Recent content by Revo2Maxx
-
Amcrest AD410
To be honest the AD410 and the AD110 should not be changed from any 3rd party software or hardware. To be honest not even from the Amcrest Software that it says things can be changed using the Amcrest Ip config tools but if you do it will make the camera unstable and do a Constant Reboot. Then... -
UNIFI—The Best Option...?
Something you have to ask yourself.. Why don't they say what F/Stop that camera is using? My guess is a f/2.0 and with as stated before the sensor is great for 4mp and sure I have some 4k cameras with that sensor and worse even but with better f/stop and so low light is ok not great.. Then one...- Revo2Maxx
- Post #3
- Forum: IP Cameras
-
Dahua WizColor COMING SOON!
Anyway love to try new things lol so upgraded to new FW, now gives Stay Detection and Loitering Detection as IVS rules that can be added, before only tripwire and intrusion was offered. Looking at update details says this as well and some other things not sure I understand yet. Edit: Something... -
Dahua WizColor COMING SOON!
02-21-2025 current FW for the camera or is that just the released FW? -
My IPC254EB-DX22GK-I0 is damaged?
Well this is fun.. I have not repaired any Uniview cameras with bad Uboot and methods that work on other cameras just caused me to hard brick this camera.. I no longer even have a uboot shell anymore lol.. Well this is really fun. So right in the middle of downing a image update that I thought... -
My IPC254EB-DX22GK-I0 is damaged?
Well darn.. Not sure how to recover it now lol.. Data below is from Putty, It cycles every 3 to 5 minutes.. I can not stop it from doing the full cycle and nothing happen from key presses. [WDT] Enalbe WAT... -
Replace fan on Q6125-LE
Replaced a good few fans in my PTZ cameras over the years. One of my Samsung cameras was hard to find the right fan and I had to install one that was the right voltage and seized squared but where I had an issue was the fan in my case had a very small depth and seeing the fan was smaller then... -
Dahua WizColor COMING SOON!
Hate it when they keep the same model numbers as older cameras with inferior sensor size.. I mean I seen Amazon selling one that looks like the new they are calling it an S5 model but has the 1/2.8in sensor even though it has the top mounted red/blue leds. How is anyone supposed to know they are... -
My IPC254EB-DX22GK-I0 is damaged?
Well that didn't work, lol. I asked Uniview for FW for my camera, they were nice enough to send me one dated 2025, mine was from 2023, but thought they knew what they were doing. Now camera is dead. Powers on, shows network data but now iris is closed and never opens or anything happens when... -
Nosey neighbor?
My guess is they didn't mind the other cameras seeing they are looking away form his property. He might have had an issue just didn't trip out about it because the cameras were not facing his house. Now with the Turret under the roof pointing at his house he thinks you want to watch him lol I...- Revo2Maxx
- Post #43
- Forum: Pics & Videos
-
Adding cameras to NVR via single cable
So here is one of my switches mounted on 2 POE NVR, far right are the 2 uplink ports 1 going to bottom NVR and second going to my giga lan 24port switch. In my case you can see 8 poe connected devices in orange with green for data, right 2 green is for data on the uplink ports. I have another... -
Adding cameras to NVR via single cable
Your NVR should have the Option for Bridge Mode. Loads of people wouldn't use it but in your case. I would.. Few things to keep in mind.. First you will need to setup all your cameras for your Local Lan IP range, This means that all your cameras will be open to your LAN.. Next you will want to... -
Remove login on Dahua network keyboard and automatically display camera
Because of the security issues that a Keyboard can cause Dahua has Enabled the Complex setup to keep the end user better secure.. Way and easy setup for Lab type setup if you will is to setup your password with something that is easy and fast to enter into the keyboard. like Aa123456! That is... -
how to block wind rumble physically - wheres mic
Well I do have some of mine Enabled on cameras that the wind hits the camera from left to right and if it wasn't enabled it would be nothing but wind.. Right now looking at a day with a good amount of wind and while there are some Gust of wind that makes it well known that it is windy out. Able...- Revo2Maxx
- Post #9
- Forum: IP Cameras
-
Can't seem to connect an Axis camera to Annke NVR
So a couple of things. My camera while I can use as 1080P it is a 6mp zoom camera.. So to reset the factory if you need to, remove power, Press and hold button, restore power and keep holding for 20 to 30 seconds until the light blinks amber.. However keep in mind that you don't have a default...- Revo2Maxx
- Post #6
- Forum: NVR's, DVR's & Computers
