Search results

  1. S

    IPC-Color4K-T180 Intermittent 'No Signal' in BI

    Since turning off the watchdog, I've tried to look at replays to find IF I'm still getting the blips, and for how long, but this isn't exactly easy to find. Before I would wait for the NO SIGNAL to pop up and could replay to that time stamp, but without the watch dog I'm watching through...
  2. S

    IPC-Color4K-T and IPC-Color4K-T180 230227 Firmware

    Can you please share the details or point me to the thread where I can find these details?
  3. S

    IPC-Color4K-T180 Intermittent 'No Signal' in BI

    Sorry to bump, but you guys got any thoughts about disabling the watchdog? Thanks! @wittaj @fenderman @JDreaming
  4. S

    IPC-Color4K-T and IPC-Color4K-T180 230227 Firmware

    Mine gets a No Signal error every 8-10min. Recent ongoing thread here: IPC-Color4K-T180 Intermittent 'No Signal' in BI
  5. S

    Color4K-T and (T180) Wall Bracket

    The PFB203 appears correct according to Andy's listing for the IPC-Color4K-T180 :
  6. S

    IPC-Color4K-T180 Intermittent 'No Signal' in BI

    Well, unchecking "Interpret Monochrome video as signal loss" didn't fix the problem but turning off the Watchdog entirely by unchecking "determine loss of signal" sure did the trick. I had zero No Signal errors overnight. Turned it back on this morning and had a No Signal error within 10...
  7. S

    IPC-Color4K-T180 Intermittent 'No Signal' in BI

    "Interpret Monochrome video as signal loss" was the only option checked in that tab. I unchecked it and will report back in the morning. After that I might even try unchecking the entire watchdog "Loss of Signal" and see what happens... Thanks!
  8. S

    IPC-Color4K-T180 Intermittent 'No Signal' in BI

    Unfortunately that didn't do the trick. But thank you!
  9. S

    IPC-Color4K-T180 Intermittent 'No Signal' in BI

    Thanks, didn’t even know that config page was there nor do I know what any of those settings do! I turned off CGI and Genetec to match yours. I’ll see if that makes any difference… EDIT: Running a newer version of BI 5.7.9.11 as I updated in hopes it would fix something.
  10. S

    IPC-Color4K-T180 Intermittent 'No Signal' in BI

    I would forget about it and move on if it wasn’t for the fact that I “lose” a good 30sec of recording every time it happens. When I replay the recording through a no signal event the replay appears to freeze (camera time stamp doesn’t move) and then jumps ahead to where BI picks back up. This...
  11. S

    IPC-Color4K-T180 Intermittent 'No Signal' in BI

    I've been running the ping tracer for about 6 hours now. In that time I've had 40 "No Signal" errors (which is one every 9 minutes). Over 20,000 successful pings, 0 failed, and no packets lost. The highest ping was around 36ms, I replayed that timeframe in BI to see if there was a...
  12. S

    IPC-Color4K-T180 Intermittent 'No Signal' in BI

    Thanks, I'm running this now and will report back.
  13. S

    IPC-Color4K-T180 Intermittent 'No Signal' in BI

    Here are the settings I've been running since I first setup the camera. My network setup is the same as your, Cam to POE switch, switch to NIC 2 in BI machine.
  14. S

    IPC-Color4K-T180 Intermittent 'No Signal' in BI

    Any other suggestions or is down to BI support as a last ditch effort? Is it safe to let BI remote in to my system so they can see the under the hood analytics on what is causing the no signal issues?
  15. S

    Damaged outdoor CAT6 cables?

    It looks like they cut into the inner insulation while stripping off the outer insulation. It doesn’t appear deep enough that any wires were nicked but I would definitely return it if I were you. Like you said it could lead to damage down the road. Being that it’s so close to the end they could...
  16. S

    IPC-Color4K-T180 Intermittent 'No Signal' in BI

    Good questions. 23awg Southwire solid copper CAT6, installed, patched, and terminated myself using EIT/TIA 568B standard, no flat cables. I'm no expert but I've been in computers, network, and electronics for a good 20 years. I figured if one of the cables, patch cables, connections, etc. was...
  17. S

    IPC-Color4K-T180 Intermittent 'No Signal' in BI

    On replay in BI, it appears I lose about 35 seconds of actual recording every time it drops out with 'No Signal'. If it was a couple seconds I wouldn't care but a lot can happen in 30 sec. @wittaj Thanks a bunch for the links. As much as I searched I never came across those posts. That is...
  18. S

    IPC-Color4K-T180 Intermittent 'No Signal' in BI

    I won a IPC-Color4K-T180 in Andy's last lottery and it's been installed for the past couple months. I’ve been having issues getting intermittent “No Signal” errors on BI. It appears to happen randomly and averages about every 10 minutes or so. The issue is only with the IPC-Color4K-T180, and...
  19. S

    I caught me a Looky-loo

    Doubt it. Zoysia is also a warm season grass we don’t have much up here in Indiana and Ohio (where I’m from). We are starting to see some of those get planted in this region, mixed w other grasses, as the annual temps warm up year after year as they are summer heat/drought tolerant.
  20. S

    I caught me a Looky-loo

    Looks like OP is in Indiana so I doubt St Aug. as that’s a warm season grass. I’m guessing KBG or a KBG Ryegrass mix based on the fine blades but I’m no expert.
  21. S

    I caught me a Looky-loo

    Kick ass lawn! I love the circular mowing pattern in the back yard. That’s gotta be tough to keep right around the fence, etc. I too am a lawn snob but with 3.5 acres to mow surrounded by fields of weeds and rodents I have to let something slip.
  22. S

    Send Pushover notifications with pictures and hyperlinks

    Thanks, that was the piece I was missing. It's working now. Much appreciated!
  23. S

    Send Pushover notifications with pictures and hyperlinks

    Could someone please explain a very basic yet critical part of the script from post #1? You must replace the placeholders YOUR_APP_TOKEN_HERE and YOUR_USER_KEY_HERE. What are these placeholders? I made an account on pushover, using my email address, and they sent back a "user key" which is...
  24. S

    BI slow/inaccessible when off local WIFI

    Thanks for your replies. My VPN is always on whether at home or away. So I should be getting the BI snapshots, right? I started reading about the pushover app recently and that's part of my latest learning process along with using UI3. I just checked and my upload speed on home internet is...
  25. S

    BI slow/inaccessible when off local WIFI

    I'm still a bit of a noob but learning a ton thanks to this forum! Been laboring for a few days, searching and reading posts, to better streamline my remote viewing and alerts. I have two, soon to be three, cameras on a dedicated BI computer, dual NIC setup, and Zerotier installed for remote...
  26. S

    CodeProject.AI Installation Issue

    I had an old version of .NET Framework. Updated .NET, uninstalled and re-installed CPAI and now it shows up in BI and runs as a service. Looks like I got it figured out...
  27. S

    CodeProject.AI Installation Issue

    Hey all, I'm new to cameras and Blue Iris but have been reading A LOT and playing around with my first camera, an IPC-T5442T-ZE from Andy. As I continue my learning journey I wanted to start playing with some simple AI to recognize vehicles and alert when a vehicle entered the driveway that was...
View older results
Top Bottom