Recent content by Rapido

Thank you TonyR, I will give that a try. I have also contacted Viofo support. They want me to upload a video of the problem. :rolleyes:

I have just installed a Viofo VS1 dashcam together with the wireless Bluetooth remote control button. Bluetooth pairing of both devices worked perfectly, but the connection has funny problems. When I start the car, the button may work ... or not. I do a new pairing and it works on the first...

I have 3 Amcrest IP2M-841-V3, that I'm also using with the Onvier App. After the recent DST change, that changed the time in Germany from GMT+1 to GMT+2, the PTZ control from within the App did no longer work. The logs showed theses errors: "Wsse authorized time check failed." but as the time...

Thank you for your thoughts and answers. I brought the cam from the garage to my desk and did the following: gave it daylight --> keeps rebooting disabled "Auto Reboot" --> keeps rebooting use other PS (3,0 A) --> keeps rebooting set it to "Factory Default" --> keeps rebooting I hardly can...

Thank you, will try another PS and a factory reset as well. Cam has no internet access, so DDoS is unlikely. WiFi connection is usually sufficient, but not optimal. So I already considerd the recent solar storm to interfere here. Wild guess.

Thank you wittaj. I just remembered the camera log and found out while looking it up, that the cam is periodically rebooting, thereby obviously turning the light on/off. So what might make it reboot over and over again? Poor power supply?

I got an Amcrest IP2M-841-V3 in the garage, that at night turns on the IR light every couple of minutes. The time varies between 4 and 10 minutes about. I know this because this triggers another camera (Blink mini) to start recording a video. So every night I end up having lots of clips from...

Thank you Tony. I checked Nogosoft and they write: "The (personal) Data is processed at the Owner's operating offices and in any other places where the parties involved in the processing are located. " :oops: They don't disclose, where this is, but probably China. I'm wary regarding software...

Thank you. Good starting point. (fwiw, Onvier is written wrong there.)

I got 3 Amcrest IP2M-841-V3, that I operate only within my private network (no internet access). With my Android phone I use the Onvier App to monitor the cams and I am very satisfied with it. Unfortunately the App is not available for iOS. Can anyone recommend an equivalent free...

Thank you Gary. Favicon Changer for Edge did the trick. :thumb:

Is there a way to place the file favicon.ico in the main directory of my Amcrest cam IP2M-841-V3 (ftp or such?), so that the image would show up in the browser tabs and next to the favorites?

Thanks for your suggestions. :thumb: I'm using Onvier on my mobile phone to check the cams. I think it would fail when that garage cam would have another network. I have created a shortcut to reboot the cam (192.168.178.222/cgi-bin/magicBox.cgi?action=reboot ) when I notice, that the cam has...

Thank you Tony. Yes, that's the prereq for a mesh network. Two different SSIDs result in two different networks, making it harder to manage the cams.

Although there is a close repeater (mesh network) my IP2M-841-V3 sometimes prefers to connect directly to the router and the connection then is worse as it would be with the repeater. I can't see that the cam supports Access Point Roaming. Question to Amcrest Support: Is there any chance that...