IMOU camera with Dahua NVR

Hello,
does IMOU camera work with Dahua NVR ex. 4208-4KS2? I just need live view and playback.
Thanks in advance.

akur said:

Hello,
does IMOU camera work with Dahua NVR ex. 4208-4KS2? I just need live view and playback.
Thanks in advance.

Click to expand...

Hi @akur
IMOU = Dahua

So if you have a IMOU IP PoE cameras which has an available rtsp feed .. perhaps even a WIFI camera that has a rtsp feed .. should work. iirc some IMOU cameras are cloud only .. so depends on the model

You should be able to test the camera if you have the camera using Dahua OEM SmartPSS

mat200 said:

Hi @akur
IMOU = Dahua

So if you have a IMOU IP PoE cameras which has an available rtsp feed .. perhaps even a WIFI camera that has a rtsp feed .. should work. iirc some IMOU cameras are cloud only .. so depends on the model

You should be able to test the camera if you have the camera using Dahua OEM SmartPSS

Click to expand...

Thanks!

For now, on NEWEST firmware of DAHUA NVR, IMOU cameras doesn't work with DAHUA NVR

Maybe anybody knews how to change that?

Then you should first describe why you think this is the case. What exactly is meant by the latest NVR firmware. Where exactly is your problem and what have you already tried?

I bought a DHI-NVR1104HS-S3/H
I immediately updated its firmware. So I don't know how he would have reacted to the IMOU camera at first time, before update.

After that, I connected the IMOU camera to the system and went into SEARCH.

There the system received my IMOU camera. But instead of the PRIVATE protocol, the system in the SEARCH window offered me only the ONVIF protocol.

I waited. Nothing changed. I added this camera by double clicking in the SEARCH list. The camera was added (the passwords on the DVR and the camera were the same)

After that, I added the camera in the "manual add" mode. At the same time, I specified the PRIVATE protocol and port 37777.
I registered the login and password as on the NVR.
After clicking "OK" the camera appeared in the camera line.
But she has a RED dot glowing.

I hovered my mouse over the red dot and received a message:
"Failed to login. Please access the device with ONVIF."

As an experiment, I tried the wrong password. Received a message:
"Wrong username or password"

There are no other protocols in this NVR except PRIVATE and ONVIF.
If you know how to solve this, please let me know.
(Motion detection currently works very poorly.)

After updating my Dahua NVR4104-4KS2/L i run the same issue. The new firmware called DH_NVR4x-4KS2L_MultiLang_V4.003.0000000.0.R.240321
Even using ONVIF i failed to get video from the IMOU camera.
Fortunately, i have old firmware backup (it was good idea to have one!) so i have performed rollback succesfully...
Any ideas what is going on?