Search results

  1. T

    Drives overallocated even after rebuilding DB

    So my drives always say over allocated, even though I have 230GB of free space, I did some googling and there was a post that said BI thinks the files are still there if manually deleted and you have to rebuild the DB, so I did that, and I still show overallocated. How do I get rid of this? Also...
  2. T

    Unable to Connect, Reason: IP Banned!

    That did it, thanks. No idea how I banned myself, my login is saved.
  3. T

    Unable to Connect, Reason: IP Banned!

    Morning, I went to remote view my cameras from my phone like I always do and it says my IP is banned. I know I didn't ban my own IP, and it couldn't have been from failed attempts at logging in or anything. I don't see anywhere where there is a ban list or anything like that. What's the story...
  4. T

    Easiest ways to view BI on remote monitors inside home?

    what weather app do you use? Did you run the power cable behind the wall? Or is it just hanging down plugged in
  5. T

    Easiest ways to view BI on remote monitors inside home?

    Any issues leaving those 10's on 24/7?
  6. T

    Easiest ways to view BI on remote monitors inside home?

    Hey guys, I'm wondering how you all go about viewing BI remotely on home monitors? I have my surveillance server and main monitor up in my office, but I would like to have a low profile wall panel downstairs with cameras on it. How do you guys go about doing this? Same with TV's in the house...
  7. T

    Does Blue Iris Play Nicely With 360 Cameras?

    Guess that settles that. Do you happen to have any reccommendations for wide angle low profile indoor dome IP cameras for ceiling mounting? Amazon has too many to choose from
  8. T

    Does Blue Iris Play Nicely With 360 Cameras?

    Looking to finally replacy my 4x Amcrest wifi cams with 4x 360 Cameras from Amcrest. Wondering if BI plays nicely with 360 cams, and does things like Dewarping etc. Anyone have any experience
  9. T

    Does anyone have any reccommendation for High FOV POE dome cameras that are pretty low profile?

    Just looking through amazon they all seem very consumery and not commercial grade. Does anyone have any low profile dome cameras they reccommend? Couple hundred a piece at the most would be good.
  10. T

    Camera playback @ 1x speed is very slow and choppy, then super fast, then slow and choppy. Settings issue?

    Looksoke my network (pattys) is the only network using those channels. Patty's but att is my fiber modem but nothing is really connected to that. So what's my best option? Dedicated router for these devices? Ethernet over Power? I'd love to poe but I just can't.
  11. T

    Camera playback @ 1x speed is very slow and choppy, then super fast, then slow and choppy. Settings issue?

    So uh... how bad is it doc? Looks pretty bad - Interestingly enough the one camera .123 looks okay, but it's connected to a different 88U in the garage acting as a Mesh Node. That looks BAD
  12. T

    Camera playback @ 1x speed is very slow and choppy, then super fast, then slow and choppy. Settings issue?

    The nuc is hardwired in and I'm using an ASUS RT-AC88U. It's hardly an entry level router, but not state of the art. It was nice in 2015. lol Should I just update the router? I can't believe a few wifi cams zipping low bitrate video 24/7 would throttle the network on that thing. But maybe they do.
  13. T

    Camera playback @ 1x speed is very slow and choppy, then super fast, then slow and choppy. Settings issue?

    The simple thing would be to add another ethernet port and dual NIC it, but I doubt there is room for it? If not, then use the built-in ethernet port for the cameras and add a USB ethernet for your internet. Wait doesn't my NUC already have dual NIC? It has a i219-LM and i210-AT controller...
  14. T

    Camera playback @ 1x speed is very slow and choppy, then super fast, then slow and choppy. Settings issue?

    @wittaj Thanks for the write up, and I'll agree with you, wifi cams are not the way to go - unfortunately it's my only option right now. I understand I can't ELIMINATE my problem, but what are my best options for ALLEVIATING? As far as the NUC goes, I don't think it's the problem It's a 2TB...
  15. T

    Camera playback @ 1x speed is very slow and choppy, then super fast, then slow and choppy. Settings issue?

    Thanks for the help! 1. This issue happens in the Blue Iris application itself (you are not remote viewing)? Yes 2. Are you viewing via a local physically connected monitor or via some kind of remote desktop connection? Viewing on the BI computer itself on the monitor connected to the BI...
  16. T

    Camera playback @ 1x speed is very slow and choppy, then super fast, then slow and choppy. Settings issue?

    They are wifi cameras, Amcrest IP4M-1041B. Copy, will set to 1 hr. It's an INTEL NUC8I7HVK with 32GB of ram and a 2TB NVME Drive. Should be more than powerful enough, yes?
  17. T

    Camera playback @ 1x speed is very slow and choppy, then super fast, then slow and choppy. Settings issue?

    Just as the thread reads - when I play back and video it plays back super slow and choppy then it goes really fast, like it's fast fowarding, then goes back to slow and choppy. I thought this may have been a bandwidth issue, but I checked and it is not. I think it may be a frame rate /...
  18. T

    Is it possible to have BI installed on TWO PC's, only recording to PC one, but bieng able to view on PC two?

    ahm bummer - thanks guys.
  19. T

    Is it possible to have BI installed on TWO PC's, only recording to PC one, but bieng able to view on PC two?

    Kind of a confusing question. I have my main Blue Iris PC that's in one part of my house, but I would like to also view and watch videos on my office computer, NOT through the web UI. I assume it's possible to have BI installed on two places at once and be able to read from the cams at both...
  20. T

    Worlds First Review - Dahua DH-IPC-PFW5849-A180-E2 - Dual Lens 180 Degree Full Color 4K (8MP Stitched) Camera

    Time to just put a pole in the middle of your front and back yard. Bingo bango.
  21. T

    Are there any guides for using (Video Game Joysticks) As PTZ Controllers?

    I also have PTZ controls set to USB in my camera setting as shown here
  22. T

    Are there any guides for using (Video Game Joysticks) As PTZ Controllers?

    Allow me to be more specific - I specifically am referring to page 197 of the BI help file.. it just tells you to do where I am currently at. Nothing beyond that.
  23. T

    Are there any guides for using (Video Game Joysticks) As PTZ Controllers?

    I did do a lot of searching and checked through the wiki but I couldn't find exactly what I'm looking for. Where exactly are you pointing to? Where I am now is - I have the joystick detected in BI, and it just says "Calibrate before you can use it" I calibrate it, and still can't use it or...
  24. T

    Are there any guides for using (Video Game Joysticks) As PTZ Controllers?

    I keep reading online about people using joysticks, xbox controllers, etc to control the PTZ on BI. I can't seem to find any guilde or walkthrough on how to do it. I've got a spare Thrustmaster Warthog HOTAS lying around and figured why not give it a shot. Anywhere anyone can point me?
  25. T

    Blue Iris Camera Compatibility.

    Oh god that sounds like a pain in the ass running Ispy and all that. I do not want to run through RTSP
  26. T

    Blue Iris Camera Compatibility.

    Hello - I'm trying to replace my 6x Amcrest Indoor Cameras, with something smaller, and with a wider FOV. I purchased two sets of smaller cameras and neither works. I really like this pair I purchased but can't seem to get them to work - what do I need to look for in order to determine if a...
  27. T

    Rolling "No Signal" issue

    The camera is the same network, all running off Asus RC88U's How do I see the ping from BI to the cams?
  28. T

    Rolling "No Signal" issue

    So I have blue iris and I have 9 cameras. I have this issue where every several minutes a random camera will go into a "no signal" state for a few seconds then pop back. This is seemingly random and doesn't occur in any one specific camera. 3 of my cameras are wired, and 6 are wireless, the...
  29. T

    Trigger settings to prevent bugs setting off alarms?

    Evening all, I did some looking and couldn't really find an answer. I have a problem with all my night cams constantly going off and recording because of bugs flying in front of the screen. How should I set my settings to prevent these things from happening? I figured it would be pixel travel...
  30. T

    Kitchen (Cam 1) is recording but videos don't show up in alerts tab?

    I simply rolled back to 5.5.9.6 and it worked... haha, thanks
Top Bottom