Recent content by Turboolds

  1. T

    Bought New 5208-8P Andy/EmpireTech

    I brought camera inside. Reset it, still nothing on new nvr, works fine on old
  2. T

    Bought New 5208-8P Andy/EmpireTech

    i setup the nvr, connected my cameras 1 by 1, only have 4, they are older Dahua IPC-HDW4421MP, got 3 to work, and the 4th one wont work. it gives out an ip 10.1.1.67, shows for a split second, then says network disconnected, failed to find network host. I tried with old nvr and it works fine...
  3. T

    Connection failed, away from home.

    are you using dahuaddns? had same issue seems they shut it down. I had to use open-ip now
  4. T

    Dahua nvr advice

    I have a 4 ip camera nvr poe setup, all dahua ipc cameras 4mp. Need a new nvr poe. Any advice on which model i should go for, my old one is dahua 4208-8p, seem like its flaking out. Keeps skipping days of recording, time never stays correct. Any help is appreciated
  5. T

    4208-P NVR, 4 4MP Ip cameras, 2Tb, Need more storage

    what should be my bit rate? i have set for 4096, is that ok?
  6. T

    4208-P NVR, 4 4MP Ip cameras, 2Tb, Need more storage

    any reason why i would lose recording time?, possible hard drive crapping out?
  7. T

    4208-P NVR, 4 4MP Ip cameras, 2Tb, Need more storage

    ok thanks for the help, will do,
  8. T

    4208-P NVR, 4 4MP Ip cameras, 2Tb, Need more storage

    Hello i have an older 4208-p with 4 dahua 4mp ip cameras, set to highest resolution ,30fps, 2tb of storage. I am only getting about 4 days of recordings. Should i be getting more, i feel like it used to record much more, like 2 weeks. I checked the hd and both are functioning, but under the hd...
  9. T

    Cant connect cameras/ invalid password help

    Ok got them back up had to reset thru the camera shorted the 2 pins in camera. Thanks for the help now i gotta setup everything again. Any tips or suggestions? Should i enable upnp?
  10. T

    Cant connect cameras/ invalid password help

    I think i may have unplugged the cameras and put into different ports. I used the same passwords for all 4, but i used a different password for the nvr itself.
  11. T

    Cant connect cameras/ invalid password help

    So your saying that the nvr should also be on the same subnet as the cameras? My router is 192.168.1.1, if i put the nvr to 10.1.1 will it work?
  12. T

    Cant connect cameras/ invalid password help

    Yes they all have ip 10.1.1.65-68 and the nvr has 192.168.1.17. I tried the admin default no luck
  13. T

    Cant connect cameras/ invalid password help

    Hello and thanks for your help in advance. I have 4 dahua ip cameras hdw4221m and dahua nvr 4208-4p, working fine, changed 1 hardrive from a 500 to 1tb. Now cameras wont connect keeps saying invalid username/password, if i go in and change them thru web interface i get account locked after i try...
Top