Recent content by Scottda99

I have the 7616 I series with accusense cams but can’t get it working. I have it working with the same type cams but the NVR is a 7616 K series

Hi all, did anyone get to the bottom of this, i have exactly the same issue in that i dont see the human or people filters. I have a DS-7616NI-I2 / 16P on the latest firmware

Hi all, so have had my setup for a while now, but just beginning to explore smart events now. DS-7616NI-I2 and multiple DS-2CD2387G2-LU cams Recording on continuous, have 5 cams with motion detection, all working fine. Setup 3 of my cams with line detection, that works too. However in Hik...

@alastairstevenson - just a quick note. I figured it out in the end as to why I didnt have the green multipoint lines. I had my VCA resource set to monitoring, as soon as I changed that to Smart events i get the green multipoint area now in basic event setup. thanks Darren.

@alastairstevenson, thanks again. Its very odd that I dont see that. To be honest, I'm only raising this for two reasons 1- When I set up my sisters I had the green lines, but I don't 2 - When I was reviewing some YouTube videos, I see people using the green lines to create the area.... I...

@alastairstevenson, firstly thanks for taking the time to respond, I really appreciate it. Re the monitoring area, I am connecting directly to the cams already via a web session to the cam IP address, but still see red box grid, not the ability to create the green multipoint area? thanks...

Hi all, I have 5 DS-2CD2387G2-LU cams and all working fine with a DS-7616NI-I2. However, I have a few questions if anyone can help me. I am running the latest firmware on the cams V5.7.14 build 231028 I am looking for a bit of advice on events, basic vs smart if anyone can help. 1 - I have...