Recent content by rtificial

Same here :-( Can't find any way to reset the password. For some reason, I can still access the video feed from Hik-Connect and on the indoor station, and I can unlock the gate from both the indoor station and Hik-Connect, but the doorbell cannot be used, as it fails to connect. :-(

I'm facing the same issue. For some reason, I can still see the video feed in Hik-Connect and on the indoor station, and unlock the gate. But I can't connect to the KD8003 in iVMS, can't reset the password, can't update the firmware. I have no luck downgrading the firmware through tftp. I can...

I see. Still requires a wall socket though, so you'll have cables running over the wall. I managed to take the power from the lightswitch below the indoor station on the same wall, so run the wires behind the plasterboard.

That's quite a large PSU it seems? Are you able to hide that somehow?

So what I have done is the following: I did not have an ethernet cable close to where I wanted the KH8350 indoor station, but wifi was available of course. All my lightswitches are pulse-switches, connected to a 12-strand cable running as a star network from my main fuse box. All lightswitches...

I installed my kd8003, with keypad and cardreader plus my indoor station today, and it seems everything is working as expected. Was just wondering if anyone has found a way to add IP cameras to the indoor station which are not from Hikvision? I have a couple of Dahua's, but I can't get the...

Ah I see. Ok, so, in the NVR, you don't have the option to change the settings? Generally, I guess the network configuration prevents you from seeing these devices. Normally, I would suggest connecting the devices to a POE switch, as well as your PC, and assign your PC an IP address in the same...

@etcha From iVMS, in Device Management, you can open the settings of the device by clicking the cogwheel at the end of the device line. In the settings, go to System Maintenance. In the System Management section, click the Restore All button.

I run the DS-KD8003-IME1 powered by a Ubiquity Unifi PoE switch, 802.3af/at, and it seems to power it just fine. Meanwhile, I also managed to get my setup working with the Hik Connect app, so when I press the call button on the KD8003, it will ring on both the indoor station and the Hik Connect...

Hmm, okay, it's a different issue than mine. I don't get a notification at all. Not visual either. Anyway, anyone who can help me with a step by step plan to setup this combination of devices?

I'll check that, thanks. You mean on the KH8350 device? Or in the App? Cause in the App, I get no notification at all. Notifications in iOS are enabled for the App.

It's connected to the KH8350 indoor station.

Not sure. Are you saying that I should configure SIP with a PBX to make the Hik Connect app work? I thought this was more related to connect the KD8003 to a PBX and have the doorbell call normal phones or doorstations which are connected to this PBX. As I tried to explain, when I press the...

I have recently bought the following set : KD8003 video intercom, KH8350 indoor device, a DS-KD-M and a DS-KD-KP. The KD8003 is connected to a PoE switch, the KH8350 to a 12v power supply and the Wifi, and the KD-M and KD-KP are connected to the KD8003. I can connect to the KD8003 and KH8350...

Ok, so only by either changing out my I/O module, or by changing out my PIR's? So what does this Sealevel Device do what my current I/O module cannot do? [edit] Right, I see an older post with a screenshot now, and see BI has a specific Sealevel configuration. This seems to be using the...