DO NOT UPDATE DS-2DE4A425IW-DE

I wish Hikvision updated this PTZ with a better sensor. Loved that it is enclosed and you can barely tell from a distance where is it pointed at.
 
  • Like
Reactions: Veinless
Hi, any idea how to fix problem with DS-2DE4A425IW-DE 6 auto tracking, latest firmware V5.7.11 build 230612, it looks like impossible to downgrade firmware .Thanks
 
Hi, any idea how to fix problem with DS-2DE4A425IW-DE 6 auto tracking, latest firmware V5.7.11 build 230612, it looks like impossible to downgrade firmware .Thanks
Seems that the only way to fix the auto tracking is to change your camera.
I haven't seen a single camera where it works as it should (every time, or even almost every time)
 
Hello my fellow HikVision owners!
Just created the account here as I read your tips before and felt the need to help back.

I have a great salesman who helped me with getting my hands on a working FW with “Smart Tracking” still in the menu!

I have JUST downgraded my DS-2DE4A425IW-DE (S6) to FW 5.7.11 build 220831 from FW5.7.11 build 220905 (this one do not have tracking!)
Have attached the FW.5.7.11 build 220831 with Smart Tracking as a zip file.
Thanks for uploading that file, i was able to downgrade my DS-2DE4A425IW-DE from V5.7.11_230612 to 220831 using batch config tool. Restoring smart tracking ability.
 
Hello, I also have a PTZ camera: DS-2DE4A425IW-DE with firmware:
V5.6.0 build 190128
and encoding version:
V7.3 version 190105

Smart tracking has not been working for me for a while now. In the software there is a checkbox for Enable Smart Tracking.
Can I get this back with a different firmware version than I have now?
 
Last edited:
Been following this thread as I have a DS-2DE4A425IW-DE that started to not return to position properly after it tracked. This started late last year after working brilliantly for the past couple of years. I would reset the tracking and it worked okay only to have it within a day or two start doing the same not return properly after tracking. I looked at the firmware upgrade only to see that Hikvision have removed the smart tracking option. I ended up turning smart tracking off. Doing more googling, I see Hikvision have discontinued this camera and replaced it with a DS-2DE4A425IWG-E, which is identical to the 425IW-DE except now says it doesn't false alarm and now has AI for face and car detection. Maybe Hikvision became aware of the 2DE4A425IW-DE fault with tracking and first decided to remove it by firmware update on existing camera's and discontinuing it's sale and replacing it with the 425IWG-E. It say's in the spiel "Focuses on human and vehicle targets classification based on deep learning" and elsewhere it doesn't false alarm. I am considering buying it to replace the 425IW-DE. If I do I'll write a report.
 
Well, I purchased the DS-2DE4A425IWG-E. Smart tracking is very good. Doesn't false alarm on waving bushes or birds. Picks up humans and vehicles and zooms in and locks on them. Doesn't lose what it is locked onto unlike the previous camera. Panning, zooming and tilting is very good. The tilting up I believe is better as it seems to go higher than the previous camera and I believe it zooms in closer. The specs for this camera match the other camera but as I said, the tilt and zoom is better. I am happy with this camera.
 
  • Like
Reactions: johnfitz
The tilting up I believe is better as it seems to go higher than the previous camera and I believe it zooms in closer. The specs for this camera match the other camera but as I said, the tilt and zoom is better.

I think the older camera defaulted to 0 degrees max tilt... the new one defaults to -5 degrees:

Screenshot 2025-05-08 111325.PNG

I am happy with this camera.

I got it a few months ago, and I've been happy with it too... would be great if they could increase the sensor size to 1/1.8" for this form factor.
 
  • Like
Reactions: monaro