Recent content by triXter

  1. triXter

    Amcrest NV4108-HS Not Able to Show All Streams

    Thanks for all the help! Was not able to resolve it but came up with an interim solution that seems to work for me: TinyCamPro on Fire TV Stick. Does what I want and beats having to get a new NVR (for now).
  2. triXter

    Amcrest NV4108-HS Not Able to Show All Streams

    Unfortunately this did not help. I checked the streams with a black screen and selected M, S1 and S2 and neither of the streams would show up for any camera after the first 4. What's most interesting is that when I go to Sequence view (where I am displayed 9 camera streams), all of my 7 streams...
  3. triXter

    Amcrest NV4108-HS Not Able to Show All Streams

    Did have it on 265 and brought it down to 264 for both main and substreams. A couple of the camers had 264, 264B and 264H. Any recommendation which one I should be using?
  4. triXter

    Amcrest NV4108-HS Not Able to Show All Streams

    Not sure about the 4KS2 model, since mine just says 4108-HS. I believe this is the link to the product page for the device I have: Amcrest NV4108 1080p Wireless NVR (4CH 1080p/8CH 720p) Network Video Recorder (Black) - Supports 8 X 720p (1MP) IP Cameras OR 4 x 1080p (2.1MP) IP Cameras @ 30fps...
  5. triXter

    Amcrest NV4108-HS Not Able to Show All Streams

    Yeah, no issue with SmartPSS as well for me. Even with NVR liveview for 7 cameras (1 main and 6 sub stream), it can only do 4 which is disappointing.
  6. triXter

    Amcrest NV4108-HS Not Able to Show All Streams

    Tried playing with it a bit more without any luck. I think my only option at this time is to find another device to do the video output (probably Raspberry Pi). Have an old system that I guess I could use for Blue Iris but that seems overkill for now.
  7. triXter

    Amcrest NV4108-HS Not Able to Show All Streams

    That's my take too! It's 8 times less (I use 4096 on main stream per camera) so I imagined that 6 substreams would be sufficient if I could previously run 4 livestreams at main stream.
  8. triXter

    Amcrest NV4108-HS Not Able to Show All Streams

    Thanks! I was able to do that on SmartPSS but when I went back to the NVR, it shows that it is using the Main stream. I tried to manually set it to substream 1 and most of the streams were not loading. Not sure why but below is the typical setting I have for each substream: Encoding: H.265...
  9. triXter

    Amcrest NV4108-HS Not Able to Show All Streams

    Thanks! I got all my Dahuas from Andy so I don;t think they're Lorex versions. I'll go ahead and use substreams for all and see if that helps. Just to ensure I'm on the same page, on the livestream page, if I manually selected all substreams and see a degradation in quality, can I assume that...
  10. triXter

    Amcrest NV4108-HS Not Able to Show All Streams

    Hello I have an Amcrest NV4108-HS and for most parts, it's working well. I have 6 Dahua cameras currently connected to to it and looking to add an old Amcrest and another Dahua shortly. All cameras are max 2MP / 30 fps. The NVR is connected to a TV (720p) and outputs a livestream to this TV...
  11. triXter

    Review-OEM IPC-T5241H-AS-PV 2mp AI active deterrence cam

    Would love to know this too. From the videos, it seems to be on par?
  12. triXter

    Review-Dahua Starlight IPC-HDW5231R-ZE 800 meter capable ePOE

    Crisis over :) Had Smart Codec enabled. Turning that off resolved the issue and I can see IVS.
  13. triXter

    Review-Dahua Starlight IPC-HDW5231R-ZE 800 meter capable ePOE

    Just got my camera and was setting it up before mounting. I notice users talking about IVS and I see it being mentioned in the manual as well but I do not see it in my camera settings. Am I missing something? System Version 2.460.0000.15.R, Build Date: 2017-09-07 WEB Version 3.2.1.492613 ONVIF...
Top