Search results

  1. bertnl

    IVS Rule Config Tripwire IPC-HFW5442T-ASE-NI no email Empire Dahua

    Thats correct 10.1.1.85 until 68
  2. bertnl

    IVS Rule Config Tripwire IPC-HFW5442T-ASE-NI no email Empire Dahua

    I just did after your mail. I will retry, but at this moment quite heavy rain here.
  3. bertnl

    IVS Rule Config Tripwire IPC-HFW5442T-ASE-NI no email Empire Dahua

    The camera's are al Dahua and plugged in to the NVR DHI-NVR4208-8P-4KS2 V4.001.0000003.1, Build Date: 2020-08-13 The NVR can send a test mail that I confirmed and I also get healt mails at the correct interval but no trip wire mails. I can see the trip markers in my recordings And those...
  4. bertnl

    IVS Rule Config Tripwire IPC-HFW5442T-ASE-NI no email Empire Dahua

    I wish I got an email. I am fighting with this for days . See also How to Upload vidoe clips with Dahua HI-NVR4208-8P-4KS2 ? I gethealth mais from the NVR But no events so far, Tripwires work. Also When I go in the camera settings and add the same mail credentials the camera fails in sending a...
  5. bertnl

    How to Upload vidoe clips with Dahua HI-NVR4208-8P-4KS2 ?

    Thanks, so far:) I will try to find any solution with search although this is sometimes a bit tough, as I am not a native english speaker
  6. bertnl

    Is there anyway to disable Dahua e-mail message: Alarm Event: TripwireStop ?

    I wish I got an email. I am fighting with this for days . See also How to Upload vidoe clips with Dahua HI-NVR4208-8P-4KS2 ? I gethealth mais from the NVR But no events so far, Tripwires work. Also When I go in the camera settings and add the same mail credentials the camera fails in sending...
  7. bertnl

    How to Upload vidoe clips with Dahua HI-NVR4208-8P-4KS2 ?

    Thank you again FastB I looked in the unwanted mail folders on the receiving end and there was nothing from the NVR. I now changed to another mail server for the NVR which also tested with succes wit the test button. This a server that I also use for webhosting and which I control myself a bit...
  8. bertnl

    How to Upload vidoe clips with Dahua HI-NVR4208-8P-4KS2 ?

    Hi FAstb, Yes it is helping me and this makes it also a bit obvious why I and maybe other people get lost in the interfgace. It has been some time ago that I have this system setup. And lately I thought it would be quite easy to steal the NVR with all the recordings for a burgler The interface...
  9. bertnl

    How to Upload vidoe clips with Dahua HI-NVR4208-8P-4KS2 ?

    I have set that the tripwires are activ for every day 24hours and I also see the red events in the timeline. Here some screenshots from the desktop. The strange thing is there is also an email set of parameters in the camera stettings under network I can also enter SMTP setings When I...
  10. bertnl

    How to Upload vidoe clips with Dahua HI-NVR4208-8P-4KS2 ?

    I have email configured under network on the NVR.I tested it this and it works. But when I try this with event config with the same setting the test mail fails. I tried this from smartpss and fron the desktop. Maybe I do something stupid here ?
  11. bertnl

    tripwire not triggered during night?

    OK I will look if that makes the difference. About the manual setting of light I will need 3 timezones. Day , Start of night. Deepnight. A start of night my garden ilumination is switched on when the sun goes down and the light gets low until 2AM and is then switched of. But I see only...
  12. bertnl

    tripwire not triggered during night?

    Thanks Sebastian, But what does this calibration do? Ik got inthe past a feeling thus was used to in some detail add contours of fourniture in a room?
  13. bertnl

    tripwire not triggered during night?

    Thanks for helping with this. uploading the clip stops at 5% The clip size is to large I guess I tried saving in MP4 I only need 30 seconds to show but with the scissor tool I seem only to be able to set the start point? How to set the endpoint? But what is the benefit of that global setup? I...
  14. bertnl

    tripwire not triggered during night?

    I found the part of the clip and try to upload it. I will try to play with the settings. I already left the automatic exposure. But I do not understand the global config you are referring to
  15. bertnl

    tripwire not triggered during night?

    I forgot to mention, in the recorded stream I saw a man running to the door and back I try to find the clip but it is hard when there is no evet in the stream and I do not remember wicht day . I only know I was in bend so night time ;) The immage is not that bad I tink due to the bright street...
  16. bertnl

    tripwire not triggered during night?

    Hi , This week while in bed there was a 'funny guy' that ring the bell and run away while we where in bed. I got up dut did not see anyone I went to the PC to look wat actually happened. To my surprise there was not a trigger in the stream of the frontdoor cam. Dahua camera: l IPC-T5442T-ZE 4MP...
  17. bertnl

    How to Upload vidoe clips with Dahua HI-NVR4208-8P-4KS2 ?

    I can see my time line and the recording and see events. But want to sent clips around the event to a server using FTP or so? Greets, Bert
  18. bertnl

    How to Upload vidoe clips with Dahua HI-NVR4208-8P-4KS2 ?

    Thanks all for the answers. Hi OK so I can mail those clips and photo's. Could I also FTP them to a server? GReets, Bert
  19. bertnl

    How to Upload vidoe clips with Dahua HI-NVR4208-8P-4KS2 ?

    I have the |NVR connected and the program on my PC. I can do a manual export of the recorded stream of a camera. But that is manually as far as I understand from the doc I would like to store some clip of about 60 seconds around the trigger automatically.
  20. bertnl

    How to Upload vidoe clips with Dahua HI-NVR4208-8P-4KS2 ?

    Hi I have this system working for some time now wit a few cams and I had quite some links on how to configure things but those got lost due to a crash. I would like to upload a short clip of the cams when there is an trip wiretrigger. Is that possible and how? What are the requirements for the...
  21. bertnl

    A.I. in dahua NVR-4208-8P-4KS2H1 and IPC-T5442T-ZE Which to use? Subject updated

    I have read That post and followed it to configure.:) And the help with the event recording helped a lot;) just got the idea that smart PSS would make event enabling more versatile;)
  22. bertnl

    A.I. in dahua NVR-4208-8P-4KS2H1 and IPC-T5442T-ZE Which to use? Subject updated

    and is it better to use smartPSS for configuration ? Or only for (re)vieweing and searching? I see many more things hat I can enable in the event config here? It looks indeed much better
  23. bertnl

    A.I. in dahua NVR-4208-8P-4KS2H1 and IPC-T5442T-ZE Which to use? Subject updated

    Thanks a lot for this great info/ I have smartPSS installed but not really tested it yet. Is that also user for configuration like tripwires? I am still in the config state. Now in the camera events window on IE I see Videodetection and Smart Motion Detection I have enabled both but there is a...
  24. bertnl

    A.I. in dahua NVR-4208-8P-4KS2H1 and IPC-T5442T-ZE Which to use? Subject updated

    Thanks, I'm gonna try this. I changed some schedules , I did not realize that those also had to be configured.
  25. bertnl

    A.I. in dahua NVR-4208-8P-4KS2H1 and IPC-T5442T-ZE Which to use? Subject updated

    @EMPIRETECANDY You are correct it is NVR4208-8P-4KS2, wrong copy paste from order history . But how sould I configure the NVR such that I see IVS events in the seracht timeline?
  26. bertnl

    A.I. in dahua NVR-4208-8P-4KS2H1 and IPC-T5442T-ZE Which to use? Subject updated

    YOu are correct it is NVR4208-8P-4KS2, wrong copy paste from order history
  27. bertnl

    A.I. in dahua NVR-4208-8P-4KS2H1 and IPC-T5442T-ZE Which to use? Subject updated

    @EMPIRETECANDY I still cannot see the IVS events in the search window as described earlier, what am I doing wrong? Searching on the time line was one of my main reasons to buy an NVR
  28. bertnl

    A.I. in dahua NVR-4208-8P-4KS2H1 and IPC-T5442T-ZE Which to use? Subject updated

    @Shockwave199, Yep. When I uncheck the green regular playback it is all empty, And I have already checked the box for the IVS. When I only checked the box here for IVS (tripwire events) there are no events visible. I really have no clue what I am doing wrong
  29. bertnl

    A.I. in dahua NVR-4208-8P-4KS2H1 and IPC-T5442T-ZE Which to use? Subject updated

    I still do not manage to see the events in the 'search' time line. I can see tiles in the IVS search but not in the normal seach panel. I have IVS the events box cheched but notching there, just thegreen stream that I can scroll through
  30. bertnl

    A.I. in dahua NVR-4208-8P-4KS2H1 and IPC-T5442T-ZE Which to use? Subject updated

    Yes this is a POE camera. I was testing with a separate supply before because I did not have a PVR yet. That took much longer to arrive. At that time I connected the cam to my normal switch and opened 192.168.1.108. there I went to the TCP settings and set it manually to 192.168.1.151. for the...
Top Bottom