Recent content by tensoneu

I would recommend getting a 8 port passive POE injector, https://www.amazon.com/WS-POE-8-48v60w-Passive-Ethernet-Injector-Cameras/dp/B0086SQDMM/ref=sr_1_1?ie=UTF8&qid=1472963341&sr=8-1&keywords=wi-fi+texa Provides flexibility on non-POE ports from routers or switches. I have the above paired...

Not sure how small/mini you want but what blake recommend is a good choice. If it's mini I would probably go with the HP ProDesk 600 G1 via ebay: i5-4590T (Should be more than enough for your 6 cameras) i7-4785T I have an alienware alpha (i7-4790) with 6TB external drive in a USB3 enclosure...

MiB- requesting a catalog when you can. Thanks!

You can also use a POE injector if you want to use it with an existing switch. Using a 16 port D-Link gigabit switch + 8 Port PoE Injector from Wi-Fi Texas...

In one of my recent configuration, A PC is running Windows 10 Home haven't ran into any issues with updating yet. The PC is setup with the following: 7x PoE IP Cameras @ 4MP 15fps [Records Motion Detection, not 24/7, on all cameras] - For a 24 hour time frame it's averaging roughly about 14GB. -...

In case anyone else is looking for this model camera. The cameras I received do not support the listed 1920p resolution. According to tech support they received a "wrong batch".

I contacted tech support for the formatting of the RSTP stream. After entering it into VLC here are the results: 1) Main Stream (5MP setting): Type: Video Codec: H264 - MPEG-4-AVC (part 10) (h264) Resolution: 2688x1538 Display resolution: 2688x1512 Frame rate: 15 Decoded format: Planar 4:2:0:YUV...

The short answer is yes, but it would be redundant. All the features of your NVR will just be on the NVR. Same with BI on the PC. If you like BI then I would personally get rid of the NVR. As for your current PC, it sounds like you don't really need to upgrade but optimize your settings for...

When setting the 5MP setting on the camera the frame rate only allows up to 15fps setting max (this can't be changed higher). The only thing I can think of is maybe the resolution on the camera is really 2688x1520 @ 5MP or BI isn't handling the resolution properly. The only other thing I can...

It's the only HD camera I have, and the picture is very clear compared to the other cheap IP cameras I have. Also the resolution BI sees at 2688x1520 is higher in the Horizontal (even higher than 2592). These are the other resolutions listed: 5.0MP - 1920P@15fps Pixel 2592(H)×1920(V) 3.0MP -...

I have the following camera: http://www.newegg.com/Product/Product.aspx?Item=2P0-000J-00083 According to the specs at 5MP it should support the following resolution: 2592x1920 After setting it to 5MP in the settings of the camera, entering in the resolution 2590x1920 manually in BI will not...