i would try to connect to it with batch config tool on your pc and just flash the original firmware again.
you could also install the app again login with your original credentials and if the doorbell is missing from your account just scan the qr code on the doorbell again it should add the...
Sorry for the late replay yes if got DB1 from ezviz the old model.
i dont know what they changed in the new firmware. one thing im sure about it still not supports ONVIF. that's why i noticed the auto upgrade. it failed to connect to home assistant.
Get onvif trigger events = checked
Cameras digital input or motion alarm = checked
at first i also checked until reset but sometimes the motion wont reset so it stay’s triggered. So i disabled that but in picture its checked
Oké strange. Im not abel to look right now but I’ll let you know if mine stopt working but i had no problems with it so far on this firmware. On earlier firmware it did not work.
I didn’t use any special settings only the onvif motion detector options checkbox in blueiris. I’ll send some...
anyone installed new firmware? Today my ezviz db1 updated automatically to 211011 and i lost the onvif option. So i put it back to 200321 but i tough it was strange that the hik fimware would see an eviz fimware update. But the install went without noticing untill I noticed that onvif stopt...
I used 24v this transformer emat everything works great EMAT beltrafo 8V 12V 24V - 8VA (E10123)
i had problems with older transformer 12v didn’t work or just until some pressed the doorbell button. Or the chime wouldn’t stop ringing. Then i read somewhere that this transformer works great with...
i have the same issue with ezviz and blueiris but i only have it with the 4 ezviz bullet cameras. A soon as i view the cam from the ezviz app the view in blueiris changes if i stop viewing in the ezviz app it changes back to normal instantly. My db1 with hik fw doesn’t have that problem i only...
First update to v19.1.11.15.3-20201230 then after that you can go to device info and see that it say software version 19.1.61xxxxxxx and now you can update it again with the latest version v19.1.61.16.19-20210508. all you need you can find here www.ipcam.xin at the bottom of the page.
I don’t really know what your talking about. But I fixed my problem i had the same device as mentioned above but my software version was v19.1.11.16.3-20201222. But i wanted v19.1.61.16.19-20210508 and the guid says the first three set of numbers should be the same. But what I needed too do was...
i had exact the same issue last week with my Ezviz DB 1 with hik firmware after working fine 12 months or so. i did just rest the device with the button. but when it came back up it was back to softtap_ SSID and i cloud not connect to it with batchconf to change it to ezviz. so i clould not...