Search results
-
SD6AL433XA-HNR Laser PTZ Tracking Issue
Video compression is not a concern, I have twin 10 TB WB Purple Drives and very little activity up here. -
SD6AL433XA-HNR Laser PTZ Tracking Issue
BigRedFish: Do you think changing my encoding would help? I would do anything to get mine running like yours, please let me know how to make it happen sir, thanks. -
SD6AL433XA-HNR Laser PTZ Tracking Issue
Thank you guys for your help last night. In regards to a resource issue with the NVR, I just went in and made sure and actually had to change a couple of the spotter cams to H265 encoding, Smart Codec off, Resolution 1920*1080, 15 FPS Bit Rate Type CBR, with matching IFrames, and 4096-bit rate... -
SD6AL433XA-HNR Laser PTZ Tracking Issue
Round #2: I did not put an SD card in it and I doubt there is one in it from the factory. I am using Smart PSS to render recordings/playbacks. Below are some adjustments based off of your comments and thank you wittaj for responding. -
SD6AL433XA-HNR Laser PTZ Tracking Issue
I really wish I knew why it is skipping frames and going fast forward on the video. -
SD6AL433XA-HNR Laser PTZ Tracking Issue
Tree is DOWN! Only changes made from the previous settings listed below. I can make the laser intensity much stronger but it blossoms the person even more. -
SD6AL433XA-HNR Laser PTZ Tracking Issue
Video 1 and 2 have the following settings: (note, by lowering the laser angle it will bring more light further away, and for reference, the guy never got closer to the camera than 300 feet due to it not tracking the subject. The third video has... -
SD6AL433XA-HNR Laser PTZ Tracking Issue
Agree but no additional (white) lighting is allowed. There are no outside lights in this entire area, you may notice in the video, as she was walking last night I was talking to her on her phone's earbuds telling her to go left or right due to how dark it is with no moonlight or flashlight... -
SD6AL433XA-HNR Laser PTZ Tracking Issue
The videos were perfect in SmartPSS when I watched them but when they are exported you get these fast-forward bursts for a second or two, any idea what is causing that? -
SD6AL433XA-HNR Laser PTZ Tracking Issue
One more setting I forgot to attach: -
SD6AL433XA-HNR Laser PTZ Tracking Issue
I am uploading 3 different videos from last night (hopefully - new modem should fix past upload issues, will see), the first is possibly too bright and tracking did not work. The second one below is better but no tracking. The tracking issue could have been me in there... -
Proper Wiring Ubiquiti NanoStation NSM5 - Help Please
Yes sir, it's plugged into the Station and the Access Point is plugged into my router so I can connect to both of them. -
Proper Wiring Ubiquiti NanoStation NSM5 - Help Please
Good point Flintstone61, I was thinking what I was looking at was max capacity not actual. -
Proper Wiring Ubiquiti NanoStation NSM5 - Help Please
RedFive: Below is from the station using 10MHz width but I notice my TX/RX Rate has dropped from 162 Mbps at the 20/40MHz width (Access Point at 40MHz width setting) but signal strength is at the max. Also below is a picture of the Access Point, any help to get my Mbps up to 300 like yours... -
SD6AL433XA-HNR Laser PTZ Tracking Issue
BigRedFish: I hope your Mom is doing better and if it's not raining I will get some video tonight. -
SD6AL433XA-HNR Laser PTZ Tracking Issue
UPDATE: I installed the second 433XA PTZ and noticed how much clearer the picture was than the first one I installed several weeks back. So I decided to climb the tower with some cleaner and clean the lens on the first camera (the pictures above are from the first camera). I cleaned the lens... -
-
Proper Wiring Ubiquiti NanoStation NSM5 - Help Please
Interesting, I plugged the Access Point back into the NVR after hooking the LAN connection from the PoE injector for the Nano into my router so I could get the screenshot above from the Nano and now the NVR has the camera offline. I'll go down and cycle the power to the PTZ and see if it comes... -
Proper Wiring Ubiquiti NanoStation NSM5 - Help Please
Redfive: This is the access point above with the antenna mounted inside looking through a window. The station is 600 feet away and 40 feet lower in elevation. When I tried lowering my channel width at the access point to 10MHz it lost connection with the station. Any thoughts? -
Proper Wiring Ubiquiti NanoStation NSM5 - Help Please
TonyR: Unbelievable knowledge I picked up from you guys, it really helped me begin to understand networking, wifi, routers, etc which I am fascinated with. I really wanted to learn each aspect of it and gain some understanding of how it works, so no, if I had to do it over again I would have... -
Proper Wiring Ubiquiti NanoStation NSM5 - Help Please
I power cycled the PTZ and came back to the residence and the NVR sees it now and everything is working perfectly! THANK YOU Catcamstar, TonyR, Redfive, Flinstone61, Wildcat_1, Jessie_Slimer, you made my month and a long month it has been on this end. Great job, I really appreciate it, and... -
Proper Wiring Ubiquiti NanoStation NSM5 - Help Please
Catcamstar: Yes sir, Port 10 on the NVR is plugged into the LAN port of the Ubiquiti PoE injector. I have put no static IP address in the camera and I will go down there now and power cycle the camera and reply back. -
Proper Wiring Ubiquiti NanoStation NSM5 - Help Please
TonyR: I went down to the Station/Bridge, connected my laptop and tried to access the internet, no joy. I then logged into the Nano and found the WDS not enabled. I enabled WDS and then tried the internet again and it connected no problem. I hooked the PTZ back up to the PFA1200 and the... -
Proper Wiring Ubiquiti NanoStation NSM5 - Help Please
TonyR, for some reason I didn't see your post earlier, the answer is no, I do not know what I'm doing in setting up this bridge, any help would be greatly appreciated, and thank you for your response. -
Proper Wiring Ubiquiti NanoStation NSM5 - Help Please
Redfive & Flintstone61: Thank you for your replies, I have the Nano's paired and installed. I'm using WPA2-AES for security, I have the SSID and password working and I made their IP static and changed it to one that would not cause a conflict. The problem I have is my NVR (NVR5216-16P-I) does... -
Proper Wiring Ubiquiti NanoStation NSM5 - Help Please
Thank you Jessie. I'm still wondering how to manage the wiring once inside at the residence where the NVR is located, do I use Option 1 or Option 2? PS: I took the other 2 options off the original post since receiving your post Jessie since they are not applicable. -
Proper Wiring Ubiquiti NanoStation NSM5 - Help Please
This afternoon if all works out and I make it home, I will have the pleasure of hooking up my PTZ with your help. My question revolves around setting up the Nanostation as described in the title of this post. The below is a drawing of what I think would be correct for the "Client" located at... -
-
Andy - Empire Tech Review
I was lucky and found IPCamTalk and was able to spend the time to read and learn. One of the first things I learned was Andy is the guy that could hook you up on the latest technology quickly and affordably. The dilemma I now faced was what cameras and NVR would be used for the unusual... -
SD6AL433XA-HNR Laser PTZ Tracking Issue
Wittaj: You fixed it, changed "Type" to "Remote" instead of "Local" and it works PERFECT!!!!! Thank you Wittaj, BigRedFish, and Ljw2k for all your help, you guys were patient and willing to invest your time and share your experience to help and I do appreciate it.