 192.0.0.64 and I have the laptop set to 192.0.0.128...
I keep getting the same error as others in this post:
[2015-18-11 07:42:02] TFTP server [192.0.0.128] initialized
[2015-18-11 07:42:25] Connect client success [192.0.0.64]Success
[2015-18-11 07:42:25] Open file failure[C:\tftp\econt_Vision-AV2000]
I tried to upgrade the firmware, put in the...